ProgramMaster Logo
Conference Tools for 2019 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2019 TMS Annual Meeting & Exhibition
Symposium Friction Stir Welding and Processing X
Sponsorship TMS: Shaping and Forming Committee
Organizer(s) Yuri Hovanski, Brigham Young University
Rajiv S. Mishra, University of North Texas
Yutaka S. Sato, Tohoku University
Piyush Upadhyay, Pacific Northwest National Laboratory
David P. Yan, San Jose State University
Scope This symposium is the tenth friction stir welding and processing symposium during TMS Annual Meetings. This symposium will present fundamentals and the current status of friction stir welding (FSW) and solid-state friction stir processing of materials. It will provide researchers and engineers with an opportunity to review the current status of the friction stir related processes and discuss the future possibilities. Papers are sought on all aspects of friction stir welding and processing including their various derivative technologies.

Abstracts are requested in the following general topic areas related to friction stir technologies: derivative technologies; high temperature applications, industrial applications, dissimilar alloys and/or materials, lightweight alloys, simulation, and characterization.
Abstracts Due 07/16/2018
Proceedings Plan Planned: None Selected
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

A Comparison of Dissimilar Aluminum Alloys Joined by Friction Stir Welding with Conventional and Bobbin Tools
Achieving forced mixing in Cu-based immiscible alloys via friction stir processing
Additive Friction Stir Deposition of Metals and Composites
Advances in Signal Processing for Friction Stir Welding Temperature Control
An Investigation into the Effects of Stir Zone Chemistry on Fracture Toughness in Friction Stir Welded Pipeline Grade Steel
Assessing the performance of aluminum alloy heat exchangers manufactured by Stationary Shoulder Friction Stir Channeling
Conditions for superplasticity in precipitation and strain hardened aluminium alloys before and after friction stir processing
Connecting Residual Stresses with Friction Stir Welding Conditions and Pseudo-heat Index
Copper-Graphite Composite Wire Made by Shear-Assisted Processing and Extrusion
Developing and Deploying FSW&P through Standardization
Direct application of friction stir processing to weld toes of high-strength low-alloy steel joints
Durability of friction stir welding tool at high temperature
Economics of commercialization: An industrial case study of how to resolving CAPEX and OPEX barriers
Effect of actual thermo-physical properties on heat transfer and material flow for dissimilar weld– Al 6061-T6 and AZ31
Effect of stress concentration on strength and fracture behavior of dissimilar material joints
Effect of tool eccentricity on dissimilar friction stir welding of 5052-6061 aluminum alloys
Effect of tool shape and rotational speed on the mechanical properties and microstructures of friction stir spot welding in advanced high strength steel
Effects of grain refinement on tensile properties for friction stir welds of CoCrFeMnNi high entropy alloys
Exceptional fatigue strength in cast aluminum alloy A339 modified by friction stir processing
Fatigue and Fracture of Solid-state Additive Manufacturing of Aluminum alloy 6061
Fatigue Behavior of Friction Stir Welding and Additive Friction Stir Deposition Repair Methods for Aluminum Alloys
Finite element modeling for improving tool durability and weldability in friction stir welding of high strength materials
Friction Stir Processing (FSP) of Multiwall Carbon Nanotubes and Boron Carbide Reinforced Aluminum Alloy (Al 5083) Composites
Friction Stir Spot Welding of Ti-6Al-4V Alloy Plates: Weldability, Microstructure, and Mechanical Integrity
Friction Stir Weld Behavior of Aluminum-Cerium alloys
Friction stir welding and characterization of magnesium alloy to steels
Friction stir welding of aluminum to ECO AZ31 magnesium alloy with penetration of the tool into the bottom layer
Friction stir welding of Al/C composites
Friction Stir Welding of Fibre Reinforced Titanium Composites for Aerospace Structures
Friction Stir Welding of lap joints using new Al-Li alloys for stringer-skin joints
Friction stir welding of medium Mn steel
Friction stir welding of steel with laser melting
Hierarchically microstructured magnesium WE43-B4C-Y2O3 surface composite through friction stir processing
High Speed Friction stir lap welding of Al alloys
Improved Techniques Tool Temperature Measurement, Reporting and Interpretation
Improving porous TC4/UHMWPE friction spot welding joint through controlling welding temperature and force
Influence of travel speed on microstructural features and mechanical properties of but joints friction stir welded SAF 2205 duplex stainless steel
Intermittent Flow of Material and Force Based Defect Detection during Friction Stir Welding of Aluminum Alloys
Investigation of Interfacial Diffusion during Dissimilar Friction Stir Welding
Investigation on the corrosion and wear behavior of Al6061 by friction stir processing with amorphous and crystalline states of the SiO2 nanoparticles
Joining AA7099 to Ni-Cr-Mo Steel Using Friction Stir Dovetailing
Joining of Lightweight Dissimilar Materials by Friction Self-Pierce Riveting
Joining of Magnesium to Reinforced polymers using Friction Stir interlocking
Low cost fabrication of Tungsten-Rhenium alloys for friction stir welding applications
Material flow and microstructure evolution in corner friction stir welding of 5083 Al alloy using Ad-Stir technique
Mechanical characterization of the interface obtained in friction-stir-welded joints using cohesive zone modeling
Microstructural and mechanical properties of friction stir welding of dissimilar lap joint of metallurgically immiscible CuCrZr and SS 316L
Microstructure and corrosion properties of friction stir processed aluminum alloys
Microstructure and mechanical properties of dissimilar Ti/Mg joint fabricated by friction stir welding
Microstructure and mechanical properties of the friction stir welded ultra-fine Grained CP Titanium
Modelling of the post processed tensile test in Friction stir processed of 7075 Aluminum alloy incorporated with Multiwall Carbon nanotube
Numerical model to estimate tool wear and worn-out pin shape during friction stir welding of CuCrZr alloy
On the Material Bonding Behaviors in Friction Stir Welding
Plastic flow behavior and mechanical properties in double-sided friction stir weld of advanced high strength steel sheets
Post Processed Shear Punch Test modeling of Friction Stir Processed AZ81 Magnesium Alloy incorporated with Multiwall Carbon Nanotube
Probing texture evolutions during friction stir processing of a Mg alloy: in-situ, real-time neutron diffraction study
Probing Tool Durability in Stationary Shoulder Friction Stir Welding
Process Time Reduction in Friction Stir Spot Welded EN AW 1050 and EN CW 004A Dissimilar Joints
Processing and Properties of Engineered Metal Matrix Composites Produced Via Co-Extrusion for High-Temperature Friction Stir Welding
Production of AlSi12CuNiMg/ Al2O3 Micro/Nanodispersed Surface Composites Using Friction Stir Processing for Automotive Applications.
Promising high speed welding techniques for joining polymers to metals and underlying joining mechanisms
Realization of Conventional, Stationary Shoulder and Dual Rotation FSW with an Adaptive FSW Spindle Construction
Realization of similar and dissimilar stranded wire joints via Friction Stir Spot Welding
Reduction of Process Forces during Friction Stir Welding with Varying Probe Geometries
Refill Friction Stir Spot Joining of Aerospace Aluminum Alloys with Additional Corrosion-Inhibitive Compounds
Simulation of High Speed Refill Friction Stir Spot Welding in AA 6111
Stationary shoulder friction stir processing: a low heat input grain refinement technique for magnesium alloy
Temperature monitoring and cooling rate in friction stir welding of steels
Tool shoulder end features on material flow and mechanical properties during friction stir welding of Al-Mg-Si alloy
Ultrasound Enhanced Friction Stir Welding (USE-FSW) of Hybrid Aluminum/Steel-Joints
Use of the TPM model to illuminate differences between conventional and stationary shoulder FSW
Using Spindle Speed vs Spindle Power as the Manipulated Variable for Temperature Control in Friction Stir Welding
Wear mechanism for H13 steel tool during friction stir welding of CuCrZr alloy
Welding Multilayer Materials by Refill Friction Stir Spot Welding


Questions about ProgramMaster? Contact programming@programmaster.org