About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Developments in Advanced Nuclear Structural Materials
|
| Presentation Title |
Solid-State Manufacturing of Cu-Containing High-Entropy Alloy Fuel Cladding Tubes with Controlled Cu-Rich Precipitation |
| Author(s) |
Isabella J. Van Rooyen, Subhashish Meher, David Garcia, Mohan Sai Kiran Kumar Yadav Nartu, Venkata Bhuvaneswari Vukkum |
| On-Site Speaker (Planned) |
Isabella J. Van Rooyen |
| Abstract Scope |
Advanced reactor fuel cladding requires scalable, low-energy processing routes for radiation-tolerant alloys. This work demonstrates solid-state manufacturing of Cu-containing high-entropy alloy tubes using Shear Assisted Processing and Extrusion (ShAPE). Thin-walled cladding tubes were progressively fabricated from cast-and-homogenized billets with diameters of 10, 7, and 5 mm, establishing key processing knowledge related to tooling durability, material flow, and dimensional stability. Lanthanated tungsten mandrels exhibited superior durability compared with tungsten carbide tooling. Severe plastic deformation during ShAPE produced refined, chemically homogeneous microstructures with elevated hardness and dense dislocation/subgrain networks. Subsequent annealing enabled defect-mediated Cu precipitation: atom probe tomography showed that 500°C/10 h promoted nanoscale Cu clustering, whereas 800°C/100 h produced fine, near-pure Cu precipitates with higher sink density than as-cast material. These processing-controlled precipitates may act as defect sinks to mitigate irradiation damage, supporting customizable HEA cladding for fast reactor applications. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
High-Entropy Alloys, Nuclear Materials, High-Temperature Materials |