| Abstract Scope |
Undoped and Mn-doped ZnS thin films (0, 0.5, 1.5, 3.0 and 5.0 at.% Mn) were grown on glass substrates by pulsed laser deposition (PLD) using a Nd:YAG laser (532 nm, 700 mJ pulse energy) at a substrate temperature of 400 °C and a working pressure of 10⁻³ Torr, in order to investigate the effect of Mn incorporation on the linear optical properties of ZnS. UV–Vis transmittance measurements show that the average transmittance in the visible–near-infrared plateau decreases monotonically from about 82% for undoped ZnS to 58% for the 5.0 at.% Mn film, together with a progressive red-shift of the fundamental absorption edge. Tauc-plot analysis of the (αhν)² versus hν curves reveals that the direct optical band gap narrows continuously from 3.60 eV (undoped ZnS) to 3.42, 3.30, 3.18 and 3.05 eV for 0.5, 1.5, 3.0 and 5.0 at.% Mn, respectively an overall reduction of 0.55 eV that is attributed to sp–d exchange interaction between the ZnS band electrons and the localized Mn²⁺ 3d electrons together with an increasing density of Mn-related localized states inside the gap. Consistently, the extinction coefficient, the absorption-edge coefficient and the imaginary part of the dielectric constant increase steadily with Mn content, while the refractive index and the real part of the dielectric constant decrease, reflecting the enhanced defect-related optical absorption introduced by the dopant. These results establish Mn incorporation by PLD as an efficient and controllable route to tailor simultaneously the band gap and the linear optical constants of ZnS thin films, which is of direct relevance for band-gap-engineered optoelectronic and photonic devices. |