About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Developments in Advanced Nuclear Structural Materials
|
| Presentation Title |
Long-Term Corrosion and Erosion of AISI 309 Stainless Steel in Flowing Lead–Bismuth Eutectic at 500 °C |
| Author(s) |
Xavier Angus, Osman Anderoglu |
| On-Site Speaker (Planned) |
Xavier Angus |
| Abstract Scope |
Structural pump components fabricated from AISI 309 stainless steel were removed from the DEvelopment of Lead Alloy Technical Applications (DELTA) lead-bismuth eutectic (LBE) loop after approximately fifteen years of operation and examined to characterize long-term degradation under flowing LBE. The specimens experienced prolonged exposure to high-velocity LBE at approximately 500°C under repeated thermal cycling. Computational fluid dynamics (CFD) simulations were performed to estimate local flow velocities and wall shear stresses and were interpreted in conjunction with optical microscopy, scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). Despite the prolonged exposure, no oxide layer or extended depletion zone was observed in the specimens analyzed. Instead, SEM and EDS analyses indicate degradation consistent with erosion-corrosion accompanied by limited general dissolution of Fe, Cr, and Ni. CFD simulations predicted elevated local shear stresses that support the observed degradation behavior. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Nuclear Materials, |