About this Abstract |
| Meeting |
2027 TMS Annual Meeting & Exhibition
|
| Symposium
|
Atomization & Powder Metallurgy for Advanced Applications: An MPMD Symposium Honoring Iver Anderson
|
| Presentation Title |
Reactive Metal Powder Feedstock in Additive Manufacturing |
| Author(s) |
Dan J. Thoma, Will Kunkel, Matthew Vigil, Charlie Adkins |
| On-Site Speaker (Planned) |
Dan J. Thoma |
| Abstract Scope |
Metal additive manufacturing (MAM) of reactive alloys is often challenged by oxidation, contamination, and volatilization losses that alter feedstock composition. This work presents process-design methodologies for controlling composition in both elemental-blend and pre-alloyed feedstocks during MAM. In directed energy deposition (DED), reduced-order energy balance models are developed to predict and control solidification rates and local thermal cycles during processing. The resulting framework is extended to laser powder bed fusion (LPBF), where process maps are employed as a design tool for tailoring solidification behavior and thermal histories. By controlling these processing conditions, microstructures and mechanical properties can be systematically tailored. Case studies involving equiatomic Fe–Ni–Cr–Mn–Co alloys, magnesium alloys, and refractory W–Ti–Cr–V elemental blends demonstrate the applicability of the approach to systems susceptible to oxidation and volatilization. Together, reduced-order models and process maps provide a framework for achieving MAM compositional control using reactive metal feedstocks. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Additive Manufacturing, Magnesium, Powder Materials |