Conference Logo ProgramMaster Logo
Conference Tools for 2026 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools

About this Abstract

Meeting 2026 TMS Annual Meeting & Exhibition
Symposium Advances in Materials Deposition by Cold Spray and Related Technologies III
Presentation Title Investigation of jet structure from microparticle impacts at extreme strain rates
Author(s) Hyein Na, Christopher Schuh
On-Site Speaker (Planned) Hyein Na
Abstract Scope A notable phenomenon observed during microparticle impacts such are common in cold spray, is jetting: material from either the particle or the substrate is ejected around the periphery of the impact interface, forming a characteristic jet-shaped residue. Despite its crucial role in bonding, the detailed geometric structure and nature of jets that form upon impact are still not well understood due to limited direct study. In this work, we employ the laser-induced particle impact test (LIPIT) to systematically produce jets at known velocities, and then explore those jet structures with microscopy techniques. We focus on the gradual development of the jet structure and the use of new modes of sample preparation and examination at the fine scales of the jets. Such observations provide new insights into its characteristics.
Proceedings Inclusion? Planned:
Keywords Additive Manufacturing, Characterization,

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Comparison of Plasma Arc Treatment and Furnace Annealing for Restoring Ductility in Cold-Sprayed Copper Deposits
An overview of residual stresses in cold spray additive manufacturing
Cold Spray Additive Manufacturing: Resetting the Corrosion Clock for Aircraft Parts
Cold Spray Deposition of Conductive Graphene Nanoplatelet Films for High-Performance Flexible Sensors
Cold spray deposition of Metal-Ceramic Coatings for Enhanced Wear Resistance
Cold Spray Digital Manufacturing Using Continuous3D
Crystal Structure–Driven Plastic Deformation in Ceramics During Cold Spray Processing
Development of Cold Spray Coatings for Enhanced Performance Fuel Cladding in Light Water Reactors
Engineered interfacial melting in high-velocity microparticle impacts: A pathway to defect-free bonding of dissimilar materials
Enhancing Corrosion and Wear Properties of Cold Sprayed Scalmalloy via Heat Treatment
Evaluation of Cold Sprayability across the Al-Zn-Mg-Cu Quaternary System
High Fidelity Deposition Modeling for Optimized Cold Spray Additive Manufacturing
High Temperature Nanoindentation and Microstructural Annealing of Cold Sprayed CoCrFeNiMo0.5 High Entropy Alloy Coating.
Hot Topics in Cold Spray Processing
Improve Particle Deposition Efficiency in Low-Pressure Cold Spray Systems
Insights on Cold Spray Additive Manufacturing: Results from Testing and Heat Treatment
Investigation of jet structure from microparticle impacts at extreme strain rates
Linking Single Impacts to Cold Spray Coatings: 3D Investigation of Bonding and Microstructure
Oil and Gas Pipelines Repair by High Pressure Cold Spray Technology
Performance Improvement of Cold-Sprayed PEEK/BNNP Nanocomposite Coatings over Pure PEEK for High-Temperature and Structural Applications
Properties of Materials Produced Through Cold Spray Advanced Manufacturing With Varying Gas Composition and Secondary Processing
Quantitative assessment of critical metrics of cold-spray using a peridynamics-based numerical framework incorporating adhesion
Single Particle Impact: From Processing Science of Cold Spray to Micromechanics of Impact-Induced Bonded Interfaces
Solid-state bulk stable nanocrystalline alloy design: inverse Hall-Petch effect promotes plasticity and consolidation of nanocrystalline microparticles
The Influence of Heat Treatment on the Strength of Single Microparticle Impact-Induced Bonded Interfaces
Toward understanding the effect of gas atomization process on powders for cold spray manufacturing through in-situ micromechanical testing

Questions about ProgramMaster? Contact programming@programmaster.org | TMS Privacy Policy | Accessibility Statement