About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Atomization & Powder Metallurgy for Advanced Applications: An MPMD Symposium Honoring Iver Anderson
|
| Presentation Title |
Synchrotron XRD Investigation of Cooling Rate Effects on Phase Evolution and Properties of PM-HIP 25Cr Duplex Stainless Steel |
| Author(s) |
Tomas Berglund |
| On-Site Speaker (Planned) |
Tomas Berglund |
| Abstract Scope |
The influence of cooling rate on the microstructure and properties of Powder Metallurgy Hot Isostatically Pressed (PM-HIP) 25Cr Duplex Stainless Steel (SDSS) was investigated. A component with varying section thickness was solution treated and water quenched, producing different cooling rates at the part center. Cooling rates were correlated with phase composition, determined by synchrotron X-ray diffraction (XRD), including ferrite-austenite balance and sigma (σ) phase content. Mechanical properties and ASTM G48 corrosion resistance were evaluated as a function of cooling rate. Results showed that slower cooling rates promoted σ phase formation, while the ferrite-austenite balance remained relatively stable. Strength and hardness were only marginally affected, whereas impact toughness decreased sharply once the σ phase content exceeded a critical threshold. Corrosion performance remained acceptable over a range of σ phase contents. The results demonstrate that impact toughness is the most sensitive indicator of detrimental σ phase formation and establish cooling rate requirements. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Other, Powder Materials, Mechanical Properties |