About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Developments in Advanced Nuclear Structural Materials
|
| Presentation Title |
Understanding the Plastic Deformation Behavior of PM-HIP Manufactured FeCrAl Alloys
|
| Author(s) |
Ronit Roy, Khaled Eltoukhy, Zijun Su, Caleb Massey, David Hoelzer, Edwin Garcia, Maria Okuniewski, Janelle Wharry |
| On-Site Speaker (Planned) |
Ronit Roy |
| Abstract Scope |
The objective of this study is to understand the plastic deformation behavior of FeCrAl alloys manufactured via powder metallurgy hot isostatic pressing (PM-HIP) technique. In this work, gas-atomized Fe-10Cr-6.1Al powders are used to fabricate test alloys. The evolution of PM-HIP microstructure has been investigated after 1 and 3 hours of consolidation. Furthermore, uniaxial tensile tests are conducted at room temperature to investigate mechanical behavior. The plastic deformation characteristics are correlated with the HIP-induced microstructures to understand the plastic deformation behavior of PM-HIP FeCrAl alloys. Results indicate that the 1-hour PM-HIP specimens exhibit a typical brittle failure phenomenon with minimal plasticity, with cracks propagating along PPBs under tensile loading. Whereas 3-hour PM-HIP specimens exhibit significant plastic deformation prior to failure. Interestingly, despite necking in the 3-hour PM-HIP specimens, failure is governed by cracking along PPBs. This suggests that failure is driven by strain accumulation/dislocation activity at the PPBs under tensile loading. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Nuclear Materials, High-Temperature Materials, Mechanical Properties |