About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Developments in Advanced Nuclear Structural Materials
|
| Presentation Title |
Direct Energy Deposition Manufacturing of Composite Cladding for Nuclear Applications |
| Author(s) |
Lauren E. Heinrich, Sebastien Dryepondt, Caleb P. Massey, Tim G. Seibert, Peeyush Nandwana |
| On-Site Speaker (Planned) |
Lauren E. Heinrich |
| Abstract Scope |
The Innovative Nuclear Materials (INM) program within the Department of Energy, Office of Nuclear Energy aims at developing next-generation fuel cladding and in-core materials. Fabrication of advanced high strength high temperature cladding requires multiple pilgering/drawing and heat treatment steps. A new approach has been developed using hybrid manufacturing i.e. printing and machining of cladding using an Okuma Multus U4000 LASER EX direct energy deposition (DED) system. Initial proof-of-concept cladding prints were performed using Gr.91 and FeCrAl powders on 316L or FeCrAl thin-walled tubes. Printing on bare or coated SiC rods was also conducted to assess the production of thin claddings on sacrificial mandrels to be chemically removed after printing. A major advantage of this new fabrication process is the obtention of unique microstructures with elongated grains perpendicular to the interface and/or in-situ formation during printing of strengthening nano precipitates. Optimization of the printing and machining strategies will be discussed. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Additive Manufacturing, Nuclear Materials, Process Technology |