Conference Logo ProgramMaster Logo
Conference Tools for 2026 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools

About this Abstract
Meeting 2026 TMS Annual Meeting & Exhibition
Symposium Magnesium Technology 2026
Presentation Title Alloying Effects on Dynamic Recrystallization in Mg-Zn-Ca Magnesium Alloys
Author(s) Tracy D. Berman, Tyler Lindemann, John Allison
On-Site Speaker (Planned) Tracy D. Berman
Abstract Scope Gleeble compression tests and Electron Backscatter Diffraction (EBSD) were used to study how alloying affects microstructure evolution and dynamic recrystallization (DRX) in Mg-Zn-Ca alloys. Five materials (unalloyed Mg, Mg-0.1wt%Ca, Mg-3wt%Zn, Mg-1wt%Zn-0.1wt%Ca, and ZX30: Mg-3wt%Zn-0.1wt%Ca) underwent compression at 200–350ºC and strain rates of 0.1, 0.01, and 0.001 s⁻¹. DRX activation energy was calculated using the Arrhenius equation. Unalloyed Mg exhibited the lowest activation energy, while ZX30 had the highest. EBSD Grain Orientation Spread (GOS) maps showed that ZX30 is more resistant to DRX than unalloyed Mg. The effects of processing conditions on the microstructure and texture evolution of these alloys will be discussed.
Proceedings Inclusion? Planned:
Keywords Magnesium, Other,

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A corrosion resistant and mechanically robust superhydrophobic coating with self-healing characteristics for biodegradable low alloyed Mg-Ag-Zn-Ca
A novel electrolytic process using an Al cathode for producing Mg – Al alloy from MgO
Achieving high fracture toughness in Mg-Y-Zn alloys by controlling microstructural anisotropy and heterogeneity
Additive Manufacturing of AZ31 Magnesium Alloy via powder bed friction stir (PBFS): Microstructural and Mechanical Analysis
Alloying Effects on Dynamic Recrystallization in Mg-Zn-Ca Magnesium Alloys
An approach for characterizing the 3D geometric quantities of twins in Mg-alloys
Application of High-MgO Pellets for Optimizing Slag Desulfurization and Furnace Stability in a 5500 m³ Blast Furnace
Atomic-scale interfacial segregation of creep behaviour of Mg-Ce based alloys
Corrosion evolution of extruded Mg-alloys WE43, Mg10Gd, ZX10 in HBSS: linking residual strength to corrosion morphology
Corrosion Response of As-Cast Mg–Er Alloys: Role of Er-Induced Intermetallics and Segregation
Crystallographic Transformation of Al8Mn5 intermetallic: Insights from Synchrotron X-ray Diffraction and DFT
Development of Mg-based materials through electrical resistivity measurements
Disentangling the Effects of Mechanical Loading and Corrosion on Magnesium Alloy Degradation
Distillation for Recovery of Magnesium Alloy
Domestic decarbonized magnesium from seawater
Effect of Differential Speed Rolling and Post Annealing on the Formability of Mg-Based Alloys
Effect of electricity on creep properties of AZ31 alloy: High through-put creep test
Effect of Fe Content on the Corrosion Rate of Mg-Zn-Ca-Mn Alloy System
Emerging Trend in Magnesium Product & Semi-solid Process Development
Energy efficiency opportunities in the production of magnesium oxide from chloride-leach byproducts
Evaluation of LZ21 for bioabsorbable pediatric vascular applications
Exogenously Controlling Degradation Behavior of Bioabsorbable Mg Utilizing Chelation Therapy
Improving the strength of dual-phase Mg-Li alloys through alloying elements and microstructure control
In-situ neutron diffraction study of the microstructure and deformation behavior in Mg97Y2Zn1 alloys with multimodal microstructure
In-Situ SEM Tensile High-Resolution Electron Back Scatter Diffraction and Digital Image Correlation in Polycrystalline MgY alloys
In situ synchrotron-tomographic and -diffraction investigation of the effect of tensile load on Mg2Y1Zn(Gd, Ag, Ca).
Integrating experiments with the PRISMS simulation framework to investigate the kinetics of static recrystallization in Mg-Zn-Ca alloys
INVESTIGATE THE WEAR BEHAVIOR FOR MAGNESIUM ALLOYS (AS41) and (AS41+C)
Investigating the effect of Silver on the Microstructural, Mechanical and Corrosion behavior of Mg-Zn-Ca-xAg (x=0.5,1.5 and 2.5%) alloy for Orthopedic applications
Investigating the Influence of Zn and Ca on Twinning-Detwinning Behavior During Fatigue in Mg Alloys
Investigation of molten salt electrolysis of ferronickel slag for producing Mg metal
Investigation of the Surface Chemistry of Mg and Mg Alloy Powders
Mechanical Properties of Dissimilar Friction Stir Lap Welds between AZ31b and Al5052 Alloys
Microstructural Evolution and Hydrogen Storage Properties in Hyper-Eutectic Mg-xNi Alloys
Non-flammable magnesium alloys with Y and Ca prepared by extrusion
Processing-Drive Optimization of Mechanical and Corrosion Behavior in Biodegradable Mg-Ca Alloys for Bone Implants
Recent significant upgrade of the thermodynamic database PanMg and application examples
Reusing published Mg texture data for alloy development efforts
Statements, Obstacles, Excuses for Not Using Magnesium and Its Alloys
Surface oxidation governs crystallization kinetics in Mg-Cu-Gd BMGs
Towards light weight structural materials-Optimized processing for high hardness and improved corrosion behavior of Nanocrystalline Mg-Al alloys
Understanding the Role of Alloying on the Deformation and Recrystallization Behavior and Texture Evolution of Mg-(Ca, Zn) Alloys
Understanding the Role of Alloying with Zn and Ca on Deformation Mechanisms during Fatigue in Mg Alloys
When Processing Leads the Way: ML-Powered Optimization of Biodegradable Mg Alloys
Questions about ProgramMaster? Contact programming@programmaster.org | TMS Privacy Policy | Accessibility Statement