ProgramMaster Logo
Conference Tools for 2019 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2019 TMS Annual Meeting & Exhibition
Symposium Gamma (FCC)/Gamma-Prime (L12) Co-Based Superalloys III
Presentation Title Effect of Tertiary Gamma Prime on the Creep Performance of a Developmental Co:Ni-Base Superalloy
Author(s) Ioannis Bantounas, Vassili A Vorontsov, Mark C Hardy, David Dye
On-Site Speaker (Planned) Ioannis Bantounas
Abstract Scope Creep tests have been performed on an experimental Co:Ni-base superalloy to investigate the creep performance and deformation mechanisms in microstructural conditions with and without tertiary gamma prime precipitates. The precipitation of tertiary gamma prime resulted in a slower minimum creep rate and an accompanying threefold improvement in the rupture life of the alloy. Site specific transmission electron microscopy foils were prepared using the focussed ion beam technique from each of the samples from grains of similar orientations. The deformation mechanisms are analysed to elucidate the role of the tertiary gamma prime on the alloy's creep performance.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Rapid and Simplified Approach to Accurately Measure Single Crystal Elastic Constants
An ICME-base Investigation of the Homogenization of a Novel VIM/VAR Co-Ni Superalloy
Balancing the Property Suite in Co-base Superalloys
Creep Deformation Mechanisms and Compositional Changes in SX Co-base Superalloys Studied by Means of EM and APT
Crystal Plasticity Finite Element Approach to Modeling the Creep Behavior in Cobalt-based Superalloys
Development of Ni/Co Based Superalloys: CALPHAD and Materials Databases
Effect of Pre-deformation on the Aging Response of Co/Ni-base Superalloys
Effect of Tertiary Gamma Prime on the Creep Performance of a Developmental Co:Ni-Base Superalloy
Elemental Partitioning and Site-occupancy Behavior of Alloying Elements in γ/γ′-Strengthened Co-Ti based Alloys
Elucidating the Effects of Cr on the Microstructure, Oxidation Resistance and Mechanical Properties of Cobalt-based Superalloys
Exploration of Thermo-Mechanical Processing Parameters for a Polycrystalline γ-γ' Cobalt-base Alloy
Low Cycle Fatigue of Single Crystal γ'-Strengthened Co-based Superalloys at 750 °C in Air
M-13: Diffusion in FCC Co-rich Co-Cr-Ni-Ta Alloys
M-14: Effects of Cr and Al Additions on the Microstructure and Mechanical Properties of Co-Ti-W Based Alloys
M-15: The Effect of Titanium on the Tungsten-free Cobalt-base superalloys
Microstructural and Compositional Design of Multicomponent Co/Ni-based Superalloys using High-throughput Diffusion Multiples
Partitioning Preferences of Alloying Elements and their Effect on the Stability of the γʹ/L12-phase in Co-base Superalloys
Solute Segregation Effects at Planar Defects during Creep of CoNi-based Superalloys
Structural Evolution of a Single Crystal Co-base Superalloy during Creep at 1000ºC/137 MPa
The Effect of Long Term Exposure at Elevated Temperature on the Stability of a Novel Co-Ni Based Superalloy
The Formation of Protective Alumina on γ’-Strengthened Co-Ni-Al-Mo-Ta Alloys during Exposure at Elevated Temperatures
The Hunt for B and C in Grain Boundaries and their Role in Crack Tip Embrittlement
Thermophysical and Mechanical Properties of Multi-nary Single Crystalline Co-base Superalloys
Towards Developing a New Generation of Cobalt Based Superalloys
Wrought Co-base Superalloys – Mechanical Properties and Deformation Mechanisms
γ+γ′ Microstructures in W-free Co-Ta-V- and Co-Nb-V-based Systems
Questions about ProgramMaster? Contact programming@programmaster.org