3D Metal Printing of Pure Copper Antenna using Ultrafast Pulse Laser |
3D Printed Bioactive Glass-Hydrogel Scaffolds for Craniofacial Bone Defects |
3D Printing of Batteries from Lunar and Martian Regolith |
A Calibration-Free Physics-based Framework to Predict Printability Maps in Additive Manufacturing Process |
A Case Study in Component Redesign for Additive Manufacturing Process Workflows |
A Comparison of Layer Deposition and Open Molding of PETG by Fused Pellet Fabrication in an Additive Manufacturing System |
A Comparison of Thermal History and Porosity Formation for Different Laser Melting Toolpaths |
A Comprehensive Review and Discussion of Knowledge Graph and Ontology for Rapid Qualification of Metal Additive Manufactured Parts |
A Computational Study on Pore Networks in Binder Jet Additively Manufactured Components with Bimodal Powder Distribution |
A Computational Study Summarizing the Effects of Composition on the Melt Pool Geometry in Additive Manufacturing |
A Data-driven Approach for Multi-Topology Lattice Transitions |
A Data-driven Reverse Shape Compensation Method to Reduce Large Deformation in Binder Jet Parts |
A Data-driven Reverse Shape Compensation Method to Reduce Large Deformation in Binder Jet Parts |
A Dislocation Mechanism Based Constitutive Model for Hierarchical Anisotropic Materials |
A Finite Element Modelling of Densification and Distortion Behaviour of Laser Powder Bed Fusion Processed Inconel 718 Product |
A Framework for Digital Materials Fabrication Using Directed Energy Deposition Process |
A Framework for Interactive Structural Design for AM |
A framework with examples for printing thermosetting polymers using laser powder bed fusion additive manufacturing |
A Hierarchical V-Network Framework for Part Qualification in Metal Additive Manufacturing |
A Limited-scale Experimental Investigation of the Unit Cell Topology Effects of Interpenetrating Compound Cellular Structure Designs |
A Literature Review of the Application of M300 Maraging Steel for Laser Powder Bed Fusion |
A Low Cost, Flexible Sensor Architecture for Process Monitoring in Metal Casting with 3D Printed Sand Molds |
A Model for Driving Signal Effects on Piezoelectric Inkjet Printing Speed |
A Multiphysics Computational Framework for Interfacial Fluid - Particle Interaction in Binder Jet 3D Printing |
A Multiphysics Modeling Approach to Assess the Powder Bed Characteristics of High Strength Steel in Selective Laser Melting |
A Novel Test Artifact Design for Conformal Printing via Material Extrusion |
A Preliminary Study of Composite-Based Additive Manufacturing (CBAM) Material Properties |
A Preliminary Study of Microstructural Evolution Modeling for Liquid Metal Droplet Jetting |
A Process - Structure - Property - Performance Study of
Liquid Metal Jetted Parts |
A Process Optimization Framework for Direct Energy Deposition: Densification, Microstructure, and Mechanical Properties of an Iron-chromium Alloy |
A Review of Extrudate Shaping For
Large-Scale Additive Manufacturing |
A Review on Machine Learning Interpretation for Additive Manufacturing |
A Study of the Electrical Resistivity of Sintered Copper Nanoparticles |
A Study on the Effect of VED, Particle Size Distribution, Moisture Content, and Powder Reuse on the Densification and Mechanical Properties of L-PBFed Nickel Alloy 718 Using Design of Experiment and ANOVA |
A UNIFIED SYSTEM CONTROLLER FOR OPEN-SOURCE POWDER BED FUSION SYSTEMS |
Accelerated Material Adoption in Laser Powder Bed Fusion |
Active Control of Selective Laser Flash Sintering of Ceramics |
Additive Manufacturing Development of an Aerospike Breadboard Engine |
Additive Manufacturing of Compliant Mechanisms for Deployable Space Structures |
Additive Manufacturing of Embedded Sensors with Laser Foil Printing Method |
Additive Manufacturing of Fiber-Reinforced Polymer Composites: A Technical Review and Status of Design Methodologies |
Additive Manufacturing of Graphite Structures
|
Additive Manufacturing of LiNi1/3Mn1/3Co1/3O2 battery electrode material via vat photopolymerization precursor approach |
Additive Manufacturing of Mixed Potential Sensors for Natural Gas Emissions Monitoring |
Additive Manufacturing of Zirconium Carbide by Ceramic On-Demand Extrusion |
Additive Manufacturing Process State Inference with Convolutional LSTM |
Additively Manufactured 316L Stainless Steel: Effect of Heat Treatment on Microstructure and Tensile Properties |
Additively Manufactured Conformal Fluidic Circuits as Non-destructive Pressure - Strain Transducers |
Additively Manufactured Mesoscale Composites |
Advanced Robotic Gantry Directed Energy Deposition (DED) System for Large Format Structures with Multi-Process Capabilities |
Advances in the Modeling of Additive Manufacturing Process Simulation |
Aerosol Jet Printing of Carbon Nanotubes for Electronic Interconnects |
Aging Behavior of UV Curable PDMS Developed for Large-scale, High Viscosity Stereolithography |
AI-powered Augmented Reality Training for Metal Additive Manufacturing |
Alternative Stainless Tool Steels for Additive Manufacturing |
An Efficient Surrogate-based Model Optimisation to Predict the Morphology of Inkjet-printed Dielectric Tracks |
An Experimental Apparatus for High-speed Imaging and Analysis of Powder Primitive Formation in Binder Jet 3D Printing |
An Experimental Study of
Cellular Mechanical Interface in a Bi-material Structure Fabricated by Material Extrusion Additive Manufacturing
|
An Investigation of Laser Powder Bed Fusion Process-Structure Relationship of the High Temperature Thermoelectric Material Silicon Germanium |
An Overview of Key Results in Wire-based DED in the WAAMMat Programme |
An Ultrasonic Technique to Determine the Onset of Select Laser Flash Sintering |
Analysis of Fiber Attrition and Mechanical Performance in Large-Format Additive Manufacturing of Long-Fiber Reinforced Polymer Composites |
Anticipating Build Risk of Complex Geometries Using Commercial Additive Manufacturing Simulation Tools |
Application of Field-driven CAD System for Design for Additive Manufacturing |
Application of Systems Engineering to Lattice Structure Design: A Framework for Requirements Flow Down |
As-built Mechanical Property Estimation and Control of Laser Powder Bed Fusion SS-316L Parts |
Assessing Aerosol-jet Printed Gold Inks for Printed Electronics Applications |
Assessing the Feasibility of Process Window Estimation for L-PBF Ti-6Al-4V through Hardness Measurements |
Assessment of In-situ Defect Mitigation Strategies in Metal Laser Powder Bed Fusion Additive Manufacturing |
Automated Path Planning for Wire Feeding in Large Format Polymer Additive Manufacturing |
Autonomous Error Detection and Correction Powered by Deep Neural Networks |
Autonomous Manufacturing of Aerial Vehicles via Robotic Additive Manufacturing and Embedding |
AutoPrint: An Affordable and Automated Fused Filament Fabrication Based Additive Manufacturing System |
Beam Deletion in Square Honeycombs for Improved Energy Absorption Under Quasi-Static In-Plane Compression |
Binder Jetting of 316L Process Simulation Tools Evaluation |
Binder Jetting of Aluminum 6061 and Ti64: Highlights in Reactive Metal Sintering and Distortion Control using LiveSinter |
Binder Jetting of Tungsten Carbide with Low Metallic Binder Contents: Challenges and Solutions |
Biopolymer Composites with Dairy Protein for Use in Additive Manufacturing |
Boosting Artificial Intelligence in Design Processes by the Use of Additive Manufacturing |
Build Plate Design for Extrusion-Based Additive Manufacturing |
Cad-To-Scan Planning For Hybrid Manufacturing |
Calibration of the Johnson-Cook Material Model for Additively Manufactured 304LSS Parts: Modeling and Experiments |
CalPhaD Method Contribution to Optimize Heat Treatments
on a Ti-6Al-4V Additive Manufactured Alloy |
Carbon Design Engine: Powerful Lattice Design Software for Precisely Tuned, High-Performance Products |
Carbon Fiber Suspension Dynamics Analysis via Coupled CFD - DEM Simulations for Additive Manufacturing Polymer Melt Flows |
Cellular Fluidics: Tuning Multiphase Interfaces in 3D Using Architected Porous Media |
Cellular Subgrain Features in Directed Energy Deposited Stainless Steel 316L: The Influence of Morphology on Mechanical Properties |
Ceramic On-Demand Extrusion of ZrB2-SiC Microchannels for Ultra High-Temperature Compact Heat Exchanger |
Characterization and Validation Experiments for a Binder Jet 3D Printing Modeling Framework |
Characterization of Defects within AM Fabricated Metal Components |
Characterization of Material Jetting Processes to Develop Design Guidelines in Support of Model Based Definition for Additive Manufacturing |
Characterization of Microscopic Deformation of Materials Using Deep Learning Methods |
Characterization of the Fatigue Strength of Additively Manufactured Ti-6Al-4V Specimens with Residual Stress and Recoater Blade Interference Flaws
|
Characterization Techniques for Quantifying Effect of Interlayer Surface Peening on AlSi10Mg |
Characterizing Hydrodynamic Shear Stress and Cell Viability of Algal Cells during Extrusion Bioprinting |
Characterizing The Thermal-Induced Distortion of Large-scale Polymer Composite Printed Structures |
Clamping Concept for 6-side Hybrid Manufacturing |
Closed-loop Recycling of PETG in Fused Granule Fabrication Additive Manufacturing Processes |
Closed Loop Control Utilizing in Situ Pattern Printing and Reading for Quality Level Determination in Additive Manufacturing |
Coalescence behavior of polyamide 12 as function of zero-shear viscosity and influence on mechanical performance |
Combination of Cladding Processes with Subsequent Hot Forming as a New Approach for the Production of Hybrid Components |
Compaction-assisted Binder Jetting of Textured Ceramics |
Comparative Life Cycle Environmental Assessment of aluminium, titanium and steel components manufactured by Wire Arc Additive Manufacturing |
Comparative Study of Additively Manufactured Inconel 625 in the As-built and Heat-treated Condition |
Comparative study of Mechanical Properties of Aluminum Alloy A356 (Al-12Si) Fabricated by Directed Energy Deposition Method and Pressure Die Casting |
Comparing Additive Approaches: Manufacturing a Wind Turbine Structural Component |
Comparison of Multiple Heat Treatments by Observing Mechanical Properties and Microstructure of LPBF Fabricated Aluminum F357 |
Comparison of Nanopowder and Granulated Powder in Compaction-assisted Binder Jetting |
Comparison of Tensile Properties and Microstructure of Laser-Powder Bed Fusion 17-4PH Stainless Steel |
Computational Fluid Dynamics Data-driven Heat Source Model for Finite Element Process Simulation in Laser Powder Bed Fusion Additive Manufacturing |
Computational Fluid Dynamics Data-driven Heat Source Model for Finite Element Process Simulation in Laser Powder Bed Fusion Additive Manufacturing |
Computational Modeling and Experimental Validation of Primitive Formation in Binder Jet 3D Printing |
Computational Modeling and Experimental Validation of Primitive Formation in Binder Jet 3D Printing |
Concrete Additive Manufacturing and Its Use in Energy Storage |
Conformal Additive Manufacturing on A Curved Substrate Using Isothermal Surface Slicing |
Construction of Open-Source Laboratory-Scale Binder Jetting System for High-Speed Synchrotron X-Ray Imaging |
Continuous Sculpting as a Novel Method to Reduce the Staircase Effect in Solidfreeform Fabrication Processes that are Dependent on Phase Transformation |
Controlling Grain Evolution of IN625 Parts Produced by LPBF-AM |
Controlling Process Instability for Defect Lean Metal Additive Manufacturing |
Convolution Long-short Term Memory Autoencoders Applied to Process Monitoring Across Multiple Camera Types for Laser Hot Wire Additive Manufacturing |
Convolutional Autoencoder for Image Denoising AM Process Monitoring |
Cooling Rate Measurement in Directed Energy Deposition using Photodiode-based Thermometry |
Copper Tape Manipulation for Additive Manufacturing |
Creating Large-scale Metal Parts with Multi-arm High Deposition Wire-arc System |
Data-driven Surrogate Model for Laser Powder Bed Fusion Part - Process Design |
Decoupling Control of Processing Conditions for Hybrid Manufacturing Systems with ROS |
Defect-sensitive Fatigue Modeling for L-PBF Parts in Very High Cycle Regime
|
Defects Classification via Hierarchical Graph Convolutional Network in L-PBF Additive Manufacturing |
Design and Additive Manufacturing of Bio-inspired Copper Heat Sinks for Microelectronics Cooling |
Design and Analysis of a Topology Optimized Transtibial Prosthetic Socket Using Combined Static Gait Analysis |
Design and Fabrication of Cost-Effective, Light-Weight Bipolar Plate for PEM Fuel Cells using FDM Process |
Design for Additive Manufacturing – from Pure Complexity to Multi-functionality |
Design of an In-situ Microscope for Selective Laser Sintering |
Design of Intrinsically Balling-Resistant Alloys: A Physics-informed and Data-enabled Approach |
Design Strategies for Stochastic Strut-based Lattices |
Designing an Industrially Implementable Framework to Design Additive Recycling Invariant Powder LPBF Feedstocks via Alloy 718 |
Designing Calibration-Free Physics-Based Printability Maps for Additively Manufactured Cantor Alloys |
Design, Fabrication, and Validation of a Laboratory-scale Binder Jet Additive Manufacturing Testbed |
Detecting Layerwise Build Defects Using Low-Cost Imaging and Machine Learning |
Developing a Roadmap to Manufacture Feedstocks for Selective Laser Sintering |
Developing a Universal Additive Manufacturing Parameter Transference Model |
Development of a Hybrid Carbon Fiber Composites Additive Manufacturing Machine |
Development of Composite-like Parts using SLM |
Development of Laser Cladding Procedure through Experiment and Analysis Using Powder-blown Directed-energy Deposition |
Development of Processing Parameters for the Selective Laser Sintering of Carbon Fiber Reinforced Polyphenylene Sulfide with a Tooling Application |
Development of Standards Education Modules for Robotics and Additive Manufacturing |
DIGITAL MICROFLUIDIC DESIGN FOR INJECTION CONTINUOUS LIQUID INTERFACE PRODUCTION (iCLIP) OF 3D OBJECTS |
Digital Twin Research and Development for an Additive Manufacturing Cell |
Digitally Twinned Additive Manufacturing: Real-time Detection of Flaws in Laser Powder Bed Fusion by Combining Thermal Simulations with In-Situ Meltpool Sensor Data |
Direct-Writing SiC with Micro-Cold Spray: Effect of Particle Impact Velocity on Film Morphology |
Direct Observation of Pore Formation Mechanisms During LPBF Additive Manufacturing Process |
Direct Write of Zinc Oxide Films by Micro Cold Spray |
Direct Writing of Thick, Patterned Films of Ag by Micro Cold Spray |
Directed Energy Deposition Processing-Performance Relationship of AF9628 |
Discontinuity-free Additive Manufacturing Strategy for Axisymmetric Components |
Droplet on Demand Printing of Al-6061 and Pure Aluminum |
Effect of Additive and Subtractive Sequence on Distortion During Hybrid Directed Energy Deposition |
Effect of Build Orientation on Residual Stress and Microstructure in Inconel 625 Fabricated via Laser Powder Bed Fusion |
Effect of defects on the mechanical properties of laser powder bed fused Ti-6Al-4V |
Effect of Laser Polishing on Fatigue Behavior of Additively Manufactured IN718 |
Effect of Powder Characteristics on Fatigue Performance of Additively Manufactured 17-4 PH Stainless Steel |
Effect of Powder Reuse on Microstructural and Fatigue Properties of Ti-6Al-4V Fabricated via Directed Energy Deposition |
Effect of Printing Orientation on Ceramic Binder Jetting Additive Manufacturing |
Effect of Process Parameters on Voids within Short Carbon Fiber/ABS Beads Produced via Large Area Additive Manufacturing |
Effect of Scanning Strategies on Defects Generated by Lack of Fusion during Laser Power Bed Fusion: A Part-Scale Finite Element Simulation Study |
Effect of Surface Preparation on LPBF 17-4PH Mechanical Properties |
Effect of Thermal Aging in the Fatigue Life of Hot Isostatic Pressed AlSi10Mg Alloy fabricated from Laser Powder Bed Fusion |
Effect of thermal post-processing on microstructure and tensile behavior of additively manufactured aluminum alloys (AlSi10Mg and Scalmalloy) via L-PBF: A comparative study |
Effects Due to Variations in Thermal Properties of Maraging Steel for Finite Element Modeling of the WAAM Process |
Effects of Chemical Treatment of Additively Manufactured Tooling on Surface Quality in Investment Casting |
Effects of Fast Neutron Irradiation on the Microhardness of Inconel 625 and Inconel 718 Materials Fabricated via Laser Powder Bed Fusion |
Effects of HIP on the Quasi-static and High Cycle Fatigue Behavior of Thin-Walled Inconel 718 by Laser Bed Powder Fusion |
Effects of Pores and Stress State on Fracture of Additively Manufactured Metals |
Effects of Process Interruption During Laser Powder Bed Fusion on Microstructural and Mechanical Properties of Fabricated Parts |
Effects of Recoating Velocity and Layer Thickness on the Powder-bed Surface Roughness in the Laser Powder Bed Fusion (LPBF) Process |
Effects of Spherical Fillers on the Processability and Mechanical Properties of PA613 and PP-based LS Dry Blends |
Effects of UV Overcuring in Multi-Material Jetting Additive Manufacturing |
Electrodeposition of Metals onto 3D-Printed Lattices |
Electrostatic Powder Spreading (ESPS) as a Method to Build Multi-Material Powder Bed Fusion Parts |
Embedded Sensors to Experimental Evaluate Binder Curing in 3D Printed Sand Molds for Metal Casting |
Embedding Information in Additively Manufactured Metals via Magnetic Property Grading for Traceability and Counterfeiting Prevention |
Enabling Part-Scale Scanwise Process Simulation of Laser Powder Bed Fusion by Combining Matrix-free Finite Element Modeling, Adaptive Remeshing, and GPU Computing |
Enhancement of Gas-Atomized 304L Stainless Steel Powder by Plasma Spheroidization for use in the Laser Powder Bed Fusion (LPBF) Process |
Establishing a Machine-Agnostic Energy Density Model for Laser, Powder-blown Directed Energy Deposition |
Evaluating Concepts for the Integration of Milled Components into the Additive Manufacturing Process |
Evaluating the Mechanical Properties within the Transition Region of Multi-Material Large-Format Extrusion Additive Manufacturing
|
Evaluation of Direct Ink-write Additive Manufacturing |
Evaluation of Functionally Graded Lattice Properties of Laser Powder Bed Fused Stainless Steel 316l |
EVALUATION OF SOLIDIFICATION IN POWDER BED FUSION USING A HIGH SPEED CAMERA |
Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion |
Examining Repeatability in Polymer Material Extrusion Additive Manufacturing Systems |
Examining Repeatability in Powder Bed Fusion Additive Manufacturing Systems |
Examining the GPU Acceleration Speed-up for Finite Element Modeling of Additive Manufacturing |
Expanding Laser Powder Bed Fusion Processing Space Using Alternative Scan Strategies |
Experimental Analysis and Optimization of Gas Flow in an Open-Architecture Metal L-PBF System |
Experimental Analysis of Functionally Graded Materials produced by Fused Filament Fabrication |
Experimental and Numerical Analysis of Lattice Structures with Different Heterogeneities |
Experimental Study for Improved Productivity of Laser-Foil-Printing Additive Manufacturing |
Experimental Study of Wing Structure Geometry to Mitigate Process-Induced Deformation |
Experimental Study on the Electropolishing of Additive Manufactured Copper Parts |
Exploration and Evaluation of Offset Equation-Based Lattices |
Fabricating Functionally Gradient Material with Hybrid Manufacturing: Directed Energy Deposition & Machining |
Fabrication of Biomimetic Functional Materials and Structures via Multiscale Nanocomposite Printing |
Fabrication of Liquid-Filled Voronoi Foams For Impact Absorption Using Material Jetting Technology |
Fabrication of Refractory Alloys using Electron Beam Powder Bed Fusion |
Factorial design data analytics for material parameters in multi-physics modeling of additive manufacturing |
Fatigue Analysis of Short Carbon Fiber Reinforced Composite Components Manufactured using Fiber-Reinforced Additive Manufacturing |
Feasibility Study of Large-sized Aluminum Facades by Using Wire Arc Additive Manufacturing |
Feedback Control Development for Glass Additive Manufacturing |
Feedforward Control of Laser Powder Bed Fusion Process |
FFF Printing of Semi-crystalline PET: Exploring the Effects of Layer Specific Area and Build Rate on Crystallinity and Mechanical Properties |
Finite Element Modeling of Material Deposition for 5-axis Additive Manufacturing |
Four-Axis Coordinated Motion for Glass Additive Manufacturing |
From Porous to Solid and Back: Densification of Binder Jet 3D Printed Materials |
Functional Polyurethane Composites via Reactive Binder Jetting (RBJ) of a Dual-ink Binding System |
Fundamental physics effects of background gas species and pressure on vapor plume structure and spatter entrainment in laser melting |
Fused Filament Fabrication of a Multi-material Metamaterial for Tailored Compliance |
Fused Filament Fabrication of highly Dense Copper Parts |
Generation and Analysis of AlSi10Mg L-PBF Single Track Data Set Enabling Deeper Process Insights. |
Generative Design and Additive Manufacturing of Three-dimensional Architected Metamaterials |
Generative Design for Additive Manufacturing of Satellite Optical Tracker Mount |
Geometric Challenges in Designing Parts for Machining using Wire-fed DED |
GPU-accelerated WAAM Process Simulation using an Improved Modeling Workflow |
Graph Neural Networks for 3D Defect Mapping in Laser Powder Bed Fusion |
HDF5 Hierarchies for AM Digital Representations |
Heat Treatment Effects on Mechanical Properties of Electron Beam Additive Manufactured Ti-6Al-4V |
Heat Treatment Effects on Mechanical Properties of Wire Arc Additive Manufactured Ti-6Al-4V |
High-power Microwave Irradiation for Localized Curing of Opaque Polymer Composites |
High-Resolution Reactive Extrusion Additive Manufacturing |
High Deposition Rate Wire Arc Additive Manufacturing |
High Fidelity Additive Manufacturing of PMDA-ODA Polyimide via Supramolecular Salts |
Holistic Development of the Electron Beam Melting Process for Ni-base Superalloys: Feedstock, Process Optimization, Data Analytics, to Component Evaluation |
Hot Isostatic Pressing to Increase Isotropic Behavior of Wire DED Ti6Al4V |
Hybrid Additive and Subtractive Manufacturing of Direct-Heated Tooling |
Hybrid Curve Fitting For Reducing Motion Commands In Object Construction |
Hybrid DED Process Parameter Development and Translation across Spot Size |
Hybrid Laser Powder Bed Fusion Additive Manufacturing: Application to Microwave Radio Frequency Quarter Wave Cavity Resonators |
Immersed Electrohydrodynamic Direct Writing: Fabrication of Nanofiber-reinforced Composites with Spatially Controlled Distribution |
Impact of Composition and Solidification Pathway on Additively Manufactured 316L Printed via a Laser-wire Directed Energy Deposition Process |
Impact of Moisture Absorption on 3D Printing Nylon Filament |
Impact of Nozzle Condition on Powder Catchment Efficiency for Coaxial Powder Direct Energy Deposition |
Impact of Zirconia Slurry Doping on 316L Stainless Steel prepared by Laser Powder Bed Fusion for biological/high corrosion applications |
Impacts of Sharpened Corner Path Geometry on Layer Topology in Wire Arc Additive Manufacturing |
Impingement and Solidification Morphology of Liquid Metal Droplets in Additive Manufacturing via Magnetohydrodynamic Liquid Metal Jetting |
Improved Interfacial Bonding of Multimaterial-fused Filament Fabrication Parts |
Improving the Copper Powder through Plasma Spheroidization for use in the Additive Manufacturing |
In- and Ex-situ Optical Signal Correlation in LPBF |
In-process Multi-physical Melt Pool Characteristics Sensing and Data Correlation in Laser Powder Bed Fusion |
In-Process Quality Monitoring of Biological Additive Manufacturing Using Machine Learning |
In-Situ Infrared Thermographic Measurement of Powder Properties in Laser Powder Bed Fusion |
In-situ Integration of Weldable Strain Gauges in Components Manufactured by Laser-based Powder Bed Fusion |
In-situ Interferometry for Vat Photopolymerization Additive Manufacturing |
In-situ Measurement of Melt Pool Emissions via Coaxial Spectrometry in Powder-blown Directed-energy Deposition |
In-situ Microwave Tomography for Temperature Monitoring during Powder Bed Fusion of Polymers |
In-situ Modification of a High Entropy Alloy With 2.4% Molybdenum Using LPBF, and its Effect on Microstructure and Corrosion Resistance |
In-situ Monitoring and Prediction of Porosity in Laser Powder Bed Fusion using Physics-informed Meltpool Signature and Machine Learning |
In-situ Monitoring and Prediction of Porosity in Laser Powder Bed Fusion using Physics-informed Meltpool Signature and Machine Learning |
In-situ Monitoring of Laser Powder Bed Fusion using IR and NIR Emissions to Detect Thermal Anomalies |
In-Situ Monitoring of Wire Arc Additive Manufacturing for Defect Prediction |
In Situ High-speed X-ray Imaging of the Alloying Process via Laser-based Directed Energy Deposition with Dissimilar Powders |
Incorporating Physical Property Measurements in DEM for Modeling AM Powders |
Increasing Part Strength and Density in Binder Jetting with Lattice Infill Patterning |
Induction Initiated Curing of Additively Manufactured Thermoset Composites |
Influence of Annealing on Microstructure and Mechanical Properties of Additively Manufactured 316L |
Influence of Binder-powder Interaction on Accuracy and Resolution of Binder Jetting Parts |
Influence of Biodegradable Additives on the Surface Finish of Additively Manufactured Part: a Green Surface Manufacturing Approach |
Influence of layer thickness and nozzle temperature on the interlocking adhesion strength of additive manufactured multi-material interface |
Influence of Powder Properties and Process Parameters on the High Temperature PBF-LB/M Manufacturability of Filigree Tungsten Components |
Influence of the Different Matrix Materials on the Thermal Properties of Short Carbon Fiber Reinforced Composites Manufactured by Fused Filament Fabrication |
Infrastructure Scale Additive Manufacturing: Contemporary Concepts and Challenges in Concrete 3D Printing |
INSERTING COMPONENTS INTO GEOMETRIES CONSTRUCTED ONTO A NON-STANDARD SUBSTRATE FOR ELECTRONICS PACKAGING |
Insight into Compressive Behaviour of Schwarz-P Lattices Fabricated by Material Extrusion |
Insights into the Droplets' Behaviour to Control the Quality Of 3D Parts: MetalJet |
Intelligent Process Planning and Control of an Aerosol Jet Printing Process |
Intelligent Scan Sequence Optimization for PBF Additive Manufacturing of Complex Geometries |
Interlayer Mechanical Properties of Thermoset Components Produced by Material Extrusion Additive Manufacturing |
Invention and Development of Contour Crafting, Selective Inhibition Sintering, and Selective Separation Shaping |
Investigate the height dependency of the micro-/defect-structure and mechanical properties of additively manufactured AlF357 aluminum alloy |
Investigating the Directed Energy Deposition Additive Manufacturing of Thermoplastic Composites |
Investigating the effect of defects on the crack initiation of additively manufactured IN718 using crystal plasticity simulations |
Investigating the Influence of Thermal and Mechanical Properties of Resin on the Sedimentation Rate of Components Produced by Volumetric Additive Manufacturing |
Investigating the Relationship Between In-Process Quality Metrics and Mechanical Response in the L-PBF Process |
Investigation into Effect of Beam Defocusing in Low Temperature Laser Sintering of PEEK |
Investigation of Mechanical Properties of Structures fabricated by Continuous Volumetric Photopolymerization based 3D Printing |
Investigation of the Process Parameters and Geometry Dependent Shrinkage Behavior of Raster Lines in the Fused Deposition Modeling Process |
Investigation of Wear Behavior of Centrifugal Disc Finishing on Additively Manufactured Ti6Al4V Samples |
Investigation on corner precision at different corner angles in material extrusion additive manufacturing: An experimental and computational fluid dynamics analysis |
Investigations for the Optimization of Metal Freeforming using the ARBURG freeformer |
Key Process Variable Drifts and their Impact on Defect Structure and Tensile Behavior of L-PBF Ti-6Al-4V |
Key Variables in Toolpath Generation for Wire-Arc Additive Manufacturing |
Key Wavelength Selection for Optical Emission Spectroscopy Metrology of Direct Metal Laser Sintering |
Knowledge Base Development for Mechanical Properties and Energy Consumption of Iron-PLA Composite Filaments in Additive Manufacturing |
Large-scale Hybrid Manufacturing of Freeform Metal Components |
Large-volume, High-viscosity Masked Stereolithography |
Laser-material Interactions in LPBF, Visualised through Simultaneous X-ray and Schlieren High-speed Imaging |
Laser Additive Manufacturing of Thermoelectric Bismuth Telluride (Bi2Te3), Earth-Abundant Copper Sulfide (Cu2S) and Silver Selenide (Ag2Se) |
Laser Calibration for Powder Bed Fusion Additive Manufacturing Process |
Laser Line Profile Scanning for Powder Bed Topography Measurement |
Laser Powder Bed Fusion Additive Manufacturing of Zirconium Carbide |
Laser Powder Bed Fusion of Defect-Free NiTi Shape Memory Alloy Parts with Superior Mechanical Response |
Laser Powder Bed Fusion of Highly-Reinforced Aluminum Matrix Composites |
Layerwise Modification of Material Chemistry via UV and Reactive Gas Exposure during Fused Filament Fabrication Additive Manufacturing |
Layerwise Thermal Process Simulation for Laser Powder Bed Fusion: Calibration and Validation with Infrared Camera |
Lightweight Additively Manufactured Bell Crank |
Lightweight, Electrically Conductive, and Thermally Insulating porous ceramics through Stereolithography 3D Printing |
Liquid Metal Droplet Jetting of 4008 Aluminum Alloy |
Load Alignment Ratio – A Novel Lattice Evaluation and Optimization Metric |
Localized Curing of Thermoset Composites via Microwave Irradiation |
Logistic regression classification to predict regional anomalies in nominally printed volume of separate test pieces |
Machine Learning-assisted Additive Manufactured Sandwich Structure Design |
Machine Learning-Assisted Prediction of Thermophysical Properties of Nickel-Base Alloys over a Temperature Range |
MACHINE LEARNING IN ADDITIVE MANUFACTURING: A REVIEW OF LEARNING TECHNIQUES AND TASKS |
Manufacturability Thresholds for Powder Bed Fusion of Ti-6Al-4V Lattices: A Study of Defects and Dimensional Accuracy |
Material-independent Flowrate Control in Extrusion-based Additive Manufacturing |
Material Jetting Developing Platforms for R&D |
Material Modelling of the Photopolymers for Additive Manufacturing Processes |
Material Selection & Design for Lattice-based Biodegradable Metal Implants for Bone Regeneration in Load-Bearing Bone Defects |
Maxel Framework for Representing and Process Planning of Functionally Graded Materials |
Mechanical Evaluation of Topology- and Toolpath-Optimized Composite Structures Manufactured via Multi-Axis Material Extrusion |
Mechanical Properties Characterization for Polyamide Matrix Dairy Protein Composites Fabricated Using Selective Laser Sintering Process |
Mechanisms of Pore Elimination During 3D Printing of Metals |
Mechanized Spreading of Ceramic Powder Layers for Additive Manufacturing Characterized by Transmission X-ray Imaging |
Melt Pool Feature Extraction, Spatial Registration and Layer-to-Layer Control in Powder Bed Fusion |
Melt Pool Size Control in LENS Direct Metal Deposition |
Metal Additive Manufacturing for Advanced Materials by Laser Foil Printing |
Microstructural Characterization of Laser Powder Bed Fusion (L-PBF) Additively Manufactured Inconel 718 for Aerospace Application |
Microstructure and mechanical properties of additively manufactured Haynes 230: a comparative study of L-PBF vs. LP-DED |
Microstructure and mechanical properties of additively manufactured Inconel 718: A comparative study between L-PBF and LP-DED |
Mitigating Thermal Distortion in Wire Arc Additive Manufacturing thru Integrating Topology Optimization and Modified Inherent Strain Modeling |
Modeling of IN718 precipitates' growth
in powder-bed fusion (in-situ and post-build
aging) |
Modelling Fiber Orientation during Additive Manufacturing Compression Molding Processes |
Modelling of Microstructure Evolution in Wire-Based Laser Direct Energy Deposition with Ti-6Al-4V |
Modified Inherent Strain Method |
Monitoring and Flaw Detection during Wire-based Directed Energy Deposition using In-situ Acoustic Sensing and Wavelet Graph Signal Analysis |
Monitoring and Flaw Detection during Wire-based Directed Energy Deposition using In-situ Acoustic Sensing and Wavelet Graph Signal Analysis |
Multi-Phenomena Data Fusion for Enhanced Process Monitoring in Laser Powder Bed Fusion (LPBF) |
Multi-scale Shape Agnostic Flaw Detection and Monitoring in Laser Powder Bed Fusion using Heterogeneous In-process Sensor Data |
Multi-Stage Additive Manufacturing Process for Multi-Scale Porous Structures |
Multifunctional Design in Additive Manufacturing: Process Intensification for Enhanced CO2 Capture |
NEW POSTER: Texture Control in LBPF Haynes 282 for Maximizing Creep Performance |
NEW POSTER: The Third Eye: A Modified Schlieren System for In-Situ Voxel Growth Observation in Projection Based Stereolithography 3D Printing |
NEW SPEAKER: Laser Powder Bed Fusion Additive Manufacturing of Wicking Structures for Heat Pipes: Design, Fabrication, and Application |
NEW TIME (was 10:10 am) Effect of Z-Pin Geometric Parameters on Mechanical Properties of Z-Pinned Additively Manufacturing Composites |
NEW TIME (was 10:25 am) Bioinspired Smart Nanocomposite Fabrication via Liquid Crystal Templating-assisted 3D Printing |
NEW TIME (was 10:25 am) Nondestructive Ultrasound Evaluation of Additively Manufactured Wear Coatings |
NEW TIME (was 10:45 am) Spatial Variations in Horizontal and Vertical Composition Grading using Laser Powder Bed Fusion |
NEW TIME (was 11:30 am) Swarm Manufacturing of a Robotic Vehicle |
NEW TIME (was 1:30 pm) A Data-driven Model for Reconstructing 3D Melt Pool Geometries in Additive Manufacturing |
NEW TIME (was 1:30 pm) Digital Image Correlation of Architected Materials: Challenges, Lessons Learned and Opportunities |
NEW TIME (was 2:10 pm) High-fidelity Modeling of Multi-material Additive Manufacturing: From Micro-/Nano-particle Reinforced Composites to In-situ Alloying |
NEW TIME (was 2:30 pm) Data-driven Approach for Printability Evaluation for Additively Manufactured Metal Alloys |
NEW TIME (was 2:50 pm) Evaluating the Effects of Geometry and Process Parameters in L-PBF using a High-Throughput CT Scanning Approach Within a Connected Machine, Monitoring, Geometry Data Framework |
NEW TIME (was 3:40 pm) Investigating the Effects of Infiltration Conditions on the Microstructure and Mechanical Properties of Binder Jet Fabricated Stainless Steel/Bronze through Ultrasonic Testing |
NEW TIME (was 4:40 pm) Layerwise Thermal Process Simulation for Laser Powder Bed Fusion: Calibration and Validation with Infrared Camera |
NEW TIME (was 8:15 am) From Neutron Diffraction to Tool Repair: How Fundamental Scientific Research Translates to Industrial Impact for Hybrid AM Processes |
NEW TIME (was 8:20 am) Intelligent Scan Sequence Generation for Reduced Hot Spots, Residual Stress and Distortion in Multi-laser PBF |
NEW TIME: 3D Printing of Nanoporous Metals via Fused Filament Fabrication: Rheological Considerations |
NEW TIME: Fundamental Study of Aerosol JetŪ Printing by Means of Phase Doppler Anemometry |
Nondestructive Evaluation of Porosity in Binder Jet SS316L Components using Ultrasound and X-ray Computed Tomography |
Numerical and Experimental Characterization of the Dynamic Properties of As-built 316L Components Produced via Laser Powder Bed Fusion |
Numerical Transient Thermal Development of Melting a Solid Filament in the Hot-end in Material Extrusion Additive Manufacturing |
Observations of Binder Jetting Defect Formation Using High-Speed Synchrotron X-Ray Imaging |
Opacity Modulation in Additive Manufacturing |
Operando Imaging of Directed Energy Deposition Additive Manufacturing |
Optimal Truss-Type Supports for Minimal Part Deformation in LPBF |
Optimization of Laser Process Parameters using Machine Learning Algorithms and Performance Comparison |
Optimization of Penetration Depth and Powder Layer Thickness for Proper Interlayer Adhesion in Polymer Laser Sintering |
Optimization of Print Parameters for Ti-5553 Skinned Lattice |
Optimization of SLA Photopolymers’ Thermal Expansion for Nickel Plating |
Optimization of Vat Photopolymerization Parameters for LiCoO2 Battery Electrode Manufacturing |
Optimized Dissolvable Support Design for 316L Stainless Steel Produced by Laser Powder Bed Fusion |
Optimizing 3D Printed Tourniquets for Immediate Aid in Ukraine |
Optimizing Build Plate Adhesion of Polymers in Fused Granule Fabrication Processes |
Origami Expandable Printing using Fused Granular Fabrication and Fabric Substrates |
ORNL Large-scale Metal Slicer: A Custom Software that Meets the Challenges brought by Growing Complexity of Parts in Wire Arc Additive Manufacturing |
Phase-field modeling of microstructure evolution in additive manufacturing with a physics-informed graph network approach |
Phase Transformation Dynamics-guided Alloy Design for Additive Manufacturing |
Physics-based Feedforward Control of Laser Powder Bed Fusion Process |
Physics-Informed Learning of Real-time Residual Stress in Laser Powder Bed Fusion |
Porosity Prediction for Multiple Processing Regimes in Laser Powder Bed Fusion via Machine Learning of In-situ Multi-modal Monitoring Data |
Post-processing Volumetric Additive Manufacturing Components |
Potential of Dual Laser Array Powder Bed Fusion for the Processing of Nickel-base Alloy 625 |
Powder Bed Fusion of Polymers with Ultraviolet Light Emitting Diode Energy Sources |
Powder Bed Fusion of Polypropylene Produced via Thermally Induced Phase Separation |
Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance |
Predicting Geometric Accuracy via Image-to-image Machine Learning |
Prediction of Microstructure in LPBF using Part-level Thermal Simulations, In-process Sensor Data, and Machine Learning |
Prediction of Microstructure in LPBF using Part-level Thermal Simulations, In-process Sensor Data, and Machine Learning |
Preventing Recoater Crash in Laser Powder Bed Fusion via Modified Inherent Strain Modeling |
Preventing Recoater Crash in Laser Powder Bed Fusion via Modified Inherent Strain Modeling |
Print Initiation and Termination in Glass Additive Manufacturing |
Printability of Nickel Alloy 718 Using a Systematic Process Optimization Framework with Different Layer Thicknesses |
Printability Studies of 316L Stainless Steel by Paste Deposition Modeling |
Printed Photonics Using Single Mode Optical Fiber |
Printing Multifunctional High Performance Polymer Parts via the Hybridization of Direct Ink Write and High Temperature Fused Filament Fabrication |
Process-controlled Grading of the Young's Modulus of AlSi10Mg Components Using L-PBF |
Process-specific Microstructure-sensitive Modeling of Fatigue in Additively Manufactured Ti-6Al-4V Alloys |
Process Development and Thermomechanical Modeling of Laser Hot Wire Additive Manufacturing Process |
Process Monitoring for Pore Detection using in situ X-ray Imaging and Pyrometry Signal |
Process Monitoring of Laser Powder Bed Fusion Additive Manufacturing using Thermionic Emission Detection |
Process optimisation of PA11 in fiber-laser powder-bed fusion through loading of an optical absorber |
Process Response of Martensitic 250 Stainless Steel Alloy + Wire Arc Additive Manufacturing with Cold Metal Transfer |
Processing Evaluation of Al-4008 (Al-Si-Mg) Alloy via Liquid Metal Jetting-based Additive Manufacturing |
Processing of Cu-Al-Fe Bronze via Liquid Metal Jetting Based Additive Manufacturing |
Rapid Qualification of Wire Feed Direct Energy Deposition Process Builds using ICME Approach |
Rapid Three-dimensional Printing of Architected Piezoelectric Structures Using Micro-CLIP |
Reactive Binder Jet Additive Manufacturing for Microstructural Control of Ceramic Components |
Reactive Extrusion Additive Manufacturing of a Highly Loaded Carbon Fiber Reinforced Epoxy |
Reactive Extrusion Additive Manufacturing (REAM) of Functionally Graded Field-Responsive Thermoset Composites |
Real-time Process Monitoring and Closed-loop Laser Power Control in Powder Bed Fusion |
Reconstructing 3D Melt Pool Geometry from Coaxial Melt Pool Image for Powder Bed Fusion Additive Manufacturing |
Recycling of Polymer Powders in SLS: Consequences on Flowability and Electrostatic Properties |
Recycling PET Bottles in a Fused Granule Fabrication Additive Manufacturing System |
Reducing Part Distortion in Laser Powder Bed Fusion through Data-driven Topology Optimization |
Reducing Part Distortion in Laser Powder Bed Fusion Through Data-driven Topology Optimization |
Reducing Porosity of Extruded Fiber Reinforced Thermoplastics with a Vacuum-Assisted Pellet Hopper |
Regional Porosity Measurement in Laser Powder Bed Fusion |
Relationship between Flow-controlled Fiber Orientation and Spring-in Deformation in Extrusion Deposition Additive Manufacturing |
Reliable PEDOT:PSS inks using bio-renewable green co-solvents for Inkjet 3D-printed electronics |
Repeatability and Sensitivity of a Rotating Drum Method for Rheological Characterization of Stainless Steel Powders Used for Additive Manufacturing |
Resin Development for On-Orbit Fabrication of Spacecraft Structures by Direct Solar Polymerization |
Revealing Melt Flow Instabilities in Laser Powder Bed Fusion Additive Manufacturing of Aluminum Alloy via In-situ High Speed X-ray Imaging |
Revealing Texture-induced Abnormal Tensile Deformation Behavior in Additively Manufactured Haynes 282 using Crystal Plasticity Simulations |
Rheological Characterization of Room Temperature Powder Metal Paste for Extruded Material Modeling |
Robot-guided Electrophotographic Powder Application System for Powder Bed Fusion of Metals by means of Laser Beam |
Robot-to-robot Collision Avoidance and Tool Path Recovery for A Multi-robot Wire-fed Ded System |
Robotic Additive Manufacturing of Thermoplastic Composite Assistive Technology |
Robotic Path Planning for the Automated Design of Compositionally Graded Alloys |
Role of Pre-treatments in Printed Flexible and Stretchable (Bio-) Electronics |
Sampling Internal Temperature Distributions Within Parts Being Manufactured by the Metal Laser Powder Bed Fusion Process |
Shared Teleoperation Architecture for Endoscopic Additive Manufacturing |
Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder |
Simplified Unsupervised Statistical Anomaly Detection for In-situ Quality Control of Directed Energy Deposition (DED) Additive Manufacturing |
Simulation of Curing Behavior with Temperature Dependent Kinetic Constants in Vat Photopolymerization |
Single-part Tracking Enabled by Fluorescent Polysecure Tracing Particles in AM Parts |
Single Particle Impacts in Micro Cold Spray |
Size and Processing Parameter Effects in Laser Powder Bed Fusion of Inconel 718 |
Size Effects on Elastic Moduli of Polymers 3D Printed by Fused Deposition Modeling |
Soybean-Derived Printed Graphene Structures via Aerosol Jet Printing Process
|
Spatiotemporal Modeling of the L-PBF Thermal Field History |
Stent Design Investigation for Polymeric and Metallic Materials using Finite Element Modeling of the Crimping Process |
Strength Comparison of a Topology Optimized Truss Structure from Printed SLA Resin, Electroplated Resin and DMLS Aluminum |
Structure-Property Relationships in Copper Made via Laser Powder Bed Fusion |
Studies on Thin and Thick-walled SS316L Overhanging Specimens Manufactured Using Powder-fed Laser-based Directed Energy Deposition |
Study of Different Aging Conditions for Analysis of Microstructure and Mechanical Properties of F357 Alloy Fabricatd in LPBF printer |
Study of Proximity Effect in Projection-based Micro Stereolithography Process |
Study on Development of DLP Printed Metal - Ceramic Structures |
Support-free Sintering of 3D Printed Binder Jet Copper Parts and Stainless Steel Parts
|
Surface-based Lattice Structures as Candidates for Heat Exchangers |
Surface Morphology and Hardness of Powder Bed Fused Ss316l as a Function of Process Parameters |
Surface Nanotextured Powders for 3D Printing of High Reflectivity Metals |
Surface Polishing for Additively Manufactured Titanium Bone Scaffolds to Improve Osseointegration |
Tailoring Porosity in Laser Powder Bed Fusion by Spatial Manipulation of Feedstock Composition |
The Case for an End-to-end Software-hardware Stack in Wire Arc Additive Manufacturing |
The Case for Flipping the Manufacturing Classroom |
The Effect of a Gas Stagnation Region on Nanoparticle Impact Velocity during Micro-Cold Spray |
The Effect of Heat Treatment on Microstructural and Mechanical Performance of a Laser Powder Bed-fused Al-Cu-Mg-Ag-Ti-B Alloy: As-built Versus T7 Heat Treated |
The Effect of Heat Treatment on the Microstructure and Tensile Properties of L-PBF Haynes 214 |
The effects of powder feedstock and process parameters on the material characteristics of Ti6Al4V thin strut features fabricated by laser powder bed fusion additive manufacturing |
The Failure of Wire-arc Additive Manufactured Aluminum Alloys With Porosities Under Loadings as Observed by In-situ X-ray Micro-computed Tomography |
The Impact of as-built Surface Roughness on Vibration Bending Fatigue of Additively Manufactured Nickel Alloy 718 |
The Impact of Measurement Methodology on the Diameter Measurement of Simple Additively Manufactured Features |
The Impact of the Printed Part Geometry on the Shrinkage and the Density of 316L Stainless Steel Parts Printed by FFF/FDM Technology. |
The Measurement of Orientation and Elasticity by Spatially Resolved Acoustic Spectroscopy (SRAS) |
The Resilience of Laser Powder Bed Fusion to Power Perturbations |
Thermal-Imaging Feedback Control of Glass Additive Manufacturing Deposition Products |
Thermal History Validation of Directed Energy Deposition Process |
Thermal Modeling of Wire Arc Additive Manufacturing using Spectral Graph Theory |
Thermally Switchable Build Table by Mechanical Interlocking for Additive Manufacturing |
Thin-walled Part Properties in PBF-LB/P — Experimental Understanding and Nonlocal Material Model |
Three-dimensional (3D) Simulation of Micro-Void Development within Large Scale Polymer Composite Deposition Beads |
Toolpath Planning for Multiple Build Points using K-Means Clustering |
Towards an Automated Methodology for Optically Cured, High Thickness Composite Polymer Pastes: an ISO-based Approach for Large Area Additive Manufacturing |
Towards directed energy deposition of metals using polymer-based supports: porosity of 316L stainless steel deposited on carbon-fiber-reinforced ABS |
Towards Inline Material Microstructure Imaging using Spatially Resolved Acoustic Spectroscopy (SRAS) |
Towards Non-Planar Woven Carbon Fiber Composite Surfaces |
Towards Online Monitoring and Data-driven Control: A Study of Segmentation Algorithms for Laser Powder Bed Fusion Processes |
Towards Regulating Internal Temperature Distributions during Powder Bed Fusion Builds using Model Predictive Control |
Towards Tractable, Fully Time-resolved Simulations of Engineering Scale Parts Built using
the Laser Powder Bed Fusion Process |
Transferring Printability Knowledge Across SS316L and IN718 in Laser Directed Energy Deposition using Machine Learning |
Ultrasonic Characterization of Sound Speeds in 3D-printed Polymers |
Uncertainty Quantification of Response Surface Methodology to Establish an Efficient Printability Assessment Framework in Directed Energy Deposition |
Understand Powder Deposition Behaviors of a Novel Electrostatic Powder Spreading Technique using Molecular Dynamics Simulation |
Understanding Correlations between Processing Parameters and Part Geometry in Robotic Reactive Extrusion Additive Manufacturing (REAM) |
Usability and Limitations for Predicting Melt Pool Dimensions via Dimensionless Numbers in Laser Powder Bed Fusion (LPBF) |
Use of a Fluid Interface to Reduce Support Structures in Top-down Stereolithography |
Use of a Penetrating Deposition Nozzle for Z-Pinning Additive Manufacturing |
Use of Extreme Value Statistics for Establishing Process-Porosity-Fatigue Relationships in Laser Powder Bed Fusion Additive Manufacturing |
Using Mean Curvature of Implicitly Defined Minimal Surface Approximations to Generate New Unit Cells for Lattice Design |
Using Process Monitoring Signals to Identify Defects during Laser Powder Bed Fusion |
Using Recycled Carbon Fiber Reinforced Polycarbonate as a Feedstock Material for Large Format Additive Manufacturing |
Using Solid Freeform Fabrication to develop a low cost Robotics experiment platform to complement classroom learning and exploring topics in STEM Education |
Utilizing Lattice Infill Structures to Optimize Weight with Structural Integrity Investigation for Commonly Used 3D Printing Technologies |
Validation and Comparison of FEM-Simulation Results of the Fused Deposition Modeling Process under Consideration of Different Mesh Resolutions |
Verification Process for Laser Powder Bed Fusion Machine Health |
Vibration Reduction using Material Jetted Parts for Sander Grips |
Visualization of Melt Pool Stability for Wire- and Powder-based Directed Energy Deposition Repair of Gray Cast Iron |
Volumetric Sintering of Polymers via Radio Frequency Additive Manufacturing |
WAAM GPU-accelerated Process Simulation Using an Improved Modeling Workflow |
Wire-arc Fabrication of Topology Optimized Aviation Components |
Wire Arc Additive Manufacturing of Reduced Activation Ferritic Martensitic (RAFM) Steel |
X-ray Analysis of Magnetically Induced Additive Manufacturing |
X-ray Tomography as a 3D Metrology Technique for AM Materials |
Z-Chunking for Cooperative 3D Printing of Large and Tall Objects |