About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Developments in Advanced Nuclear Structural Materials
|
| Presentation Title |
Microstructure and Mechanical Properties of Oxide Dispersion Strengthened alloys under neutron irradiation in the HFIR |
| Author(s) |
Elizabeth M. Getto, Caleb Massey, Stephen Taller, David Hoelzer |
| On-Site Speaker (Planned) |
Elizabeth M. Getto |
| Abstract Scope |
Accident tolerant fuel applications in light water reactors and new applications for advanced reactors and small modular reactor require tolerance of elevated temperatures and high displacement damage. Oxide dispersion strengthened (ODS) alloys are designed to form nano-clusters and nano-oxides to provide elevated temperature creep strength and radiation tolerance. Two ODS ferritic alloys, “legacy” 14YWT and OFRAC, were irradiated in the High Flux Isotope Reactor up to ~16 dpa at temperatures of approximately 324 °C, 406 °C, and 501 °C. OFRAC retained its yield stress, ultimate tensile stress and ductility whereas 14YWT experienced hardening at 324 °C and some loss of ductility. Dislocations, precipitates, cavities, and grain sizes were characterized using scanning/transmission electron microscopy, electron energy loss spectroscopy, and energy-dispersive X-ray spectroscopy. Radiation induced Cr clusters, likely alpha prime, were found at the lower irradiation temperature while pre-existing carbonitrides incorporated transmutation produced elements with other stable Y/Ti rich phases. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Nuclear Materials, Characterization, Iron and Steel |