ProgramMaster Logo
Conference Tools for Materials Science & Technology 2020
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting Materials Science & Technology 2020
Symposium Additive Manufacturing: Materials, Alloy Development, Microstructure and Properties
Organizer(s) Prashanth Konda Gokuldoss, Tallinn University of Technology
Zhi Wang, South China University of Technology
Jurgen H. Eckert, Erich Schmid Institute of Materials Science
Filippo Berto, Norwegian University of Science and Technology
Scope Additive Manufacturing (AM) s one of the emerging fields, which is seen as the manufacturing process for the future. AM continues to attract attention of professional communities including research, design, and process engineers. However, more research is required to fully understand the capabilities of these processes and the correlation between process conditions, process parameters, microstructure and other material properties. Another main challenge is alloy development, where it has been realized that alloys specific for additive manufacturing processes should be developed in order to completely utilize the benefits of these additive manufacturing processes. This symposium will focus on materials, alloy development their processing, properties and microstructure for the different AM processes. In addition, emphasis will be placed on understanding the capabilities of the processes and the correlation between process conditions, process parameters, microstructure and other material properties. We invite papers on alloy design and materials development, processing of materials, microstructure and the resultant properties of AM materials. Suitable topics for this symposium include, but not limited to: - Ferrous alloys including steels - Al-based alloys - Cu-based alloys - Co-based alloys - Mg-based alloys - High entropy alloys - Intermetallics - Metallic glasses - Metal matrix composites (including cermets and ODS alloys)- Precious metals-Polymers, etc.
Abstracts Due 05/31/2020

3D Characterization of Intrinsic Defects in Water- and Gas- Atomized 17-4 PH Stainless Steel Powder Precursors for Additive Manufacturing
A New Sintering Process for Binder-Jet Printed 625 Alloy
Additive Manufacturing of Metallic Materials: Mechanical Properties
Additive Manufacturing of Nuclear Spacer Grids
Characterization of the Balling Ddefect during Laser Powder Bed Additive Manufacturing
Co-design of Parts and Processing for Thin-walled Structures Produced via Laser Powder Bed Fusion
Effect of Atomization and Processing Gas on Microstructures in Additively Manufactured 17-4PH Stainless Steel
Effect of Heat Treatment on Additively Manufactured Ni-based Superalloys
Failure Evolution and Mechanisms in Additively Manufactured Stainless Steel 316L Under Dynamic Loading Conditions
Grain Orientation Analysis of Additively Manufactured 316L Stainless Steel
Influence of the Surface Condition on the Fatigue Performance of Alloy UNS N07718 Produced via Selective Laser Melting
Investigating the Mechanical, Microstructural, Corrosion and Impact Performances of a New Steel Composition, Produced by Tandem WAAM Mixing of Steel Wires
Mapping Relationships between Process Parameters, Microstructure, and Properties for Wire Feed – DED of Ti-6Al-4V
Mesoscale crystallographic texture control via beam path sequencing in electron beam melting
Metal Powder Recyclability within Binder Jet Additive Manufacturing Process
Microstructural Evolution and Mechanical Properties of Cast and Additive Manufactured AlSi10Mg at Different Heat-treated Conditions
Microstructure Analysis of Laser Additive Manufactured 316L Stainless Steel
Microstructure and Corrosion Characteristics of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion Process
Microstructure and Mechanical Property of Additively Manufactured Zr-modified AA6061 Alloy
Microstructure and Property of Additively Manufactured Nickel-based Superalloy
Multi-objective Optimization of Binder Jetting Process Parameters for the Co-Cr-Mo Alloy
Prediction and validation of successful multi-material AM interfaces
Process and Characterization of 3D-printed Copper
Reparation of Co-based Parts Using Additive Manufacturing Technologies
Sintering and Alloying Kinetics of Particle-Based Ink Extruded Nickel-Based Scaffolds
Structural Characterization of Wire and Arc Additive Manufactured (WAAM) Austenitic Stainless Steel
Toward In-Situ Flaw Detection in Laser Powder Bed Fusion Additive Manufacturing
Understanding The Influence of Porosity and Microstructure On Mechanical Behavior in Additive Manufactured 316L Stainless Steel Using In-situ X-ray Computed Tomography and Electron Microscopy

Questions about ProgramMaster? Contact