About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Developments in Advanced Nuclear Structural Materials
|
| Presentation Title |
Influence on processing methods on microstructure evolution in AM 316H Stainless Steels |
| Author(s) |
Wei-Ying Chen, Stephen Taller, Jiaxuan Li, Timothy Lach, Park Gyuchul, Sourabh Kadambi, Mattew Swisher, Jia-Hong Ke, Xuan Zhang, Lin Gao, Zhexian Zhang, Shunyu Liu, Rongjie Song, Stephanie Pitts, Yiren Chen |
| On-Site Speaker (Planned) |
Wei-Ying Chen |
| Abstract Scope |
This study examined irradiation effects in laser powder bed fusion produced 316H stainless steel under various heat-treatment conditions—as-built, stress-relieved, solution-annealed, and cold-worked—using ion irradiation with wrought 316H as a comparison. Conditions include combinations of temperatures from 300–675°C, dose rates of 10-5–10-3 dpa/s, and doses up to 15 dpa, with helium co-implantation up to 2500 appm/dpa. Initial dislocation structure strongly influenced early-stage void swelling behavior, while swelling rates at high doses were similar across heat-treatment conditions. Helium promoted or suppressed swelling in annealed and stress-relieved conditions, respectively, with the swelling behavior converging at high appm He/dpa. Ni/Si segregation and Cr/Fe depletion were observed on bubbles, voids and grain boundaries under irradiation at 600°C. Rate theory calculations clarified the effects of dislocation density, temperature, dose, and dose rate on void nucleation and growth, and were used to estimate swelling at higher doses and under neutron irradiation conditions. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Nuclear Materials, Iron and Steel, Additive Manufacturing |