ProgramMaster Logo
Conference Tools for 2024 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2024 TMS Annual Meeting & Exhibition
Symposium Energy Technologies and CO2 Management
Presentation Title Research on Using Carbide Slag to Mineralize the Carbon Dioxide in Electrolytic Aluminum Waste Gas
Author(s) Xiao Yadong, Liu Yan, Ting-an Zhang, Fang Yu, Li Xiaolong, Wang Kun
On-Site Speaker (Planned) Xiao Yadong
Abstract Scope This study proposes the technology of using waste carbide slag to treat carbon dioxide in the tail gas of electrolytic aluminum, and innovatively designs a Venturi gas-liquid-solid three-stage reactor. The results show that the residual proportion of CO2 in the waste gas is below 0.08% through the absorption of three stage reactor, and the time of absorption can be largely shorten compared with the single stage reactor. As the gas velocity increases, the volumetric mass transfer coefficient gradually increases, and the CO2 utilization rate, average bubble diameter, bubble rising speed, and local gas holdup all decrease first and then increase. As the apparent liquid velocity increases, the volumetric mass transfer coefficient and CO2 utilization rate reach their maximum values at a liquid velocity of 1.504 m/s. The average diameter of bubbles first decreases and then increases, while the rising speed of bubbles and local gas holdup show an opposite trend.
Proceedings Inclusion? Planned:
Keywords Modeling and Simulation, Recycling and Secondary Recovery,

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Clean Production Metallurgy - Chlorine Metallurgy: A Review
A Review of the Extraction of Gallium From Bauxite Ores
A Strategy for Reaching Net Zero
An App to Set the Path to Net Zero in Foundries
Analysis of a Chemical Looping Combustion Sistem Through Computational Fluid Dynamics
Analysis of Factors Influencing Energy Consumption in Long Processes and Energy Reduction Techniques
Application of Fiber Optics in Metallurgical Processes, Temperature Monitoring of Metallurgical Furnace With Distributed Temperature Sensing (DTS)
Benchmarking of Energy Consumption and CO2 Emissions in Cement Production – A Case Study
Design and Research of Three Stage Reactor of Carbonation Process of Calcified Residue
Effect of Fe2O3 on Blast Furnace Coal Combustion Under Local Oxygen-enrichment
Fused Alumina Production From Non-metallic Residue of Aluminum White Dross
Innovation and Application on Low-carbon Ironmaking Technologies at Shougang
Life Cycle Assessment for the Mining and Metallurgical Industries: Issues and Challenges
Lifecycle Environmental Impact Assessment of Swarf Recycling Routes for Additive Manufacturing Applications
Low-energy Processing of a Local Boltwoodite Ore as Intermediate in Nuclear Fuel Cell
Low Energy Process Development for Chibuluma Copper Tailings
Modeling Carbon Composite Briquette Reaction Under H2-H2O-CO-CO2-N2 Atmosphere
Numerical Investigation on H2 Reduction Characteristics of Fe3O4 in Drop Tube Furnace
Pathways to Reduce Operational Carbon Footprint in Secondary Aluminum Melting
Phase Equilibria and Thermodynamic Properties of Selected Compounds in the Ag–Ga–S–AgBr System for Modern Application in Energy Conversion Devices
Pore Engineering and Surface Functionalization of Biochars From Sugar Beet Pulp for CO2 Capture
Preparation of a Low-cost Tremella-like 3D Carbon Nanosheet With Superior Adsorption Properties for Gallium(III)
Production of FeCr and FeCrNi Alloys With an Energy Saving Route
Reaction Behavior of High Rank Coal With Different Particle Sizes in Coal Gasification and Ironmaking Poly-generation Process
Research and Development on Low Carbon Technologies of Modern Blast Furnace Ironmaking
Research on Using Carbide Slag to Mineralize the Carbon Dioxide in Electrolytic Aluminum Waste Gas
Seawater Electrolysis Enables High-quality Carbon Removal
Should We Lightweight Electric Vehicles? A Life Cycle Perspective With an Outlook to 2050
SmartMelt Reduce Energy Consumption and Process Efficiency of Melting Process by Intelligent Deep Learning and Digital Twins
Technoeconomic Analysis of Supercritical Fluid Extraction Process for Recycling Rare Earth Elements From Neodymium Iron Boron Magnet
The Synergistic Extraction Kinetics of Aluminum and Silicon From High-alumina Fly by Carbochlorination
Use of Over Stoichiometric Flame for Post-combustion, Burning VOC and Solid Fuel, Improving its Efficiency and Reducing the Carbon Footprint in Regular Lead Recovery Rotary Furnace Process

Questions about ProgramMaster? Contact programming@programmaster.org