Conference Logo ProgramMaster Logo
Conference Tools for 2027 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools

About this Abstract

Meeting 2027 TMS Annual Meeting & Exhibition
Symposium Atomization & Powder Metallurgy for Advanced Applications: An MPMD Symposium Honoring Iver Anderson
Presentation Title Additive Manufacturing of High Temperature Mo-Base Alloys
Author(s) John H. Perepezko, Longfei H. Liu, Dan H. Thoma
On-Site Speaker (Planned) John H. Perepezko
Abstract Scope In order to achieve enhanced performance at higher operating temperatures than Ni-base superalloys an alloy must be designed to satisfy several challenging requirements involving mechanical properties as well as environmental resistance at 1300℃. To address these challenges an effective design has been established based upon the undercooling and rapid solidification during additive manufacturing (AM) utilizing a reactive synthesis of component powders of Mo, Si3N4, BN, and Ti where a high throughput synthesis and characterization are employed to identify promising alloy compositions. The selected Mo-Si-B-Ti alloy includes Ti for both density reduction to 9.2 g/cm3 and to limit the Si solubility in Mo. The alloy design exhibits a high compressive strength of about 1.6 GPa and ductility above 20% at room temperature. An effective oxidation resistance is provided by a pack cementation borosilica coating. With AM and optimized processing parameters turbine blades have been produced at full scale.
Proceedings Inclusion? Planned:
Keywords Additive Manufacturing, Powder Materials, High-Temperature Materials

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Historical Look at the Effects of Atomization on Aluminum and Beryllium
A Modified 14YWT Ferritic Steel via GARS and Warm Cross-Rolling for Advanced Reactor Applications
A Parametric Study of Canning Parameters on Material Properties of PM-HIP Stainless Steel
Additive Manufacturing of High Temperature Mo-Base Alloys
Advanced Powder Metallurgy Approaches for Refractory Materials in Extreme Energy Environments
Advancements Towards Scalable and Sustainable Ultrasonic Atomization
Balancing Oxide Dispersion and Flowability in the Preparation of Inoculant-Modified Feedstock Powder
Can Ultrasound Replace Gas Atomization? Opportunities and Challenges for Scaling Ultrasonic Powder Production
Challenges in Rapid Solidification of Magnetic Alloys
Challenges of Ultrasonic Atomization
Cost-Aware Bayesian Optimization Across a CALPHAD–Atomization–LPBF Function Network for Critical Mineral-Lean Aluminum Alloy Discovery
Critical Contribution of Gas Atomization to the 3D Printing of Neutron Radiation Shield Technology for Space Electronics Protection
Design of Low-Temperature Solder Alloys for Heterogeneous Integration
Development and Evaluation of Feedstock Preparation Methods for Ultrasonic Plasma Atomization
Effect of Powder Feedstock Composition and Atomization Route on the Mechanical Performance of Ni ODS Alloys
Effects of Reusing and Refreshing Strategies of Inconel 625 Powders for the Production of Parts with Powder Bed Fusion of Metal by Laser Beam Process
Electrostatic Powder Spreading in Metal Powder Bed Fusion Additive Manufacturing Process: Experimental and Computational Approaches
In-Situ Synchrotron X-Ray Investigation of Phase Evolution in Gas Atomized Powder Enabling Manufacturing of Nanoscale Oxide-Dispersion Strengthened Ferritic Steels
Influence of Powder Metallurgy Processing on High Temperature Mechanical Properties and Oxidation Resistance of Cr-Mo-Si
Innovations in Ultrasonic Atomization for Nanogalvanic Aluminum Alloys
Magnetocaloric Materials for Gas Liquefaction
Micron-Sized Reactive Aluminum Alloy Powders via Ultrasonic Atomization, Alloy Design, and Post-Processing
Microstructural Characterization of Aluminum Alloy Powders Produced Via Ultrasonic Atomization
Microstructure and Mechanical Property Evaluation of Al-Ce-Cu-Ni Powder for Cold Spray Applications
Morphology-Preserving Oxide Dispersion Strengthened (ODS) Tungsten Feedstocks Via Resonant Acoustic Mixing for Additive Manufacturing
Optimizing Ultrasonic Atomization Parameters for Supply-Chain-Resilient Aluminum Powders in Laser Powder Bed Fusion
Powder Metallurgy/Hot Isostatic Pressing (PM/HIP) Consolidation of Nanostructured Bainitic Steels
Process Improvement of Electrode Induction Gas Atomization by Multi-Physics Modeling
Processing-Driven Phase Stability and Mechanical and Magnetic Properties in Fe67Cr11Co11Ni11: High-Pressure Torsion vs Friction Stir Consolidation
Reactive Metal Powder Feedstock in Additive Manufacturing
Scalable Severe Plastic Deformation (SPD) with Friction-Based Methods for Oxide Dispersion Strengthened (ODS) Alloys
Synchrotron XRD Investigation of Cooling Rate Effects on Phase Evolution and Properties of PM-HIP 25Cr Duplex Stainless Steel
The Effect of Ultrasonic Atomization on the Particle Size and Chemical Purity of Refractory and Noble Metals
The Making and Shaping of Metal Powders
Theory and Research in Atomization vs. Application

Questions about ProgramMaster? Contact programming@programmaster.org | TMS Privacy Policy | Accessibility Statement