ProgramMaster Logo
Conference Tools for MS&T24: Materials Science & Technology
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting MS&T24: Materials Science & Technology
Symposium Additive Manufacturing of Metals: Microstructure, Properties and Alloy Development
Sponsorship
Organizer(s) Prashanth Konda Gokuldoss, Tallinn University of Technology
Jurgen H. Eckert, Erich Schmid Institute of Materials Science
Scope Additive Manufacturing (AM) is one of the emerging fields, which is seen as the manufacturing process for the future. AM continues to attract the attention of professional communities including research, design, and process engineers. However, more research is required to fully understand the capabilities of these processes and the correlation between process conditions, process parameters, microstructure, and other material properties. Another main challenge is alloy development, where it has been realized that alloys specific for additive manufacturing processes should be developed in order to completely utilize the benefits of these additive manufacturing processes. This symposium will focus on materials, alloy development their processing, properties, and microstructure for the different AM processes. In addition, emphasis will be placed on understanding the capabilities of the processes and the correlation between process conditions, process parameters, microstructure, and other material properties. We invite papers on alloy design and materials development, processing of materials, microstructure, and the resultant properties of AM materials. Suitable topics for this symposium include, but are not limited to: - Ferrous alloys including steels - Al-based alloys - Cu-based alloys - Co-based alloys - Mg-based alloys - High entropy alloys - Intermetallics - Metallic glasses - Metal matrix composites (including cermets and ODS alloys), etc.
Abstracts Due 05/15/2024
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

Additive manufacturing of Aluminum Metal Matrix Composite by SMART Processed Powder
Additive Manufacturing of Cermets by Laser Modulation
Additive Manufacturing of Inconel 718 and SS316L Preforms for Forging Operations
Additively Manufactured Carbide and Nitride Reinforced Nb11.2Cr22.2Co22.2Ni22.2Cu22.2 High-entropy Alloy Composites for Multifunctional Application
Alloy Design for Additive Manufacturing of High-Fraction γ′ Ni-Based Superalloys
Anisotropy in Local Microstructure – Does It Affect the Tensile Properties of the SLM Samples?
Challenges in the Heat Treatment of Additively Manufactured Precipitation Hardened Martensitic Stainless Steels
Computational Design of Crack-Free Cu-Inconel Functionally Graded Bimetallic Interfaces for Additive Manufacturing
Computational Studies of Solidification Kinetics in Multicomponent Alloys
Contributing Factors to High-Quality Ni-Mo-Al Single Crystal Repairs by Laser Melting: A Multimodal Approach
Cyclic Deformation Behavior of Wire Arc Additively Manufactured Inconel 625 under Strain-Controlled Low Cycle Fatigue
Designing Novel High Strength Steels by Coupling High Throughput Additive Manufacturing and Machine Learning
Development of Fe-Si Steel Powders for Additive Manufacturing
Effect of High Fe Content on the Microstructure and Mechanical Properties of an Additively Manufactured Al-Si-Cu-Mg Alloy
Effects of Forging Parameters on Microstructural and Mechanical Anisotropy in Wire Arc Additively Manufactured (WAAM) AISI 316LSi.
Enhanced Mechanical Properties in TiC/B4C-CoCrFeMnNi High-Entropy Composites Fabricated by Direct Energy Deposition
Exploring the Microstructural Features of Additively Manufactured Graphene-Reinforced Stainless Steel 316L Composites
Formation and Elimination of Micron-Scale Oxide Inclusions in Ni-20Cr + Y2O3 ODS Alloy Fabricated with Laser Powder Bed Fusion
Grain Refinement and 3D Printability of High Strength Aluminum Alloys via In Situ Alloying of 2024 for LPBF Applications by Mechanical Mixing of Commercially Available Powders
High Throughput Generation of Alloy Microstructure Selection Maps
High Velocity Microparticle Impacts of Heat-Treated Al 6061
Influence of Annealing on Enhancing Soft Magnetic Properties in Laser Powder Bed Fusion Processed Hiperco (Fe-49Co-2V)
Influence of the Arc Current Type on the Chemical Composition and Dilution of the 5356 Aluminum Alloy Deposited by WAAM Additive Manufacturing
Integrated Deposition and Thermal Processing for WAAM Grade 91 Ferritic/Martenstic Steel
Investigating Deviations from NAVSEA LPBF Qual-Cert Requirements on the Microstructure and Mechanical Properties of 316L Stainless Steel Components
Laser Powder Bed Fusion of Highly Dense Tantalum
Laser Processing of Ce-Based Permanent Magnets to Support the Domestic Magnet Supply Chain
Maximizing High-Temperature Mechanical Property Through Optimization of γ’ Microstructure by Heat Treatment of Crack-Free SLM-Fabricated CM247LC Superalloy
Microstructural and Mechanical Properties of Steel Alloys Produced through the Bound-Metal FFF Additive Manufacturing Process
Microstructure and Mechanical Properties Correlation of Additively Manufactured IN939 Superalloy
Microstructure Characterization and Mechanical Performance of Oxide-Dispersion Strengthened Graded Alloy Mixtures Fabricated using Additive Manufacturing
Microstructure, Electrical Conductivity, and Mechanical Properties of an Additively Manufactured Al-Zr-Ce-Cu-Sn Alloy
On the Structural Integrity of Fe-36Ni Invar Alloy Processed by Different Additive Manufacturing Techniques
Powder-Size Driven Facile Microstructure Control in Powder-Fusion Metal Additive Manufacturing Processes
Rapid Experimental Validation of Printable High-Temperature Al-Alloys Using Laser-Scanning Strategies
Recycling of Toasted 431 Stainless Steel Powders in Extreme High Speed Laser Cladding (EHLA) – Characterization of Heat Affected Powders, Deposition Efficiency, and Coating Microstructures
Refractory Metal Mixing in Directed Energy Deposition - Experiments and Analysis
Role of Manganese Composition on the Strain-Controlled Fatigue Life in Additively Manufactured 316L Austenitic Stainless Steel
Superior Strengthening via Nanoscale Lamellae in Eutectic Multi-Principal Element Alloy Additively Manufactured by Laser Powder Bed Fusion
The Importance of Trace Elements Analysis in 3D Printing Materials Physical and Mechanical Properties
The Response of 3D Printed 17-4 PH to Heat Treatment
Validation of Microstructure Prediction for Laser Hot Wire DED Ti6Al4V with Accompanying In-Situ Monitoring


Questions about ProgramMaster? Contact programming@programmaster.org