About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Atomization & Powder Metallurgy for Advanced Applications: An MPMD Symposium Honoring Iver Anderson
|
| Presentation Title |
A Modified 14YWT Ferritic Steel via GARS and Warm Cross-Rolling for Advanced Reactor Applications |
| Author(s) |
Kevin Jacob, Zongyang Lyu, Sid Pathak, Jordan Tiarks, Nicolas Argibay, Hyosim Kim, Stuart Maloy, Iver Anderson |
| On-Site Speaker (Planned) |
Kevin Jacob |
| Abstract Scope |
An innovative manufacturing process combining gas-atomized reaction synthesis, vacuum hot pressing, and warm cross-rolling was employed to produce a modified 14YWT ferritic steel with strong promise for high-dose nuclear reactor applications. The modified alloy powder, containing double the Y content and Zr partially substituted for Ti, was synthesized via GARS, consolidated by VHP, and deformation-processed by warm cross-rolling, yielding a homogeneous microstructure with high dislocation density and precipitate fraction. The non-equilibrium nature of rapidly solidified GARS powders, together with deformation-induced defects, promotes formation of metastable Y–Zr–W precipitates and Y–Zr–Ti nano-oxides. Post-deformation aging at 850 °C relieves residual stresses, resulting in a tensile ultimate strength of 800 MPa and a strain-to-failure of 15.7 %. Berkovich nanoindentation at 700 °C yielded a hardness of ~1.2 GPa. Heavy-ion irradiation with 5 MeV Fe2+ ions of the as-rolled condition produced voids, whereas the peak-aged sample exhibited very low void concentration. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Nuclear Materials, Mechanical Properties, Characterization |