Additive Manufacturing and Characterization of A709 Stainless Steels for Nuclear Applications

Characterization of build parameters and microstructure in low heat input WA-DED of Ni-based superalloy Haynes 282

Characterization of Process-Induced Cracks and Their Closure by Hot Isostatic Pressing in Laser Powder Bed Fusion AA-7075

Creep Behavior of Stainless Steel 316L manufactured by Laser Powder Bed Fusion

Directed energy deposition of modified PH 13-8 Mo powder: Microstructure and Tensile Properties

Effect of hot isostatic pressing and solution treatment on recrystallisation of Haynes 282 built with Laser Powder Bed Fusion

Effect of Hot Strength of Aluminium-Magnesium Binaries on Additive Friction Stir Deposition Performance

Effect of In-Situ Laser Remelting on Microstructural Evolution and Anisotropy in SS316L from Laser Directed Energy Deposition

Effect of Number of Wires in Microstructure and Mechanical Properties of Wire Arc Additive Manufactured Components

Electroplated Laser-Powder Bed Fusion and Bound Powder Extrusion Additive Manufactured 17-4 Stainless Steel

Enhanced properties of SS316 manufactured using DirectEnergy Deposition

Enhancement of tensile properties and isotropy of wire arc additive manufactured alloy 625 via thermomechanical process

Enhancing Creep Resistance of AM Superalloys through Inter-layer Mechanical Working

Evaluation of localized creep deformation and interface characteristics of innovative P91&304H graded composite transition joint

Fatigue life evaluation of Binder Jet Printed and Sintered Metal Components

Hot Deformation Behavior of Additively Manufactured Ti-6Al-4V

Identifying and Manipulating Microstructures of W-DED Components through Custom-Post-Process Heat Treatments and In-Situ Processing

In situ Laser TEM and SEM Study of Austenitic Steel Solidification

In situ synchrotron diffraction study of ultra-fine microstructure formation during directed energy deposition additive manufacturing of a high-performance Al alloy

Investigation of Creep Performance of Additively Manufactured Type 316 Stainless Steels

Investigation of M2 Tool Steel Fabricated by Selective Laser Melting Compared to Binder Jetting: Microstructural, Mechanical, and Tribological Insights

Location-specific microstructures and properties of Haynes 282 alloy with laser-wire direct energy deposition processing

Mechanical and Micro-structural Characterization of Continuous Fiber Reinforced 3D Printed Composite via Finite Element Analysis

Mechanical property retention of additively manufactured Al-Ce-Mo alloy after high temperature exposure

Microstructural and mechanical analysis of high strength steel thin walls produced by wire arc additive manufacturing

Microstructural features of additively manufactured 420 stainless steel after isothermal deformation below the Ae1 temperature

Microstructure Evolution and Creep Property of Laser Powder Bed Fused Hypereutectic Al-16Ce-1Mg Alloy

Microstructure evolution and Mechanical Properties of Ti6Al4V Processed Below β-Transus Temperature using Additive Friction Stir Deposition

Microstructure & Porosity Analysis in Forced-Cooled WAAMED Al-Mg Alloys

Minimizing directional anisotropy through point melt scanning strategies for IN718 bulk parts- fabricated via EB-PBF

Ni-based superalloy MAR-M247 fabricated by electron-beam powder-bed fusion (E-PBF): effect of pre-heating on printability and microstructure-property relationship

Nonlinear Grading Approach for Ferritic P91 and Austenitic 347H Steels Joints Produced with Laser-Directed Energy Deposition Method

Optimization of Processing Conditions of a High-Strength, Additively Manufactured Aluminum Alloy for IR Mirror Applications

Performance Assessment of YTiO-Enhanced 316L Stainless Steel Nanocomposites Fabricated by Laser Directed Energy Deposition

Phase Evolution and Mechanical Performance of Additively Manufactured HT9 Ferritic-Martensitic Steel

Printability and mechanical response of high-strength electrically conductive Al-Ni-Zr(-Sn) alloys fabricated via laser powder bed fusion

Relation in Micro-structure and surface properties and mechanical properties in Additive manufacturing TI-6Al4V: Challenges in repeatability and reproducibility.

Temperature-Dependent Fracture Behavior of Laser Powder Bed Fusion SUS316L: Charpy Impact and Tensile Testing

The effects of secondary elements on the creep and fracture behavior of additively manufactured nickel-based superalloys

The influence of part temperature on defects and in situ phase precipitation during LPBF fabrication of Alloy 718

Ti-6Al-4V L-PBF Lattices Compression Testing

Questions about ProgramMaster? Contact programming@programmaster.org