About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Atomization & Powder Metallurgy for Advanced Applications: An MPMD Symposium Honoring Iver Anderson
|
| Presentation Title |
Effect of Powder Feedstock Composition and Atomization Route on the Mechanical Performance of Ni ODS Alloys |
| Author(s) |
Owen M. Bloise, Matt DeJong, Nedim Cinbiz, Peter Hosemann, Iver Anderson, Djamel Kaoumi |
| On-Site Speaker (Planned) |
Owen M. Bloise |
| Abstract Scope |
Ni based ODS alloys have several properties that make them desirable candidates for use in extreme environments, one of those environments being next generation nuclear reactors. The majority of alloys in the literature use mechanical alloying of powders before consolidation. In this study, two different Ni-Cr powder compositions with different amounts of Y and Ti were produced through Gas Atomization (GA) and Gas Atomization Reaction Synthesis (GARS) with oxygen. These powders were then consolidated through Spark Plasma Sintering (SPS) before undergoing tensile testing at 25C using SSJ2 geometry. The mechanical tests revealed that the powder production method along with the powder composition significantly affected the mechanical performance of the alloy. Transmission Electron Microscopy (TEM) was conducted on lift outs from the fractured edge and the as-processed condition to help explain the mechanical testing results in greater depth. Heat treatment effect on the microstructure and the mechanical properties is also investigated. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Powder Materials, Mechanical Properties, Characterization |