ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Magnesium Technology 2020
Sponsorship TMS Light Metals Division
TMS: Magnesium Committee
Organizer(s) J. Brian Jordon, University of Alabama
Victoria M. Miller, University of Florida
Vineet V. Joshi, Pacific Northwest National Laboratory
Neale R. Neelameggham, IND LLC
Scope This symposium is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented on all aspects of magnesium technology, ranging from primary production to applications and recycling, as well as from basic research to industrialization. The symposium will cover - but is not limited to - the following topics:

Novel Extraction Techniques
Primary Production
Alloys and Their Production
ICME of Magnesium Alloys
Thermodynamics and Kinetics
Plasticity Mechanisms
Cast Products/Processing (high-pressure die casting, semi-solid processing, ...)
Wrought Products/Processing (feedstock manufacturing, rolling, extrusion, forging, ...)
Forming, Joining, Machining
Corrosion (protection) and Surface Finishing
Fatigue and Fracture
Dynamic Response
Structural Applications (automotive, aerospace, ...)
Biomedical Applications
Emerging Applications (Batteries, hydrogen storage, additive manufacturing of powders, Fracking, ..)
Recycling / Ecological issues/ Life Cycle Analysis

In keeping with the long-standing tradition of presenting the most recent and highest quality work on magnesium, this symposium features a collection of manuscripts in an edited book entitled Magnesium Technology 2020. This book features the finest and latest breaking articles in magnesium research from the past year and is listed with the main indexing services including Elsevier Engineering Index and Thomas Reuters Conference Proceedings Citation Index, as well as published as a Google eBook online, making its articles readily searchable and available on the web and citable.

A condition of delivering an oral presentation is submitting a paper for inclusion in the Magnesium Technology 2020 book. Exemptions are only permissible if:

(1) publishing in TMS journals, specifically Metallurgical and Materials Transactions A, B, or E, IMMI, JOM or other TMS sponsored journal by the same group of authors in the same year. Exemptions will only be provided to those furnishing an AUTHORS COPY of their manuscript, letter of acceptance from the editor, or similar document illustrating that the manuscript was accepted by a TMS sponsored journal by the deadline of SEPTEMBER 10, 2019.

(2) It is not required to submit a manuscript if you are planning to make a poster presentation. Therefore, you may still submit an abstract to the Magnesium Technology 2020 symposium for a poster presentation.

Please ensure your paper is submitted on time and thank you for your interest in the Magnesium Technology 2020 Symposium.

By checking “YES, I will provide a manuscript for the proceedings for making an oral presentation” under PROCEEDINGS PARTICIPATION, you are indicating that you understand that a manuscript is required to make an oral presentation and it is your intent that this manuscript be included in the 2020 Magnesium Technology book, which includes transferring the copyright of the contents of the manuscript to TMS.
Abstracts Due 07/15/2019
Proceedings Plan Planned:

A Die-cast Magnesium Alloy for Applications at Elevated Temperatures
Advanced Immersion Testing of Model Mg Alloys for Biomedical Applications
Al8Mn5 Particle Clustering on Oxide Films in Liquid AZ80 Magnesium Alloys
An Analysis of the Tensile Deformation Behavior of Commercial Die-cast Magnesium-aluminum-based Alloys
An Investigation into the Role of Dislocation Climb During Intermediate Temperature Flow of Mg Alloys
An Investigation on the Microstructure and Mechanical Properties of Hot-dip-aluminized-Q235/AZ91D Bimetallic Material Produced by Solid-liquid Compound Casting
Anomalous Hydrogen Evolution on Magnesium
Asymmetric Rolling of TZ73 Magnesium Alloy to Improve Its Ductility
CALPHAD Modeling and Microstructure Investigation of Mg-Gd-Y-Zn Alloys
Cold Formability of Extruded Magnesium Bands
Corrosion Behavior of Squeeze Cast Mg Alloy AM60-based Hybrid Nanocomposite
Deformation Driven Precipitation in Binary Magnesium Alloys
Design of Ductile Rare-earth-free Magnesium Alloys
Design of Heat Dissipating Mg–La–Zn Alloys based on Thermodynamic Calculations
Design of the Magnesium Composite with High Corrosion Resistance and High Deformability
Development of Ultra Lightweight, Corrosion Resistant Mg Alloys
Deviations from Theoretical Orientation Relationship Along Tensile Twin Boundaries in Magnesium
Effect of 2 wt % Ag Addition on Corrosion Properties of ZK40 for Biodegradable Applications
Effect of Gd and Nd Additions on the Thermo-mechanical Response of a MgMn Alloy
Effect of Second Phase Particle Size on the Recrystallized Microstructure of Mg-Al Alloys Following ECAE Processing
Effect of Temperature on Magnesium Vapor Condensation in Inert Carrier Gas
Effects of Zn Additions on the Room Temperature Formability and Strength in Mg-1.2Al-0.5Ca-0.4Mn Alloy Sheets
Experimental Investigation of Raster Tool Path Strategy for Friction Stir Processing of Magnesium Alloy
F-35 (Invited): Magnesium Industries in 2020
F-36: Analysis of Deposition Path of Solid State Additive Manufacturing of AZ31 Mg Alloy
F-37: Application of Three-phase Miscibility Gap Formation Mechanisms in Mg Alloys
F-38: Dependence of Ductility in High Pressure Die Casting AM60 Mg-alloy on Porosity
F-39: Effect of Annealing on Microstructure and Mechanical Properties of Mg-6Al Alloy Plates Processed by Differential Speed Rolling
F-40: Effect of Gradient Nanostructure on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Under High Strain Fate
F-41: Effect of Tension on Edge Crack of AZ31 Magnesium Alloys Sheets Prepared by On-line Heating Rolling
F-42: Effect of Zinc on Solidification and Aging Behaviour of Magnesium Alloys Containing Rare Earths
F-43: Effect of ZnO Nano-particle Addition and High Shear Process on Grain Refinement in the As-cast Magnesium
F-44: Fracture Toughness and Microstructural Evolution of Bulk Nanostructured ZV62 Magnesium Alloy and its Numerical Validation
F-45: Grain Refinement Technology of Mg Alloy for Road Wheel Application
F-46: Improvement of Mechanical Properties of Mg Alloys Through Confined Rolling
F-47: Influence of Ag Additions on Formability and Strength of a Mg-Zn-Zr Alloy Subjected to Severe Plastic Deformation via Equal Channel Angular Pressing
F-48: Influence of Manganese on Deformation Behavior of Magnesium Under Dynamic Loading
F-49: Investigation on the Microstructure and Castability of As-cast Mg-3Y-2Gd-1Nd-0.4Zr Alloy
F-50: In-vivo Performance of Bioabsorbable BioMg 250 Mg Alloy Implants
F-51: Microstructure and Hardness of Porous Magnesium Processed by Powder Metallurgy Using Polystyrene as the Space Holder
F-52: Microstructure and Mechanical Properties of Mg-6Sn Alloy Processed by Differential Speed Rolling
F-53: Novel Low-cost Magnesium Alloys with High Yield Strength and Plasticity
F-55: Preparing Magnesium Alloys for Electron Backscatter Diffraction
F-56: Quantifying Dislocation Behavior in Mg Using a Phase Field Dislocation Dynamics Model Multiple Active Slip Planes
F-57: Sol-gel Based Lanthanum Phosphate Coating on Magnesium Alloys for Corrosion Resistance
F-58: Study on Creep Behavior and Microstructure Evolution of T6 State Mg-15Gd Metal Mold Casting Alloy
F-59: The Application of Hydrogen-containing Phase Diagram Calculations on the Design of Mg-RE Hydrogen Storage Alloy
F-60: The Study of Galvanic Corrosion of Magnesium Alloy from the Perspective of Work Functions
F-61: Thermomechanical Processing of Dilute Mg-Zn-Ca Alloys
Friction Stir Processing of Magnesium Alloy with Spiral Tool Path Strategy
Full-field Crystal Plasticity Modeling of {10-12} Twin Nucleation
Fundamental Deformation Mechanisms During Solid Phase Processing of Mg Alloys
Hierarchically Structured Ultrafine Grained Magnesium Alloys
In-situ TEM Investigation of Dislocations in Magnesium
Insights on Solidification of Mg and Mg-Al Alloys by Large Scale Atomistic Simulations
Intermetallic Phase Formation in Mg-Ag-Nd (QE) and Mg-Ag-Nd-Zn (QEZ) Alloys
Investigation and Modeling of the Influence of Cooling Rates on the Microstructure of AZ91 Alloys
Investigation of the Microstructure and Mechanical Properties of Mg–Gd–Nd Ternary Alloys
Joining Dissimilar Materials via Rotational Hammer Riveting Technique
Mapping Anisotropy and Triaxiality Effects in Magnesium Alloys
Microstructure Evolution and Precipitation Strengthening in Ca-containing Mg-rare Earth Alloys
MultiStage Fatigue (MSF) Modeling of Magnesium in a Corrosion Environment
Novel Texture Controlling of Mg Alloys
Numerical Investigation of Micro-galvanic Corrosion in Mg Alloys: Role of the Cathodic Intermetallic Phase Size and Spatial Distributions
On the Influence of Twinning and Detwinning on the Deformation of Mg at the Micron Scale
On the Load Multiaxiality Effect on the Cyclic Behaviour of Magnesium Alloys
Producing High Purity Magnesium (99.99%) Directly by Pidgeon Process
Producing Pure Magnesium Through Silicothermic Under the Atmospheric Pressure
Quantitative Relationship Analysis of Mechanical Properties with Microstructure and Texture Evolution in AZ Series Alloys
Recrystallization Effects on the Forming Behaviour of Magnesium Alloy Sheets with Varied Calcium Concentration
Relating Texture and Thermomechanical Processing Variables in Mg-Zn-Ca Alloys
Research on Properties of Prefabricated Pellets of Silicothermic Process After Calcination in Flowing Argon Atmosphere
Study of In-vitro Biodegradation Behavior of Mg-2.5Zn-xES Composite
The Corrosion Behavior of High Purity Mg According to Process History
The Effect of Plastic Deformation on the Precipitation Hardening Behavior of Biodegradable Mg-Sr-Ca-Zn Based Alloys
The Incorporation of Discrete Deformation Twins in a Crystal Plasticity Finite Element Framework
The Independent Effects of Cooling Rate and Na Addition on Hydrogen Storage Properties in Hypo-eutectic Mg Alloys
The Role of Faceting in {1012} Twin Nucleation
Thermodynamic Description and Thermophysical Properties of Mg-Gd Alloys and Quantitative Phase-field Simulation of their Solidification Process
Thermodynamic Descriptions of the Quaternary Mg-Al-Zn-Sn System and their Experimental Validation
Towards the Development of High Ductility Mg-Al Based Alloys Through Second-phase Refinement with Trace Yttrium Additions
Twin Transmission Across Grain Boundaries in Mg
Two-Stage Settling Approach to Purify Mg Alloy
Variation of Extrusion Process Parameter for the Magnesium Alloy ME21

Questions about ProgramMaster? Contact