ProgramMaster Logo
Conference Tools for 2021 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2021 TMS Annual Meeting & Exhibition
Symposium Aluminum Alloys, Processing and Characterization
Sponsorship TMS Light Metals Division
TMS: Aluminum Committee
Organizer(s) Dimitry G. Sediako, University of British Columbia
Scope This Aluminum Alloys, Processing and Characterization Symposium, along with Cast Shop Technology, Aluminum Reduction Technology, Electrode Technology for Aluminum Production, and Alumina and Bauxite form the Light Metals Symposium. This is an excellent opportunity to interact with experts from the Light Metals industry and academia from all over the world and get the latest update on key issues in the industry. The symposium covers all aspects of the physical and mechanical metallurgy of aluminum alloys as well as processing methods (continuous casting is covered by Cast Shop Technology), aluminum-based metal matrix composites (MMC), product development, testing, and implementation of aluminum for end applications, including transportation (automotive, aerospace, and marine), packaging, and other key product segments. You are invited to submit papers of fundamental and applied research in the following subject areas:

- Alloy Development, including Al-Sc and Al-RE alloys
- MMC Development, Fabrication, and Applications
- Microstructure Evolution and Characterization
- Defect Detection and Control
- Surface Modification and Control
- Mechanical Behavior
- Fitness for Service Testing
- Material and Process Modeling
- Processing Innovation
- Process Control and Measurements
- New Applications and Products

Note regarding publication: Authors seeking an oral presentation opportunity must submit a manuscript for the proceedings or be approved for publication in a TMS journal. Authors seeking a poster presentation are not eligible to publish in the conference proceedings.
Abstracts Due 07/20/2020
Proceedings Plan Planned: Light Metals
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

Al-Sm Alloys Under Far-from-Equilibrium Conditions
Aluminum-rare Earth Metal Matrix Composites: The Addition of Alumina Nanoparticles
Analyzes of Mechanical Properties, Microstructural Features and Correlations with Cooling Rate of Rapidly Solidified Al-x% Cu-7% Si Alloys
Comparison of Simulation and Real Life to Set Up Holistic Approach for Extrusion Process
Computational Simulation of Nanoparticle Distributions in Metal Matrix Composite Casting Processes
Development and Characterization of the Integrally Stiffened Cylinder (ISC) Process for Launch Vehicles and Aircraft Fuselage Structures
Effect of Alloying Elements on Strength Properties and Casting Properties of Corrosion Resistant Quench-free Al-Ca Alloys
Effect of Bismuth Element on Structural Properties of Direct Chill Casted 6082 Aluminum Alloy
Effect of Extrusion Process on Mechanical, Welding and Corrosion Behaviour of 6XXX Series of Aluminium Alloys
Effect of heat treatment on the microstructure and mechanical properties of LB-PBF AlSi10Mg and Scalmalloy aluminium alloys Microstructure, and Mechanical Properties
Effect of Minor Additives to Al-Zn-Mg Alloys on Welding and Corrosion Performance for Building Constructions
Effect of Sc Addition on the High Pressure Torsion Processing of AA2195 Al Alloy on the Microstructure, Texture and Mechanical Property Evolution
Effect of Thermomechanical Processing on Strengthening of the 5181 Alloy (with 0.03 %Sc) Sheets for Preservation of 40 % Improved Strength Compared with 5083
Effects of Mg and Si Additions to Novel Al-Ce based Alloys for Aerospace Applications
Effects of ultrasonic melt processing on microstructure, mechanical properties and electrical conductivity of hypereutectic Al-Si, Al-Fe and Al-Ni alloys with Zr additions
Evaluation of Microstructures and Hardness of Al-10Si-0.45Mg-0.4Sc Alloy Powders
Experimental and Numerical Examinations Regarding the Material Flow of Combined Rolling Extrusion Process
Fatigue and Failure Analysis of an Additively Manufactured Contemporary Aluminum Alloy
High-throughput Al Alloy Discovery Using Laser Additive Manufacturing
Influence of the Quench Rate and Trace Elements on 6XXX Alloys
Investigation of Weld Quality for Friction Stir Welding of Extrued 6XXX Series Aluminium Alloys
Manufacturing A206 aluminum alloy by step sand casting: effect of solidification time on mechanical and surface properties of the cast samples using experimental and simulation results
Manufacturing Thin-walled Aluminum Alloys Tubes from Powder Feedstock Using Shear Assisted Processing and Extrusion
Mechanism Behind Al/Cu Interface Reaction: The Kinetics and Diffusion of Cu in Forming Different Intermetallic Compounds
Microchemistry Evolution for 8xxx Alloys by Homogenization
Microstructural Evolution of Ultra-fine Grained (UFGs) Aluminum in Tribological Contacts
Microstructure and mechanical properties of a precipitation-hardened Al-Mn-Zr-Er alloy
Microstructure Characterization of Al-Mg Alloy Matrix Syntactic Foam by Three-dimensional Analysis
Microstructure evolution of an Al-Fe-Ni alloy with Zr and Sc additions upon different cooling rates during solidification for improving the mechanical and electrical conductivity properties
Microstructure Evolution of Cast Al-Zn-Mg-Cu-Zr (AA7068) Alloy
Microstructures and Mechanical Properties of Cold Rolled In-situ TiB2 Particulate Reinforced Al2618 Composites
Mo-enhanced Chemical Stability of TiC Nanoparticles in Molten Al
Phase formation of Mo- and Cr-rich compounds in an Al-Si cast alloy
Review of Retrogression Forming and Reaging for AA7075-T6 Sheet
Shear Assisted Processing and Extrusion of Aluminum Alloy 7075 Tubing at High Speed
Shear Assisted Processing and Extrusion of Thin-walled AA 6063 Tubing
Simulations of Wear-induced Microstructural Evolution in Nanocrystalline Aluminum
Studying the Compatibility of Anodization with Eutectic Aluminum-Cerium Alloys
The Combined Method for Producing Long Products from Aluminium and Aluminium Alloys
The corrosion behavior of 5xxx and 6xxx aluminum alloys with trace calcium
The Effect of Al3Er Particles on the Structure and Mechanical Properties of an Al-Mg Alloy
The Effect of Rare Earth Mischmetal on the High Temperature Tensile Properties of an A356 Aluminum Alloy
Thermal Analysis of the Solidification Behavior of AA7075 Containing Nanoparticles
Thermal Properties of Hybrid al-cu-Components Produced by Combining Powder Pressing and Semi-solid Forming Strategies
TIG Welding of Dissimilar High-Strength Aluminum Alloys 6061 and 7075 with Nano-treated Filler Wires
Towards Obtaining High-strength Aluminum Rivets via Friction-based Riveting Technique
Understanding the Effect of Quench Delay and Alloy Chemistry on Various 6000 Series Alloys Systems


Questions about ProgramMaster? Contact programming@programmaster.org