About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Developments in Advanced Nuclear Structural Materials
|
| Presentation Title |
Evolution of Oxide Nanoparticles in 14YWT ODS Master Feedstock for Liquid-Metallurgy Processing of ODS Steel |
| Author(s) |
Anish Ranjan, Xingshuo Zhang, Ertugrul Demir, Seung Min Ha, Alexander Killips, Sohail Shah, Mukesh Bachhav, Eda Aydogan, Xiaochun Li, Enrique Lavernia, Haiming Wen |
| On-Site Speaker (Planned) |
Anish Ranjan |
| Abstract Scope |
Liquid metallurgy-based processing has the potential to substantially reduce the processing cost of 14YWT oxide dispersion-strengthened steel. In this study, an Fe-14Cr-3W-3.12Ti-6.67Y2O3 (wt.%) master feedstock was prepared via ball milling for varying durations, then thermally aged at different temperatures to promote oxide nanoparticle precipitation, prior to dispersion into molten steel to achieve the nominal 14YWT composition. Different characterization techniques were employed to elucidate the precipitation mechanisms of oxide nanoparticles. The evolution of oxide nanoparticles was systematically investigated to identify processing conditions that maximize their number density and minimize their sizes. The 20-hour ball-milled specimen, aged at 1100 °C for 4 hours, exhibited a high oxide-nanoprecipitate number density of 2.32 × 1022 m-3, with an average size of 8.5 nm. In contrast, the 50-hour ball-milled specimen aged at 1100 °C for 4 hours exhibited substantial precipitate coarsening (size~300-nm) and a significantly reduced number density. Further optimization of processing parameters is underway. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Characterization, Iron and Steel, High-Temperature Materials |