3D Bio Printed Biodegradable Composite Material for Pediatric Craniomaxillofacial Implants

3D Metal Nanoparticle-polymer Composites: Strategies for Integrating Metal Nanoparticles with Two-photon Polymerization Process

3D Printed Intelligently Graded Functional Stiffness Foam for Sturdier Multi Stiffness Materials

3D Printing of Complex Wire Geometries for Tailored Resistance Response

3D Printing of Continuous Stainless Steel Fiber Reinforced Polymer Composites

3D Printing of Gel Polymer Electrolytes via Vat Photopolymerization for Lithium-ion Batteries

3D Printing of High-performance Carbon Fiber Composites via Modified Drop-on-demand Method

3D Printing of Passive Microfluidic Flow Mixers using Triply Period Minimal Surface Microlattice Structures

A Case Study of Cognitive Workload and Design Knowledge Gaps in Hybrid Manufacturing Teams

A Case Study on Lightweight Design of a Robot Leg: Integrating Topology Optimization and Lattice Configuration

A Comparison of Mechanical Properties from Natural and Process Induced Interfaces in Filament Extrusion Additive Manufacturing of Polymer Blends

A Comparison of Microstructure and Mechanical Performance of Inconel 718 Manufactured via L-PBF, LP-DED, and WAAM Technologies

A Comparison of the Mechanical Behavior of AlSi7Mg Alloy Produced Through Additive Manufacturing and Subjected to Different Heat Treatment and Aging Conditions

A Data-driven Distortion Compensation Method and the Necessity to Consider Spatial Effects in Binder Jet Parts

A Data-driven Reverse Shape Compensation Method to Reduce Large Deformation in Binder Jet Parts

A Data-driven Surrogate Model for Time-dependent Scanwise Thermal Simulations of Laser Powder Bed Fusion Parts

A Data Driven-based Geometric Compensation Method for Laser Powder Bed Fusion

A Data Driven-based Geometric Compensation Method for Laser Powder Bed Fusion

A Framework for Physics-guided Machine Learning to Extract and Transfer Process-structure-property Knowledge in Additive Manufacturing

A Hybrid Aerosol Jet Printing and Electrochemical Deposition Process for Manufacturing Multi-layer Inductors and Transformers

A Local Preheat Temperature Dependent Stochastic Finite Element Heat Source Model for Inconel 718 Laser Powder Bed Fusion

A Machine Learning Approach to Part Scale Microstructure Predictions in LPBF

A Novel 4D Printing Approach for Freeform Electronics

A Novel Coating Method Used to Enable Multilayer Structures with Microscale Selective Laser Sintering

A Novel Metric for Geometric Accuracy Quantification using Point Clouds in Additive Manufacutring

A Physics-guided Data-driven Model for Enhanced Temperature Prediction and Control of LPBF Additive Manufacturing

A Pilot Study on Temperature Monitoring and Morphology of the Meltpool in EB-PBF of Copper using Numerical and Analytical Models

A Preliminary Understanding of Process-property Effects on the Thermal Response via High-throughput Finite Element Models of Wire Arc Direct Energy Deposition

A Review on the Joining Mechanisms of Multiple Materials using Additive Manufacturing

A Robust Local Preheat Temperature Dependent Stochastic Finite Element Heat Source Model for Inconel 718 Laser Powder Bed Fusion

A Scientific Artificial Intelligence (Sci-AI)-based Concurrent Multiscale Simulation Framework for Accurate Temperature Prediction of Large-scale Metal Additive Manufacturing

A Small Volume, Local Shielding Gas Chamber with Low Gas Consumption for Laser Wire Additive Manufacturing of Bigger Titanium Parts

A Solid Free Form Fabrication Equipment to Manufacture Axisymmetric Parts with Improved Surface Quality

A Spherical Test Artifact to Evaluate Three-dimensional Form Accuracy for Wire Arc Additive Manufacturing

A Study of Additively Manufactured Ti-6Al-4V ELI Surface Roughness Coupons with Differing Processing Parameters

Absorptivity Behavior of High Reflectivity Aluminum and Copper Alloys During Laser Powder Bed Fusion

Accelerating Design and Additive Manufacturing of Polymer Matrix Composites

Acoustic Mechanisms of Laser Powder Bed Fusion through an Analogous Whistle Model

Adapting a Conventional Design for Additive Manufacturing Workflow to Account for Continuous Carbon Fiber Reinforced Parts

Adaptively Sampled Distance Functions: A Unifying Digital Twin Representation for Additive Manufacturing

Additive Compliant Mechanisms for Deployable Space Structures

Additive Manufacturing and the Moving NDT Target

Additive Manufacturing of High Entropy Shape Memory Polymer Blends

Additive Manufacturing of Hybrid Sandwich Sheets by Laser Powder Bed Fusion of Metals

Additive Manufacturing of Modular Soft Stretchable Elastomers for Adaptive Dissipative Structures

Additive Manufacturing of ODS Steels using Powder Feedstock Atomized with Elemental Yttrium

Additive Manufacturing of Person Specific Diabetic Foot Insoles with Adjustable Cushioning Properties using TPMS Lattice Structures

Additive Manufacturing of Self-healing Polymers as a Pathway for Environmental Stability

Additive Manufacturing of Shape-conforming Battery Components from Lunar and Martian Soil

Additive Manufacturing of Si-SiC Cermets by Binder Jetting with Si infiltration – Process and Material Properties

Additive Manufacturing (AM) Lattice Segmentation and Analysis Enabled through Deep Learning

Additively Manufactured Inconel718-Methanol Heat Pipe: Fabrication and Low Temperature Thermal Testing

Additively Manufactured LiCoO2-based Photocurable Resin as Positive Electrode for Lithium-ion Batteries

Additively Manufactured Lunar Rover Wheel Case Study

Additively Manufactured Molds for Large Gyroid Structures Cast from Concrete

Advancing Sodium-ion Battery Technology for Both Terrestrial and Extraterrestrial Applications through 3D Printed Electrolytes

Advancing the Process Window for Reliable Metal Droplet-on-demand Manufacturing

AI-driven In Situ Detection of Keyhole Pore Generation in Laser Powder Bed Fusion

AM Process Development of NASA HR1 Alloy using Laser Powder Direct Energy Deposition (LP-DED).

Amorphous Magnetic Alloys Printed from Carbonyl Based Metal-organic Decomposition Inks

An Adaptive Meshing Framework using Octree Data Structure for Voxel Based Meshes

An Effective Method for Predicting the Mechanical Properties of Parts with Site-specific Microstructure

An Ensemble Kalman Filter Method for Laser Powder Bed Fusion Temperature Estimation, Augmented with Adaptive Meshing and Joint Estimation of the Absorptivity

An Evaluation of a Programmatic Method for the Generation of Finite Element Event Series for Additive Manufacturing Against Machine Print Paths

An Experimentally-tuned Finite Element Model for Predicting Sintering Deformation in Binder-jet Additive Manufacturing

An Ultrasonic Technique to Determine the Onset of Localized Sintering in Additive Manufactured Ceramics

Analysis of Flow Additives in Laser-based Powder Bed Fusion of Polymers: Implications for Flow Behavior, Processing, Temperature Profile, and Part Characteristics

Analysis of Porosity in LPBF SS316L by X-Ray Computed Tomography

Analytical Modeling of Cooling Rates in PBF-LB/M of Bulk Metallic Glasses

Anticounterfeiting Signatures for Additively Manufactured Parts via Electromechanical Impedance Measurements

Application of In-situ Process Monitoring to Optimise Laser Parameters during the L-PBF Printing of Ti-6Al-4V Parts with Overhang Structures

Assembly-free Hybrid Printing of Microfluidic Devices for Biosensing

Assessing the Impact of Melt Pool Variability on Fatigue Life in Laser Powder Bed Fusion

Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide 613 Composites Made by Laser Sintering

Automated Fiber Length Measurement for 3D Printed Polymer Composites, Including Identification and Measurement of Non-trivially Placed Fibers

Automated Layer Identification in Large Area Additive Manufacturing (LAAM): A Comparison of Image Thresholding and Edge Detection Techniques

Bayesian Data-augmentation of Thermal Models for Design of Nb-Ta-W Alloys

Behavior of Additively Manufactured Plate-lattice Structures in Quasi-static, Dynamic, and Ballistic Testing

Benchmarking the Tensile Properties of Polylactic Acid (PLA) Recycled through Fused Granule Fabrication Additive Manufacturing

Beyond Throughput-resolution-flexibility Tradeoffs with Mutliplexed Fused Fabrication

Binder Evaporation During Powder Sheet Additive Manufacturing

Binding and Alloying Properties of a Solid-free Organic Binder in Binder Jetting Additive Manufacturing of Steel

Bio-inspired AM Structure using Co-extruded Continuous Carbon Fibre Reinforcement

Building Blocks for Understanding Triply Periodic Surfaces: A Visual and Tactile Learning Aid

Building Equation-based Lattice Structures using Large Minimum Feature Size AM Processes

Calibration Method for Combined Structured Light and Additive Manufacturing Systems

Catalog of Triply Periodic Minimal Surfaces, Equation-based Lattice Structures, and Their Homogenized Property Data

Challenges in Wire-Arc Additive Manufacture of Nickel Aluminum Bronze

Characterization and Validation Experiments for a Binder Jet 3D Printing Modeling Framework

Characterization of Thermoset Feedstocks for Laser Powder Bed Fusion

Characterizing Thermomechanical Performance of Large-format Printed Composite Polymer Structures

CIFEM: Elucidating the Role of Local Preheat Temperature on Multi-track Melt Pool Morphology Variation for Inconel 718 Laser Powder Bed Fusion

Co-design of 3D Printing, Parts and Microstructure in High-temperature and High-pressure Heat Exchangers

Coaxial Color Channel Focus Evaluation to Estimate Standoff Height in Directed Energy Deposition

Coaxial Photodiode Signal Trends and Predictions: Power, Speed, Spot Size, Material and Time

Comparative Analysis of Process Stability in PBF-LB/M: (Thermal) Highspeed Imaging vs. Melt Pool Monitoring using Novel Gas Mixtures

Comparative Success of EBM and SLM for Fabrication of Lattice Structures in Metal Orthopaedic Implants

Comparing the Effects of Different Chemical Treatments on Surface Texture and Fatigue Behavior of U-notched Additive Manufactured AlSi10Mg

Comparison of High-resolution Aerosol Jet Printing of Silver Inductors on Rotary and Linear Stages

Comparison of Layerwise Preheating and Post Heating Laser Scan on the Microstructure and Mechanical Properties of L-PBF Ti6Al4V

Comparison of Process Control Methods for Wire-arc Directed Energy Deposition of Low Carbon Steels with In-situ Temperature Measurement

Comparison of Surface Texture from Various Surface Morphology Techniques for Evaluating As-built Ti6Al4V Laser Powder Bed Fusion

Comparison of tensile and compressive behavior of triply periodic minimal surface lattices fabricated by laser powder bed fusion

Complex Laser Beam Shaping for Improved Process Control in Metal Additive Manufacturing

Compositional Variation Effect on the Microstructure and Nanomechanical Properties of Additively Manufactured AlCuFeNiTi High Entropy Alloy

Compositionally Graded Transition from Tungsten to Ferritic-martensitic Steels via Directed Energy Deposition

Computer Vision for Powder Mass Flow Rate Measurement in Blown Powder Directed Energy Deposition

Continuous Fiber Reinforced Composites: Design for Additive Manufacturing

Control of Track Morphology in Digital Glass Forming

Controlling Chemical Composition Changes in Laser Powder Bed Fusion of AlSi10Mg

Convergence Studies of Ensemble Kalman Filter Accuracy at Estimating Powder Bed Fusion Temperatures as a Function of Measurement Resolution

Corner Effects on Fatigue for As-printed Surfaces in Alloy 718

Cyber-informed Additively Manufactured Functionally Graded Materials and Structures

Data-driven Local Porosity Prediction in Laser Powder Bed Fusion via In-situ Monitoring

Data-driven Local Porosity Prediction in Laser Powder Bed Fusion via In-situ Monitoring

Data Management for Additive Manufacturing Process Monitoring

Data Pipelines for Direct Ink Write Digital Twins

Deformation Pattern of Cellular Mechanical Interface in a Bi-material Structure Fabricated by Material Extrusion Additive Manufacturing

Demonstrating Paraflow: Interactive Fluid Dynamics Simulation with Real-time Visualization for Augmented Resin 3D Printing

Depiction of Support Structures in Technical Drawings

Design and Integration of a Multi-modal Machine Safety Architecture for a Novel AM-CM System

Design for Internal Lattice Structures with Application in Additive Manufacturing

Design For(e!) Additive Manufacturing: In Search of a Comprehensive Design Challenge Suitable Across AM Education

Design of Lightweight 3D Printed Structures for the 7th Annual 3D Printed Aircraft Competition

Design of Spatially Varying Orientation Lattice Structures using Triply Periodic Minimal Surfaces

Design of Three-dimensional Complex Truss Metamaterials with Graph Neural Networks

Design Optimization, Multi-axis Additive Manufacturing, and Mechanical Evaluation of Continuous-fiber Composite Structures

Designing for Circular Economies: Creating Impact from Local Plastic Waste using Off-grid Containerized 3D Printers & Practice Based Learning

Designing for Cleanability: A Topology Optimization Approach for Electron Beam Melted Parts

Design, Analysis, Optimization, and Fabrication of Porous/Heterogeneous Microstructures via Spline-based Volumetric Representations

Detecting Failures in Laser Powder Bed Fusion Additive Manufacturing of Complex Lattice Structures using Multi-sensor Data and Machine Learning

Detecting the Onset of Flash Event in Selective Laser Flash Sintering

Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process

Determination of Input Laser Energy for Melting Powder Layers of Various Thicknesses in High-speed PBF-LB/P using Near-infrared Laser and Absorbent

Developing Additively Manufactured Iron Powder-filled PLA Composites

Development and Analysis of Direct-write Photopolymer, Multi-material Manufacturing Process

Development of 3D Printable Part Library for Easy to Manufacture Components for Educational and Competetive Robotics

Development of a Testbench for Additive Manufacturing Data Integration, Management, and Analytics

Development of Artificially Tuned Microstructure using Interpenetrating Lattices Fabricated by Laser Powder Bed Fusion

Development of Dual-head MetalJet System for Drop-on-demand Multi-metal Deposition

Development of Flexible Circuits using Epoxy-based Flexible Electrical Conductors

Development of High Filled Bio-based Composites for Sustainable, Low-cost Feedstock: Processing Effects on Porosity and Fiber Alignment

Development of Joint Manufacturing and In-line Metrology System for the Patterning of 3D Holographic Structures in Roll-to-roll Processes

Development of Multimaterial Additive Manufacturing Systems for the Embedded Electronics

Development of Soft Gripper Pneumatic Control System Based on Deep Reinforcement Learning

Digital Model Generation Strategy for Printing Miniaturized Replica of Historical Cast Iron Objects - A Use Case Study

Directed Energy Deposition of Stainless Steel 304L to Inconel 625 Gradients: Print Strategies and Defects

Directional Dependence of IN718 Gyroid TPMS Lattices Fabricated by Selective Laser Melting

Discovery of Next-generation Battery Electrodes using Topology Optimisation

Dissimilar Vacuum Brazing of Additive Manufactured 17-4PH Stainless Steel to Conventional 304 and 17-4 Stainless Steel by BNi-2 Brazing Filler Material

Distilling Thermal Signatures from Reduced Order Physics Models for Electron Beam Powder Bed Fusion Processing

Distortion and Residual Stress Mitigation of Large Parts for Wire-arc Additive Manufacturing

Distortion and Residual Stress Mitigation of Large Parts for Wire-arc Additive Manufacturing

Distributed Optical Fiber Testing for Additive Manufacturing

Does Finer Powder Get Deposited First in Powder Bed? – A Comparative Study using Simulation and Experimental Techniques

Double-pulse Femtosecond Laser Sintering of Metal Nanoparticles on Flexible Substrate

Dreaming of Data: Examining Data Augmentation for Machine Learning in Additive Manufacturing

Dual-curing 3D Formation of Continuous Fiber Thermoset Composites

Dynamic Start Point Modification in Closed Contour Toolpaths for A Multi-robot Wire-fed Ded System

Effect of Binder Content on Ceramic Paste for Additively Manufactured Parts via Ceramic On-demand Extrusion

Effect of Heat Treatment on High-cycle Fatigue of Additively Manufactured 17% Chromium 4% Nickel Precipitation Hardened Stainless Steel

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Monel K500 Alloy Fabricated via L-PBF and LP-DED

Effect of Heat Treatments on the Tensile Properties of Additively Manufactured 15-5 PH Stainless Steel

Effect of Initial Carbon Content on Tailoring the Mechanical Properties of Additively Manufactured Martensitic Ultra High-strength Steels

Effect Of Inter-Layer Dwell Time on Residual Stresses in Directed Energy Deposition of High Strength Steel Alloy

Effect of Post Thermal Processing Conditions on Physical and Mechanical Properties of LPBF Processed Inconel 718

Effect of Printing Parameters on the Internal Geometry of Products Manufactured by Fused Filament Fabrication (FFF)

Effect of Process Parameters on Microstructure and Properties for the Application of 316L Additively Manufactured Medical Device Components

Effect of Solidification Conditions on the Evolution of Dispersoids in a Ni-20Cr + 1 wt% Y2O3 ODS Alloy Fabricated with Laser Powder Bed Fusion

Effect of Surface State and Material on Surface Quality Enhancement by Dual Laser Powder Bed Fusion

Effect of Temperature on the Cohesiveness of Polymeric Powders: Implications on Spreadability

Effect of the Print Bed Temperature on Void Distribution and Fiber Orientation within the Microstructure of Short Carbon Fiber Reinforced/ABS Manufactured via Large Area Additive Manufacturing

Effectiveness of Ex-situ Heat Treatment of L-PBF AM 17-4PH Stainless Steel Specimens Intentionally Exposed to Different As-built Thermal Histories

Effects of Build Orientation and Heat Treatment on the Porosity Distribution and Morphology within Inconel 625 Fabricated via Laser Powder Bed Fusion

Effects of Double-pulse Waveform on Piezoelectric Inkjet Printing Speed

Effects of Fiber Alignment on the Thermomechnical Properties of Large-format Printed Composite Polymer Structures

Effects of Preheating and Multi-laser Melting of Refractory Alloys in Laser Powder Bed Fusion

Effects of Surface Roughness, Process Parameters, and Heat Treatments on the Fatigue Properties of Laser Powder Bed Fusion of 316L Stainless Steel

Efficient Thermomechanical Simulation for WAAM using Automated GPU-based Modeling

Efficient Thermomechanical Simulation for WAAM using Automated GPU-based Modeling

Electrochemical Stability of 3D Printed Separators and Gaskets for Shape-conformable Lithium-ion Batteries

Electroslag Strip Cladding for Additive Manufacturing

Elucidating Size and Location Effects on Green Density of Binder Jet Additive Manufactured Parts

Elucidating the Role of Local Preheat Temperature on Multi-track Melt Pool Morphology Variation for Inconel 718 Laser Powder Bed Fusion via CIFEM

Embedding Fiber Optic Sensors in Metal Components via Direct Energy Deposition

Embedding of Luminescent Pigments within 316L Stainless Steel Matrix by Laser Powder Bed Fusion for Optical Functionalities

Embedding Temperature Sensors with the Use of Laser-Foil-Printing Additive Manufacturing

Enabling Advances in Laser Powder Bed Fusion with In Situ Monitoring

Enabling Multi-material LPBF Printing via Electrostatic Powder Spreading of Patterned Powder Beds

Enabling Part-scale Melt Pool Prediction in Laser Powder Bed Fusion via a Global-local Thermal Process Simulation Model

Enabling Part-scale Melt Pool Prediction in Laser Powder Bed Fusion via a Global-local Thermal Process Simulation Model

End-to-end AI Models for Error Detection and Correction in Extrusion AM

Energy Flow (Bond Graph) Dynamic Modelling of Cartesian-frame FFF 3-D Printer Gantry

Engineering Hydrophobic Stainless Steel Nanocomposites

Enhancement of Profile Data for Repetitive Process Control Measurements in DED Additive Manufacturing

Enhancing the Thermal Stability of Polyamide 6 in Powder Bed Fusion via Primary and Secondary Antioxidant Incorporation

Equalization of Metal Powder for Binder Jet Printing

Estimating Effective Stiffness of FFF Components based on Layer-by-Layer Raster Orientation obtained from Ultrasonic Waveform Analysis

Evaluating Residual Heat-driven Melt Pool Variation through GPU-based Thermal Process Simulation

Evaluating the Compressive Strength of AM Risers for Green Sand Metalcasting

Evaluation of the Performance of 3D Printed Cutting Guides for Canine Caudal Maxillectomy

Evolution of Creep Damage of 316L Produced by Laser Powder Bed Fusion

Experimental and Computational Study of Area Printing™ Additive Manufacturing: Inconel 718 and M300 Maraging Steel Density Improvement

Experimental and Finite Element Comparison of 3-axis and 5-axis Wire Arc Directed Energy Deposition

Experimental and Numerical Investigations on Dynamic Mechanical Properties of TPMS Structures

Experimental Characterization of Enhanced Fused Filament Fabricated Tall Thin-walled Structures Using Polylactic Acid (PLA)

Experimental Characterization of the Mechanical Properties of 3D Printed Bézier-based Lattice Beams

Experimental Evaluation of Hierarchical Functionally Graded Lattices Using Digital Image Correlation and Micro-CT

Experimental Investigations of Inhomogeneous Component Properties in Laser-based Additive Manufacturing of AlSi10Mg

Experimental Study of Cryogenic Directed Energy Deposition Conducted at -20°C

Experimental Validations of an Ensemble Kalman Filter Method for Powder Bed Fusion Temperature Estimation

Exploratory Study of In-space Wire Arc Additive Manufacturing with Modeling Approach

Exploring a Supervisory Control System Using ROS2 and IoT Sensors

Exploring Additively Manufactured Heterostructures of Functional Materials: Focus on Interfaces

Exploring Capillary Suspension Technique to Develop 3D Printable Oxide Based Lithium Electrolytes for All Solid-state Batteries by Direct Ink Writing

Exploring IN718 Alloy Production with Bidirectional Raster and Stochastic Spot Melting Techniques using an Open-source Electron Beam Melting System

Exploring the Effects of Oscillatory Deposition Paths on Wire Arc Additive Manufacturing (WAAM) of Al5Mg

Fabrication of 3-Dimensional Flexible Tactile Sensor using Pressure Sensitive Material

Fabrication of Crack-free Aluminum Alloy 6061 Parts using Laser Foil Printing Additive Manufacturing Process

Fabrication of Solid-state Electrolytes Using 3D Printing for Lithium Metal Batteries

Fabrication of Superhydrophobic Surfaces using Waste PET

Fabrication of Supportless Lattice Structures Using Burst Mode Drop-on-Demand Liquid Metal Jetting

Fabrication of Thick Vascularized Tissues using Sacrificial Ink-assisted Embedded 3D Bioprinting

Failure Mechanisms in Grading Inconel 625-GRCop 42 via Hybrid Wire-powder Directed Energy Deposition

Fatigue Endurance Investigation of Post-processed Surfaces of L-PBF Ti-6Al-4V under Flexural Stress

Fatigue Life Prediction of Functionally Graded TPU and PLA Components Produced by Material Extrusion

FE Predictions of Residual Stresses in L-PBF Generated Ti-6Al-4V NIST Bridges

Feasibility of Non-destructive Measurement of Powder Bed Density and Thermal Properties Using Flash Thermography

Fiber-Reinforcement of Binder-Jetted Casting Molds for Multiple Usage

Formation of Easy-to-Remove Support Structures in Metal LPBF with En-situ Powder Bed Doping.

Framework Development for Optimization of DED Parameters using Nickel-Aluminum Bronze Feedstock and Arc Wire Directed Energy Deposition

Fundamentals of Polymer Crystallization in Laser Powder Bed Fusion for New Material Screening

Further Developments of a Novel Low Cost Material Jetting platform for 3D Printing

Fused Filament Fabrication of Polymer Blends with In Situ Layerwise Chemical Modifications

G-Wing: A Novel Software Tool for Toolpath-Centric Design of Wings for Material Extrusion

Gas Flow and Delivered Laser Power Effects on Mechanical Properties

Generation and Simulation of Layer Wait Time to Prevent Overheating

Generative Design of 2D Cellular Structures through Stochastic Modification of 2-Honeycombs

GKN Aerospace Deposition of a Laser Wire DED 2.5m Titanium Aerostructure Demonstrator

Guided Manual Design for Additive Manufacturing of Topologically Optimized Legacy Tooling Parts

Halogen-free Flame-retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis

High-precision Measurement of Melt Pool Properties during Laser-based Powder Bed Fusion of Metals by High-speed Imaging

High-speed Observations and Quantification of Spatter Counts and Trajectories in Laser Powder Bed Fusion

High Fidelity Model of Directed Energy Deposition: Laser-Powder-Melt Pool Interaction and Effect of Laser Beam Profile on Solidification Microstructure

High Frequency Ultrasonic Detection of Security Markers in Additive Manufacturing Components

High Speed Video Imaging of overhang surfaces in Beam Shaped Laser Powder Bed Fusion of 316L stainless steel

How Good is Good Enough? The Economics of In-process Monitoring in AM

Hybrid Electromagnetics: Printed RF Sensitive Structures, Circuits, and Sensors Integrated with Non-traditional Electromagnetic Substrates

Hybrid Geometry/Property Autoencoders for Multi-Lattice Transitions

Hybrid Manufacturing: How Interleaving Processes Enables Local Control of Material Performance

Hybrid Metal Manufacturing of Large Freeform Geometries

Hybrid Metalized Polymer Core (HMPC) Initial Results of Prototype Mass Optimized Pulsed Power Hardware

Hybrid Metalized Polymer Core (HMPC), Initial Concept and Design of Lightweight Additively Manufactured Hardware

Identification of Nanoparticles Dispersion Mechanism in 316L Matrix Additively Manufactured By hybrid Process of Ink Jetting and Laser Powder Bed Fusion

Impact of Powder Deposition Parameters on Powder Catchment Efficiency in Laser Directed Energy Deposition

Implementing In-situ Process Monitoring in Additive Manufacturing to Accelerate Qualification

Improving Fatigue Performance of PBF Metals using Self-terminating Etching Processes

Improving Food 3D Printing Through Texture Modification of Designed Food Inks

Improving the Mechanical Response of the IWP Exo-skeletal Lattice Through Shape Optimization

In- and Ex-situ Neutron Characterization of Metal Additive Processes and Microstructures

In-situ Defect Detection for Laser Powder Bed Fusion with Active Laser Thermography

In-situ Electrical Resistance Measurements for Soldering Studies in Hybrid AM

In-situ Geometric Characterization via Embedded 3D Scanning and Implicit Modeling

In-situ Interferometric Monitoring of Dual-wavelength Vat Photopolymerization

In-situ Monitoring of Wire Arc Additive Manufacturing for Machine Learning Based Prediction of Shape Irregularites and Mechanical Defects

In-situ Process Monitoring System for Large Format Thermoplastic Additive Manufacturing

In-situ Reinforcement Processing for Laser Powder Bed Fused Ti64 Parts

Increasing Precision Towards NiTi Lattice Structure using PBF-EB

Inexpensive Mechanistic-Knowledge-Agnostic Machine Learning in Additive Manufacturing

Influence of In-process Layer-wise Surface Property on the Mechanical Properties of Laser Powder Bed Fusion Products

Influence of Silane-doped Argon Processing Atmosphere on Powder Recycling and Part Properties in L-PBF of Ti-6Al-4V

Influence of steel alloy composition on the process robustness of as-built hardness in laser-directed energy deposition

Influence of Substrate Temperature on the Formation of Individual Weld Paths during Laser Cladding (LMD) when Processing 316L.

Influence of TiC-Nanoparticles on the Material Properties of AlSi10Mg Manufactured by Laser Powder Bed Fusion

Infrared Camera (IR) Feature Extraction for Defect Detection in Laser Powder Bed Fusion

Insights from High-speed Synchrotron X-ray Imaging of Binder-powder Interaction in Binder Jet Printing

Inter-pass Temperature Impact in Wire-Arc Additive Manufacturing

Investigating Correlation Between Melt Pool and Overhang Surface

Investigating the Effect of Generalized Newtonian Fluid on the Micro-void Development within Large Scale Polymer Composite Deposition Beads

Investigating the Effects of Thermal Post-processing Parameters on Interfacial Delamination of Bimetallic 3D Printed Parts

Investigation of Crack Formation Process during Low Temperature Laser Sintering of PEEK by Observing Melt and Solidification Behavior

Investigation of Electrical Properties in TPU/CNT Conductive Composites

Investigation of Instrumenting Robocasting Printer for Ceramic Slurries

Investigation of Multi-Material Liquid Metal Jetting with Copper Materials

Investigation of the Influence of Process Parameters to Increase Productivity in the LPBF Process for the Material Inconel 718

Investigation of the Processability of Polyether Block Amide in High Speed Sintering

Johnson-Cook Failure Model for Additively Manufactured 304L Stainless Steel Parts

Laser beam shape optimization: Exploring alternative profiles to Gaussian-shaped laser beams in powder bed fusion of metals

Laser Induced Breakdown Spectroscopy for In-situ Monitoring of Laser Powder Bed Fusion Processing

Laser Synthesized Molybdenum Trioxide (MoO3) Nanoparticles for Energy Storage Applications

Layer-wise Control Charts in Laser Powder Bed Fusion Metal Additive Manufacturing

Layer-wise In-process Monitoring-and-Feedback System Based on Surface Characteristics Evaluated by Machine-Learning-Generated Criteria

Layer-wise Prediction of Microstructural Evolution in Laser Powder Bed Fusion Additive Manufacturing using Physics-based Machine Learning

Layer-wise Prediction of Microstructure Evolution in Laser Powder Bed Fusion Additive Manufacturing using Physics-based Machine Learning

Level Set Grids for Hybrid Manufacturing

Liquid Metal Jet-on-Demand Printing of Al-6061

Liquid Metal Jetting of Aluminum Parts with Salt Support Structures

Localized Porosity Prediction in Laser Powder Bed Fusion via Deep Learning of Multi-modal Melt Pool Signatures

Localized Shielding Gas Lens and Inert Enclosure Effects on Titanium GMAW for Wire-Arc Additive Manufacturing

Lost-PLA Casting Process Development Using Material Extrusion with Low-density PLA

Machinability of Additively Made Alloys: A Case Study of Ti64 and A205 Alloys

Machine-Learning-Driven Digital Twin Construction for Additive Manufacturing: A Review

Machine Learning-Assisted Prediction of Fatigue Behaviour in Fiber-Reinforced Composites Manufactured via Material Extrusion

Machine Learning Applied to Process Monitoring for Laser Hot Wire Additive Directed Energy Deposition

Machine Learning Assisted Mechanical Metamaterial Design for Additive Manufacturing

Magnetic Characterization of 3D Printed High-performance Polyamide Magnetic Composite

Manufacturability of Custom Shape-conforming Battery Components using VPP

Manufacturing of Foam Dampening Structures for Machining Applications

Material Jetting of Suspension System Components

Materials Screening Methodology for Additive Manufacturing in Bioreactor Technology

Mechanical and Corrosion Response of Minor and Trace Elements in CoCrMo Alloy Powders on Additively Manufactured Dental Crowns and Bridges

Mechanical and Dimensional Characterization of Polymer Powder Bed Fusion Parts for Non-assembly Mechanisms

Mechanical Performance of LPBF Manufactured Haynes 282

Mechanical Properties of Polymer-bonded Magnets Fabricated using Magnetic Field Assisted Additive Manufacturing (MFAAM)

Mechanical Surface Treatment of Polymer Parts Produced by FFF

Mechanical Test Plan of Niobium Alloy C103 for Laser Powder - Direct Energy Deposition

Mechanically Bonding and Thermally Releasing Print Surface for Big Area Additive Manufacturing

Metal Additive Manufacturing of A36 Steel to Improve Techno-economic Performance of Marine Renewable Energy Technology

Metal Additive Manufacturing of Rollers for Railroad Bearings: Rolling Contact Fatigue Performance

Method to Balance Thermals for Multi-functional 3D MJF Printing

Methodical Approach to Reducing Design Time by using Neural Networks in Early Stages of Concept Development

Microstructural and Microhardness Variations of Laser Powder Bed Fusion (L-PBF) Additively Manufactured Inconel 718 Due to Machine Variability and Thickness for Aerospace Applications

Microstructural Investigations on SS316L-Cu Graded Deposition Prepared using Wire Arc Additive Manufacturing

Microstructure and Mechanical Properties of Additively Manufactured Haynes 282: A Comparative Analysis between L-PBF and LP-DED Technologies

Microstructure and Tensile Properties of Aluminum Alloy 4008 (A356) Processed via Liquid Metal Jetting

Microstructures, Mechanical and Thermal Property Evaluation of Binder Jet Printed High Conductivity Copper Parts.

Microtensile Analysis of Additively Manufactured Ti–6Al–4V with Process Parameter Induced Defects

Mining Complex Feedstock-Geometry-Process-Quality Relationships for Powder Bed Fusion Thin Features using Graphical Model

Modeling and Correcting Illumination Inhomogeneity over Multiple DLP Illumination Intensities for Better Fabrication Accuracy

Modeling and Simulation of Vat Photopolymerization Additive Manufacturing: A Review

Modeling Carbon Fiber Suspension Dynamics for Additive Manufacturing Polymer Melt Flows

Modeling Morphological Development of Ti-6Al-4V for Cyclic Thermal Histories in Laser Powder-bed Fusion

Modifying Glass Surface Morphology via Temperature-controlled Laser Melting

Molybdenum Trioxide (MoO3) Nanosheets Imbedded Carbon Nanofibers for Lithium-ion Batteries

Monitoring of Process Stability in Laser Wire Directed Energy Deposition using Machine Vision

Monitoring of Process Stability in Laser Wire Directed Energy Deposition using Machine Vision

Monitoring of Single-track Quality in Laser Powder Bed Fusion using In-situ Thermionic Sensing

Monitoring of Single-track Quality in Laser Powder Bed Fusion using In-situ Thermionic Sensing

Multi-bead and Multilayer Printing Geometric Defect Identification Using Single Bead Trained Models

Multi-laser Diode Area Melting of Ti6Al4V: A Novel Alternative Approach to Traditional Laser Powder Bed Fusion

Multi-load Support Optimization for Minimizing Part Deformation in LPBF

Multi-material Design in Metal Additive Manufacturing

Multi-physics Modeling of Low-temperature Directed Energy Deposition of Stainless Steel 316L

Multimodal Process Monitoring to Predict Outcomes during Laser Powder Bed Fusion

Nanoparticle-modification of NiCu-based Alloy 400 for Laser Powder Bed Fusion

NASA Technology Maturation Plan for In-space Manufacturing of Metals

Non-linear Dynamic Modelling of Cartesian-frame FFF 3-D Printer Gantry for Predictive Control

Novel Concepts to Integrate Dense and Sparse Infill Regions in Material Extrusion AM Parts

Novel Welding Strategies in High Deposition Rate Laser-Assisted Double-Wire Welding Process with Nontransferred Arc

NSF Advanced Manufacturing Program and Funding Opportunities

Numerical and Experimental Investigations on Manufacturability of Al-Si-10Mg Thin Wall Structures Made by LB-PBF

Numerical Investigation of the Spreading and Dynamic Flow Behavior of Poorly Sorted Sand Particles during Binder Jet Additive Manufacturing

Off the Grid: Re-defining Design Resolution in Inkjet 3D-printing for Sub-droplet Position Control and Facile Geometry Improvement

On Process Stability In WAAM-CMT of Aluminum Alloys

On the Effect of Recoater Damage on Spreading Behavior

Open Architecture Control Software for Laser Powder Bed Fusion Machines

Open Loop Control of Selective Laser Flash Sintering of Ceramics

OpenVCAD: An Open Source Volumetric Multi-material Geometry Compiler

Optical Metrology for Laser-matter Interaction in LPBF: Challenges and Opportunities

Optimal Planning and Control for Microhardness Demonstrated in Thin-walled Steel Parts Made via Wire Arc Additive Manufacturing

Optimization of Computational Time for Digital Twin Database in Directed Energy Depostion for Residual Stresses

Optimizing the Surface Texture and Chemistry of Laser Powder Bed Fusion (LPBF) Haynes 282 for Increased Solar Absorptance

Origami Robocasting of High-density Ceramic Structures with Slurry-based Inks

Out-of-plane Mechanical Properties of Additively Manufactured Fractal Reinforced Structures

Oxide Dispersion Strengthened (ODS) SS316L Prepared by Laser Powder Bed Fusion: Analysis of Microstructure and Hardness Properties

Parametric Analyses of Impact of Deposition Pressure on Multi-axis Free-form Fabrication.

Parametric Study of Processing of Ti6Al4V with Multiple 450 nm Diode Lasers

Part Scale Simulation of Heat Affected Zones for Parameter Optimization in a Microscale Selective Laser Sintering System

Path Planning for Non-Planar Robotic Additive Manufacturing

PEEK Parameter Optimization for Fused Deposition Modeling

Photoinhibition Aided Vat Photopolymerization (PinVPP) Additive Manufacturing

Photothermal Bleaching of Nickel Dithiolene for Bright Multi-colored 3D Printed Parts

Physical Validation of Job Placement Optimization in Cooperative 3D Printing

Powder Bed Fusion of Polypropylene-ethylene Co-polymers

Powder Bed Fusion of Ultra-high Molecular Weight Polyethylene via Novel Scan Strategy and Post-process

Powder Bed Fusion Surrogate Models via Convolutional Neural Networks

Predicting Temperature Field for Metal Additive Manufacturing using PINN

Predicting the Printable Parameter Space for Laser Directed Energy Deposition Using a Data Augmented Thermal Model

Prediction of Inter-pass Temperature for Large-scale Double Sided Component Fabricated Electron Beam Wire Additive Manufacturing

Printing Parameter Optimization of Extruded Metal Paste by Response Surface Technique

PRISM: Process Parameter Optimization for Selective Manufacturing

Probing Temperature and Degree-of-conversion States via Tomographic Fluorescence Imaging

Process-integrated Alloy Adjustment in Laser Deposition Welding with Two Wires

Process and Design Strategies for Fluid Wicking in Additively Manufactured Inconel 718 for Monolithic Heat Pipes

Process and Material Optimisations for Integration of Chopped Glass Fibres in Laser Sintered Polymer Parts

Process Modeling for Fluid-Interface Supported Resin Printing

Process Modeling of Multi-Material Laser Powder Bed Fusion

Process Parameter Optimization Using Photodiode Intensity in Laser Powder Bed Fusion

Process Parameters and Interpass Temperature Effects on WAAM Inconel 718

Process Strategy and Geometrical Distortion of Heat-treated 17-4PH Stainless Steel Produced by Interleaved Machining and Blown-powder DED

Process Structure Relationships of Carbide Containing Molybdenum Alloys Produced via Electron Beam Powder Bed Fusion

Providing Anti-counterfeiting Security in Binder Jetting through Tailored Porosity Signatures

Pushing Boundaries: Machine Learning Applied to Selective Laser Melting

Qualification of Low-criticality AM Components in an Expeditionary Environment

Quantification of Residual Stress in Directed Energy Deposition Additive Manufacturing via Bridge Method

Quasistatic Energy Absorption in Aperiodic Cellular Materials

Rapid Foam Foundry: The Future of Foam Foundry

Real-time Image-based Quality Control for Bio-additive Manufacturing through Layer-by-layer Analysis

Real-time Melt Pool Characterization in Laser Powder Bed Fusion Using Acoustic and Photodiode Monitoring

Real-time Monitoring of Directed Energy Deposition Additive Manufacturing Process Using Multiple Sensors and Machine Learning

Real Time Quantification of Shear-induced Molecular Ordering in Direct Write Printing of Bottlebrush Based Polymer Networks

Residual Stress Analysis of Laser Powder Blown Inconel 718 Across Different Overhang Angles and Laser Outputs

Residual Stress Estimation in a Complex Additively Manufactured Component with an Internal State Variable Material Model

Resource Efficiency of the Robot-based Hybrid Additive Manufacturing Chain

Revealing and Controlling Process Instabilities for Defect Lean Metal Additive Manufacturing

Robot-aided selective embedding of a spatially steered fiber in polymer composite parts made using vat photopolymerization

Robotic Automation for Depowdering in Binder Jet Additive Manufacturing

Robotic Wire-fed Additive Manufacturing for Forging Industry.

Role of In-situ Monitoring Technique for Digital Twin Development using Direct Energy Deposition: Melt Pool Dynamics and Thermal Distribution

Self-heating Tooling on BAAM using Co-extruded Heating Wires

Self-repair of Defects: The Achilles Heel for In-process Detection of Small Pores?

Side on Plasma Emission Spectroscopy of TiAl6V4 During Laser Scanning

Simulation Based Optimization for High Frequency Piezo-actuated Molten Metal Droplet Jetting

Simulation of Anisotropic Mechanical Behavior of Additively Manufactured Ti-6Al-4V Wall Structures using VPSC

Single Path Generation for Closed Contours via Graph Theory and Topological Hierarchy

Slurry-based Binder Jetting of Ceramic Casting Cores

SmartScan Extension: Enhancing Temperature Uniformity in 3D Laser Powder Bed Fusion Additive Manufacturing for Reduced Part Defects and Distortions

Solid-state Production of Uniform Metal Powders for Additive Manufacturing by Ultrasonic Vibration Machining

Solidification Behavior, Texture Evolution, and Mechanical Behavior of Large Scale Fusion Additively Manufactured Steels: Interplay Between Chemistry and Unique Processing Conditions

Spreading and Packing of Ceramic Powder Using a Displacement-controlled Roller in SLFS

State-of-the-art Cyber-enabled Physical and Digital Systems Deployed in Distributed Digital Factory Using Additive and Subtractive Manufacturing Systems: Open, Scalable, and Secure Framework

Static Mixing Nozzles for Long and Short Fiber Additive Extrusion Processes

Stimuli Driven Morphing of Printed Liquid Crystal Elastomers

Streaming in Additive Manufacturing: Analyzing the Impact on the Powder Bed Fusion of Metals Process Chain

Strength Enhancement of cellular structures through selective reinforcement of elements based on analytical modeling

Strengthening FFF Parts via Annealing with Structured Dual Material Filaments and Dissolvable High-temperature Shells

Structural Analysis and Design of Mantis Shrimp-inspired Composites for Enhanced Impact Resistance

Structural Stability During Thermal Post-curing of Direct Ink Write Thermoset Composites

Surface Roughness Formation and Measurement for Metals Built with Laser Powder Bed Fusion

System Identification of Fused Filament Fabrication Additive Manufacturing Extrusion and Spreading Dynamics

Tailoring Anisotropic Material Properties of Hierarchical Lattice Structures through Strut Diameter and Orientation Variations: Implications for 3D-printed Ti6Al4V Lattices

Tailoring Mechanical Behaviors through Programmable Lattice Structures

Test Submission for Proceedings

Testing Protocol Development for Fracture Toughness of Parts Built with Big Area Additive Manufacturing

The Detection of Defects Caused by Reduced or Interrupted Shield Gas Flow in Laser Powder Bed Fusion

The Development of a Directed Energy Deposition (DED) Printability Framework for Improving Part Density and Performance in High Strength Martensitic Steels

The Effect of LaserSscan Strategy on Residual Stress of Titanium Alloys Using Laser Foil Printing Additive Manufacturing Processes

The Effect of Near-surface Pores on Fatigue Life of Ti-6Al-4V Components

The Effect of Thermal Conditions on Process Defects in Electron Beam Directed Energy Deposition

The Influence of Heat Treatments on the Microstructure and Tensile Properties of Additively Manufactured Inconel 939

The Use of Laser Preheating for Microstructural Customization of Ti6Al4V Processed Using Diode Point Melting System

The Variation of Mechanical Properties of M300 Maraging Steel Manufactured with Varying Process Parameters in Laser Powder Bed Fusion

The WAAM Number: A Dimensionless Number for Predicting Wire Arc Additive Manufacturing Bead Geometry

Thermal Imaging for Wire Arc Additive Manufacturing Using an Off-the-shelf Color Camera

Thermal Monitoring and Cure Process Modelling of Dual-wavelength VPP Printing

Thermal Simulation of the Material Extrusion Process with Different Print Bed Boundary Conditions

Thermal Stress Prediction in in Laser Powder Bed Fusion

Thermomechanical Modeling and Fabrication of Tungsten Carbide-nickel Geometries Through Laser Powder Bed Fusion

Thin Strand Printing of Silicone Ink with Direct Ink Write Process

Thin Wall Manufacturing in Laser Powder Bed Fusion for Heat Exchanger Applications

Time-optimal Path Planning for Heterogeneous Robots in Swarm Manufacturing

Time-resolved Optical Spectroscopy in Metal Powder Bed Fusion

Toolpath Planning Approach for Parts with Multiple Revolving Features for Wire Arc Additive Manufacturing.

Topology Optimization of Continuous Fiber-reinforced Composites Considering Manufacturing Constraints

Toward Post-superficial Temperature Monitoring During Additive Manufacturing through Data-driven Inpainting

Toward Voxel Level Control for Laser Powder Bed Fusion Additive Manufacturing Process

Towards a FAIR Knowledge Management System for Additive Manufacturing

Towards a Generic Deposition Model in Wire-arc Directed Energy Deposition: A Deep Learning-based Wetted Area Prediction Model

Towards Experimental Process Parameter Development for Ti-6Al-4V TPMS Lattice Structures with Application to Small Scale Dental Implants using Micrographs

Towards Functionally Graded Materials Using Wire-arc Technology

Towards High-throughput Assessment of Printability in Refractory Alloys Systems for Laser-powder Bed Fusion

Towards Large-scale Grain Growth Modeling in Powder Bed Fusion

Towards Large-scale Grain Growth Modeling in Powder Bed Fusion

Towards the Limits in Copper Lattice Production via Fiber Laser Powder Bed Fusion

Transmitting G-Code with Geometry Commands for Extrusion Additive Manufacturing

Two-color Thermal Imaging of WC-Ni Cermet Melt Pools in Laser Powder Bed Fusion

Ultrasonic Non-destructive Characterization of Anisotropic Additively Manufactured Polymers

Uncovering Fundamental Process Deficiencies in Wire-laser Directed Energy Deposition using In-situ High Speed Imaging

Understand Powder Deposition Behaviors of a Novel Electrostatic Powder Spreading Technique Using Particle Dynamics Simulation

Uniaxial Fatigue Behavior and Life Prediction of Additively Manufactured Inconel 718 with Different Grain Morphology

Unveiling Melt Pool Defect Signatures with Interpretable Machine Learning

Unweaving the Macrostructure of the Venus Flower Basket: From Bio-morphism to Biological Insight

Usage of Unconventional Data Sources for Market Intelligence (MI) in the Field of Additive Manufacturing (AM) - Expert Networks, Technology Territories and Trends

Use of a Vibrating Build Platform during Powder-bed Fusion of Metals Using a Laser Beam

Using In-situ Two-color Thermal Imaging to Validate Multi-physics CFD Melt Pool Models for LPBF

Variational Autoencoders for Comprehensive Feature Identification in Fatigue Analysis

Virtual Inspection of Advanced Manufacturing via Digital Twins

Volumetric Additive Manufacturing of Glass

Voxel-free Radon Transform for Improving Surface Quality in Computed Axial Lithography

Wide-field Low-coherence Interferometry for Keyhole Depth Measurements in Laser Powder Bed Fusion

Wire Arc Additive Manufacturing in Steel Foundries

Wire + Arc Additive Manufacturing of Cryogenic Liquid Hydrogen Storage Tank Demonstrator

X-ray Computed Tomographic Study of Density Gradients within Binder Jet Printed H-13 Components

X-Ray Computed Tomography: A Game-Changer for Parameter Control in Additive Manufacturing

You Must Unlearn What You Have Learned: Establishing a DfAM Mindset in the Face of Centuries of Traditional Manufacturing

Questions about ProgramMaster? Contact programming@programmaster.org