ProgramMaster Logo
Conference Tools for 2014 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2014 TMS Annual Meeting & Exhibition
Symposium Ultrafine Grained Materials VIII
Sponsorship TMS Structural Materials Division
TMS/ASM: Mechanical Behavior of Materials Committee
Organizer(s) Suveen Nigel Mathaudhu, University of California, Riverside
Yuri Estrin, Monash University
Zenji Horita, Kyushu University
Enrique Lavernia, University of California, Davis
Xiaozhou Liao, The University of Sydney
Lei Lu, Institute for Materials Research
Qiuming Wei, University of North Carolina, Charlotte
Gerhard Wilde, University of Muenster
Yuntian Zhu, North Carolina State University
Scope This is the eighth international symposium that focuses on all aspects of science and technology of ultrafine grained (UFG) and nanocrystalline materials. This symposium covers a broad scope, ranging from fundamental science to applications of bulk ultrafine-grained (grain size <1000 nm) and nanostructured (feature size <100 nm) materials.

In addition to the general sessions, a number of specialized topical session in key developing areas of nano materials science will be planned. **NOTE: If you are interested in presenting in one of these sessions, please indicate this in the "Note to Organizing Official" block during abstract submission** These include:

- Gradient and Layered Nanostructures (Invited Speakers Only)
- Stability of Nanostructured Materials
- Powder Processing of Bulk Nanostructured Materials
- Bio-Inspired Nanomaterials

Awards: UFG VIII will be hosting a Young Scientist Session for students or post-docs within three years of receiving their Ph.D. There will be up to two Gold Medals and three Silver Medals for best oral presentation. Awards will also be given for best poster (One Gold Medal and two Silver Medals). A committee that includes the symposium organizers and invited speakers will decide the awards. Each medalist will receive a certificate, and may receive a cash prize, depending on resources available. ** NOTE: If you would like to be considered for the Young Scientist Session, please indicate this in the "Note to Organizing Official" during abstract submission.
Abstracts Due 07/15/2013
Proceedings Plan Planned: Publication Outside of TMS
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

An Examination of the Flow Patterns Developed on Disc Lower Surfaces under Different Anvil Misalignments in High-pressure Torsion
Application of High-pressure Torsion to Al-6%Cu-0.4%Zr for Ultrafine-grain Refinement and Superplasticity
Application of High-pressure Torsion to TiFe Hydrogen Storage Material: No Requirement for Activation
Assessing Hydrogen Embrittlement Susceptibility of Nanocrystalline Materials
B58: Application of High-pressure Torsion to ZnO
B59: Corrosion Resistance of the Hydrated Film on Ultrafine-grained Mg Alloy Prepared by Hydrothermal Method
B60: Direct Micro-strain Observation of a Trimodal Al-Mg Alloy Using Digital Image Correlation Technique
B61: Extension of the Classical Thermodynamic/Kinetic Model to Predict Strain Induced Precipitation in an Ultrafine-grained Al-Cu-Sc Alloy
B62: Microstructure and Mechanical Properties of Novel CuNb Alloys Prepared by Ball Milling and High Pressure Torsion
B63: Twin Intersection Mechanisms in Nanocrystalline FCC Metals
B64: Ultrafine Grained Zircaloy-2: Processing, Microstructure and Mechanical Behaviour
B65: Aging Behavior of Ultrafine Grained Al 6061- TiB2 Alloy Composite Processed through Cryorolling
B66: Bulk Ultrafine Structured Al-7wt%Si-0.3wt%Mg Alloys Synthesized by High Energy Ball Milling in Combination with Hot Mechanical Consolidation
B67: Cold Spray Processing of Nanocrystalline AA5083 Al Powder
B68: Development of High Strength Al 7075 Alloy through Cryorolling Followed by Warm Rolling
B69: Dry Sliding Wear Behavior of Al 6061- 3% TiB2 In Situ Alloy Composite Processed through Cryorolling
B70: Effect of Aging and Multidirectional Forging on Microstructure and Mechanical Properties of Al-Mg-Si Alloy
B72: Enhancement of Mechanical Properties of Biocompatible Ti-45Nb Alloy by Hydrostatic Extrusion
B73: Exceptionally High Strength, Nanocrystalline Mg AZ31 Alloy Produced by Cryomilling and SPS
B74: Heterogeneous Dislocation Process, Slip Transfer and Shear Band Formation in the Deformation of Nanotwinned Copper by Molecular Dynamics Simulation
B76: Microstructural Changes and Damage Evolution in Ultrafine-grained Copper Microcantilevers during Cyclic Deformation
B77: Microstructural Evolution in Composite Layered Al 6061 Alloy Processed through Cryorolling
B78: The Study of Crystal Orientation Changes during the High Pressure Torsion Process by Crystal Plasticity Finite Element Simulations
B79: Through-process Modeling of Al Alloy Optimization for Cold Spray Processing
B80: Fatigue Crack Growth Investigations on Ultrafine-grained Metals Produced by High Pressure Torsion
B81: Error Propagation in Deformation Parameter Measurement
B82: Microstructure and Texture Evolution in Low-carbon Steel Deformed by Differential Speed Rolling Method
Breakdown of Hall-Petch Strengthening for UFG Metals at Elevated Temperatures
Bulk Consolidation of Nanostructured Cu-Ta Alloys
CAPAD Processing of Nanostructured Rare Earth Doped Zirconia for High Temperature Light Emission Applications
Corrosion Behavior of Multiaxially Forged Ultrafine Grained 316L Stainless Steel
Creep Behavior of Particle Reinforced Aluminum Processed by Accumulative Roll Bonding
Creep in Ultrafine-grained Materials after Pressurization Treatment
Cu/Nb Nanocomposite Metallic Wires Processed by Severe Plastic Deformation: Effects of the Nanostructure on the Resistance to Extreme Environment (High Strain, High Stress, High Temperature)
Deformation and Fracture Mechanisms in Gradient Nano-grained Metals
Deformation Behavior of Laminates and Bimodal Ultrafine Grained Microstructures
Deformation Behavior of ZK60 Magnesium Alloy Processed by High-pressure Torsion at Elevated Temperatures
Deformation of Accumulative Roll Bonded Bulk Copper-Niobium Nanolaminates by Kink Band Formation
Development of Microstructural and Hardness Homogeneity in Metals Processed by High-pressure Torsion
Dislocation Hardening Versus Softening: Size Effect
Dynamic Phase Transformation and Nonlinear Elasticity Phenomena in an Ultra-fine-grained TiNbTaZr Alloy
ECAP-conform as an Advanced Technique to Produce Ultrafine-grained Metals
Effect of Boundary Character on the Strength and Ductility of Ultrafine-grained Al-Zn alloy
Effect of Diamantane Nanoparticles on the Thermal Stability of Cryomilled 5083 Aluminum
Effect of Microstructure on Nitriding of Ultrafine-grained Titanium Processed by High-pressure Torsion
Effect of Rolling on Microstructure and Mechanical Properties of Equal-channel Angular Pressed Mg-Gd-Zn-Zr Alloy
Effect of Sample Volume on Microstructure Evolution during Severe Plastic Deformation
Effect of Strain Rate and Grain Size on the Deformation Mechanism of Ultrafine-grained Al Alloy Produced via FSP
Engineering Refined Surface Microstructures Using Severe Plastic Deformation in Large Strain Extrusion Machining
Expanding Solid-state Foaming: Intraparticle Expansion as a Means to Enhance Porosity in Metals
Fabrication of Bulk Ultra-fine Grained Magnesium Alloy via Additive Friction Stir Deposition
Fabrication of L10-Ordered FeNi Using High-pressure Torsion and Annealing
Fatigue Strength of Low Carbon Steel with Ultrafine-grained Surface Layer
Formation of Metastable Phases of Silicon Processed by High-pressure Torsion
Formation of Supersaturated Solid Solutions in Immiscible Systems by High-pressure Torsion
Formation of Ultrafine Grain Structure Ti-6Al-4V Alloy by Ultrasonic Peening
Fully Recrystallized Nanostructures in Bulk Austenitic Steels
Gradient Nanostructure and Residual Stress Induced by Ultrasonic Nano-crystal Surface Modification for High Strength and High Ductility 304 Austenitic Stainless Steel
Gradient Nanostructures in Materials
Gradient Structure: Perspective, Prospect and Problems
Grain Boundaries and Advanced Properties of Ultrafine-grained Metals
Grain Boundaries in Severely Deformed Metals: Effect of Deformation Temperature and Stacking Fault Energy
Grain Refinement and Growth in Copper Using Surface Mechanical Attrition Treatment at Cryogenic Temperatures
Grain Refinement and Mechanical Properties of Mg-3.4at%Zn Alloy Strained by High-pressure Torsion
Grain Size Gradient-induced Work Hardening and Extraordinary Ductilization
Graphite to Diamond Phase Transformation by High-pressure Torsion
Harmonic-structured Materials: Proof of Fabrication Concept Based on Severe Plastic Deformation of Powders
High-pressure Torsion for Fabrication of High-strength and High-electroconductivity Al Micro-wires
High Strain Rate Properties of Nanostructured Cu-Ta Alloys
Hollow Cone High-pressure Torsion
How Does Upscaling of the Accumulative Roll Bonding Process Affect the Homogeneity and Mechanical Properties of AA1050A
Improved Tensile and Fatigue Properties of Nanocrystalline Cu and Cu-Al Alloys
Improvement of Strength in Biomedical -Ti Alloy While Maintaining Low Young's Modulus through Severe Plastic Deformation
In Situ Micro Compression Testing of Ultra Fine Grain, Ultra High Purity Copper: A Size Effect Study
Industrial Application of Friction Stir Processing
Influence of Grain Boundary Misorientation Angle on Tensile Ductility of Ultrafine-grained Al Alloy
Influence of Length Scale on Mechanical Behavior of a Multilayered Nanocrystalline Ni-Fe
Influence of Length Scale on Precipitation in Ultrafine-grained and Nanocrystalline Al-Zn-Mg-Cu Alloys (Al 7075)
Influence of Processing Deformation Mode on UFG Al-Zn-Mg-Cu Alloy
Influence of Sc and Zr Additions on the Microstructure and Mechanical Properties of UFG Al-Mg Alloys
Influence of UFG Structure and Surface Roughness of Ti-6Al-4V on Quality of Diffusion Bonding
Insight into Microstructural Evolution during Severe Plastic Deformation Processes Gained from In Situ Microscopy
Interface Controlled Plasticity in Nanocrystalline Alloys
Interfaces by Design
Investigation of Abnormal Grain Growth Kinetics in Electrodeposited Nanostructured-nickel
Layered Structures in Deformed Metals and Alloys
Linear and Non-linear Optical Properties of Functional Transparent Oxide Ceramics via Current Activated Pressure Assisted Densification (CAPAD) and Femtosecond Laser Processing
Low Temperature Long Term Annealing of Copper Subjected to High-pressure Torsion
Low Temperature Process Optimization for Ultra-fine Grained Mg-3Al-1Zn Alloy
Maps of Microstructures Resulting from Severe Shear
Mechanical and Acoustic Properties of UFG Magnesium
Mechanical Behaviour of Ultrafine Grained Zircaloy-2
Mechanical Characterization of Electrodeposited CoNi Multilayers with a Bimodal Grain Size Distribution
Mechanical Properties and Microstructure Evolution of an Aluminum 6082 Alloy Processed by HPT
Mesoscale Modeling of Nanocrystalline Structural Evolutions under Thermal-mechanical Influences
Mg Clustering Induced by Severe Plastic Deformation in an Al-Mg Alloy
Microstructural Design of Ultrafine Grained Magnesium Alloys through Severe Thermo-mechanical Processing
Microstructural Evoluation and Superplastic Behavior in Two-phase Alloys Processed by High-pressure Torsion
Microstructural Evolution in Pure Titanium Processed by High-pressure Torsion
Microstructure and Mechanical Behavior of the Nanostructured SUS316L Steel: An Overview
Microstructure and Mechanical Properties of Bulk Ultrafine Structured Alloys and Metal Matrix Composites Alloys Synthesized by a Combination of High Energy Mechanical Milling and Thermomechanical Powder Consolidation
Microstructure and Mechanical Properties of Ultrafine Grained Ferritic Steels Processed by Spark Plasma Sintering and Hot Isostatic Pressing: A Comparative Study
Microstructure Evolution and Mechanical Properties of Ti15Mo Alloy Processed by High Pressure Torsion
Microstructure Evolution Features of FCC Metals during Equal Channel Angular Pressing and Subsequent Annealing
Microstructure Evolution of the Recycled Ti-alloys Using Equal Channel Angular Pressing (ECAP)
Microstructure Stability of Ultra-fine Grained Commercial Magnesium Alloy Processed by Severe Plastic Deformation
Microstructures and Mechanical Properties of Ultrafine Grained and Nanostructured Cu after Annealing
Modeling and Simulation of Mechanical Properties and Microstructure of SPD Nanostructured Ti-45Nb Biomaterials
Nano-structuring of 316L Austenitic Steel by High-strain rate Severe Plastic Deformation Processing
Nanocrystalline Grain Boundary Engineering Enabled by Novel Deformation Physics
Nanocrystalline NiTiPd Shape Memory Alloys
Nanocrystalline Surface Layer Enhancements through Thermo-mechanical Processed Two-dimensional Linear Plane-strain Machining of 316L Austenitic Stainless Steel
Nanoscale Deformation Behavior of Phase-reversion Induced Austenitic Stainless Steels: The Interplay between Grain Size from Nano-grain Regime to Coarse-grain Regime
Nanoscale Precipitation, Recovery and Grain Growth in ODS Steel Particles
Nanostructure Control of Age-hardenable Al-Cu Alloy by Processing High-pressure Torsion for Extra High Strength
New Insights into the Formation of Solute Nanostructures in an Al-Mg-Si Alloy during HPT Processing
Ni Based Gradient Materials
Optimization of the Fatigue Limits of Ultrafine Grained Cu-Zn Alloys
Optimizing Strength and Ductility in Cu-Al Alloy with Fine and Homogeneous Recrystallized Structure by Simple Cold Rolling and Annealing
Oxide Particle vs. Carbon Doped Nickel: Two Strategies to Stabilize Nanocrystallites
Powder-route Synthesis and Mechanical Testing of an Ultrafine Grained W Alloy
Precipitation Mechanisms Induced by Severe Plastic Deformation in Al-Cu Alloy
Precipitation Phenomena in Gas Atomized and Cryomilled Al-Fe Alloys
Precipitation Phenomena in HPT Processed 7475 Aluminium Alloy
Processing of Nanocrystalline Ceramics for Optical Applications
Processing Routes for Ultrafine Grained Magnesium MgZn1Y2 Alloy
Quantifying the Role of Grain Boundary Energetics and Texture on the Strength of Ultrafine Grained Materials
Quasi-static and Dynamic Mechanical Properties of Nanostructured Copper Doped with Tantalum
Recent Developments in Grain Refinement Modeling during severe Plastic Deformation
Reinforcement Size Dependence of Failure Mechanisms in Boron Carbide/Aluminum Matrix Composites
Stability of Nanostructured Metals at High Temperature and Against Radiation
Strain and Stress Partitioning in Ultrafine Grained Ferrite/Martensite Steel
Strain Rate and Temperature Effects on Uniaxial Deformation and Fracture of Copper with Preferentially Oriented Nanoscale Twins
Stress-driven Grain Growth during Stress-relaxation in Nanocrystalline Ni
Structure and Mechanical Properties of Nanostructured Al-0.3%Cu Alloy
Structure and Properties of the Mg-Y-Gd-Zr Alloy after High Pressure Torsion
Study of SPD Induced Lattice Defects and Their Effects to Strength before and during Annealing
Superconductivity in Bulk Ultrafine-grained Metals Prepared by High-pressure Torsion
Surface Nanocrystallization Method for the Improvement of Tribological Properties in 5XXX and 7XXX Al Alloys
Tailored Grain Size of Bulk NiTi Achieved by Deformation Induced Amorphization and Subsequent Crystallization
Tailoring Mechanical Behavior and Stress-driven Grain Growth of Nanocrystalline Thin Films via Alloying
TEM and X-ray Analysis of Cu-alloys after High Pressure Torsion
Tensile Instability of Nanostructured Al-1%Si Alloy
Texture of Hot-Pressed Copper after Twist Extrusion
The Dynamic Compressive Behavior at Elevated Temperatures of Ultrafine-grained Pure Ti Processed by ECAP
The Effect of Combined SPD Processes on Mechanical Behavior and Microstructural Properties of an Aluminum Alloy
The Fine Line between Brittleness and Toughness in Severely Plastically Deformed Metals
The Role of Copper Twin Boundaries in Cryogenic Indentation-induced Grain Growth
Thermal Stability and Microstructural Evolution in Severe Plastically Deformed Fe and Fe-Zr
Thermomechanical Processing of a Cryomilled Al-Mg Alloy
Ti/Al Laminates Produced by ARB
Transformation of Lamellar Structures during Equal Channel Angular Pressing
Transient Plastic Phenomena in Large Strain Deformation
Ultrafine-grained Aluminum Nanocomposites with Hierarchically Tailored Distribution of Boron Carbide Nanoparticles
Ultrafine Grained Al-Mg Alloys: Severe Plastic Deformation, Microstructure Evolution and Dynamic Strain Aging
Ultrafine Grained Ti-Nb Alloys for Orthopaedics
Yielding Behavior and Its Effect on Uniform Elongation in IF Steel


Questions about ProgramMaster? Contact programming@programmaster.org