About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Developments in Advanced Nuclear Structural Materials
|
| Presentation Title |
Transgranular Stress Corrosion Cracking in Proton-Irradiated Microstructure-Engineered Austenitic Stainless Steels in PWR Environments |
| Author(s) |
Abdullah S. Sinjlawi, Stephen S. Raiman, Michael Trombetta |
| On-Site Speaker (Planned) |
Abdullah S. Sinjlawi |
| Abstract Scope |
As part of ongoing efforts to mitigate irradiation-assisted stress corrosion cracking (IASCC) in pressurized water (PWR) reactor environments, powder-metallurgy austenitic stainless steels are emerging as promising alternatives for conventional alloys used in reactor core internals. In this study, Type 304 oxide-dispersion-strengthened (ODS) stainless steel fabricated by spark plasma sintering and ultra-fine-grained (UFG) stainless steel produced by equal channel angular pressing were proton-irradiated to 5 dpa and tested using four-point bend loading in simulated PWR environment at 320 °C. Both alloys exhibited improved resistance to cracking below the yield strength (YS), with no evidence of dislocation channels or oxidized grain boundaries typically associated with IASCC initiation. At the YS, however, mixed intergranular and transgranular cracking was observed, indicating a transition to highly susceptible cracking conditions. Manganese sulfide-, manganese-chromium-oxide-, and surface silicon-oxide-rich particles were identified as primary crack initiation sites. These results provide insight for developing engineered microstructures with enhanced IASCC resistance |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Nuclear Materials, Powder Materials, Environmental Effects |