ProgramMaster Logo
Conference Tools for 1st International Conference on Technological Innovations in Metals Engineering (TIME)
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 1st International Conference on Technological Innovations in Metals Engineering (TIME)
Symposium Technological Innovations in Metals Engineering (TIME)
Sponsorship
Organizer(s) Shai Essel, Technion Israel Institute of Technology
Brett Conner, Youngstown State University
Scope The conference welcomes participants with interests in applied research, technology development, technology transition and implementation in metals engineering with emphasis on innovations with Technology Readiness Level 4-9. Key topics of interest for TIME 2018 are:

- Additive manufacturing
- Metals processing through shaping, forming, and solidification
- Alloys and critical materials
- Applications

Within these topic areas, presentations are sought that involve the full range of metals innovations and technologies including: metals processing, characterization, in situ monitoring, alloy and temper development, non-destructive evaluation, process planning, and modeling & simulation.
Abstracts Due 12/18/2017
Proceedings Plan Undecided
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

3D Bioprinting of Hybrid Materials for Regenerative Medicine Implementations in Innovative SMEs
3D Printing of Fe77Ni5.5Co5.5Zr7B4Cu1 High Temperature Magnetic Powders
A Comparative Study of Laser Surface Melted and LENSTM Deposited Gray Cast Iron
A Revolution in Battery Technology
Accelerated Development of Substitutes for Rare-Earth Permanent Magnets
Actual Changes of Materials and Production Processes of the Primary Structure of Large Passenger Aircrafts
Additive Manufacturing - The Enabling Space for Future Innovation Game-changing Recent Achievements and Emphases
Additive Manufacturing of Ti6Al4V (ELI) Medical Implants
Advanced Intermetallic Titanium Aluminides - Development Status and Applications
Advanced Manufacturing of Near-Net-Shape Parts from Functional Materials: 3D Printing of Porous Ni-Mn-Ga Magnetic Shape Memory Alloys
An Effect of DMLS Process Parameter on Surface Roughness and Dimensional Accuracy Of CL50WS Material
Analytical and Experimental Investigation of Passive Granular Medium-based Tube Press Hardening
Application of Additive Manufacturing for Veterinary Medical Implants
Burnishing of AISI 4140 alloy steel surface using diamond matrix composite tools
Characterization of Interface Strength Obtained by Hot Rolling: A Computational Study Validated by Experiments on Al 1050 and Al 6061
Characterization of Molybdenum Processed by Equal Channel Angular Pressing
Closed Cell Aluminium Foam Applications
Comparison of Various Properties of Ti Alloys for Implant Making
Compression Creep of Copper under Electric Current Studied by a Spark Plasma Sintering (SPS) Apparatus
Critical Raw Materials and their influence in the key present and future technological and industrial value chains for Europe
Development of a Ni-base Superalloy for Additive Manufacturing
Efficient Laser Solutions for Industry
Efficient Manufacture of Titanium Aircraft Parts by Linear Friction Welding
Electro Chemical Machining (ECM), an Effective Method for Processing Materials used in Extreme Working Conditions- (Achievable Tolerances and Advantages of ECM)
Facts and Myths of Niobium Recycling
Graphene as an Effective Support for Nickel Nanoparticles as a Catalyst for Methanol Electro-oxidation in Alkaline Medium
Heat Treated Cast Iron as Ballistic Protection
Improvement of Gas Atomization Processing Efficiency and Powder Quality to Benefit Additive Manufacturing
Improvements in Welding Properties through the Use of Interlayer
In Situ Neutron Diffraction of Additive Manufactured Ti6Al4V Under Tensile Stress
Influence of Low Temperature on Impact Energy and Microstructure of Unalloyed ADI Material
Influence of Nanoparticles Amount on Erosive Wear Properties of ZA-27 Alloy-based Dual-size Composites
Influence of Shielding Gas Composition on Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Inconel 625
Joining of Additive Manufactured Components by Arc Welding
Laser Additive Processing of a Functionally Graded Internal Fracture Fixation Plate
Laser and Electron Beam Welding of Additive Manufactured and Wrouhgt Ti-6Al-4V Parts
Laser Assisted Synthesis of High Entropy Alloy Coating on Aluminum: Tribocorrosion Behavior
Light-Weighting in Metal Additive Manufacturing Using Topological Optimization
Lithium as a Key Actor in Globally Decarbonised Mobility, Electronics and Future Energy Markets: A Circular Economy Assessment
Lithography-based Additive Manufacturing of Metal-based Suspensions
Manufacturing of Functionalized Surfaces for Influencing the Tribological Behavior of Metallic Parts by Cutting Operations
Mapping the Tray of Electron Beam Melting (EBM) Ti-6al-4v Samples - Properties and Microstructure
Material Developments in Binder Jet 3D Printing
Mechanical Behavior of 3D Printed Lattice-Structured Materials
Mechanical Processing of Li-Ion Batteries
Mechanical Properties of AlSi10Mg Specimens Fabricated by Additive Manufacturing Using Selective Laser Melting (AM-SLM)
Mechanical Properties of EB-welded AM-SLM AlSi10Mg Alloy
Metal-coated Cenospheres via Magnetron Sputter Coating Route - A New Precursor for Metal Matrix Syntactic Foams
Metal Fiber Brushes for Slip Ring and an Innovative Application
Metals Additive Manufacturing from High-end Technology to Commodity
Methodology for Maturity Evaluation of Powder Bed Additive Manufacturing Based on MRL and NDE
Micron-scale Additive Manufacturing Using Laser Transfer of Metals
Micron-scale Monte Carlo Simulations for Additive Manufacturing Process using Electron Beam
Microstructural Evolution and Defect Control in Al-Si-Mg Components Fabricated via Directed Energy Deposition (DED)
Microstructure and Sliding Wear Performance of Cr7C3-(Ni,Cr)3(Al,Cr) Coating Deposited from Cr7C3 In Situ Formed Atomized Powder
Mitigation of Metals Corrosion in Energy Generation Plants by Their Surface Protection with Coatings
Mixed Light Inspection: A Novel Technique to Enhance Fluorescent Dye and Magnetic Particle Inspections
Multi-Materials and Multi-Functionality Enabled by Hybrid Additive Manufacturing
Nickel Oxide Functionalized Graphene Oxide – Polyacrylamide Nanocomposites
Overview of Additive Manufacturing in Metal Forming at the IUL
Perspectives of XCT for Nondestructive Studying of Metallic Micro and Nano Structures
Properties of Wire and Arc Additive Manufactured Materials
Recent Developments in the Research of BCC Refractory High Entropy Alloys
Residual Stress Reduction in Selective Laser Melting of Nickel Superalloys
Review of goals and results of Horizon2020 NOVAMAG project - Development of non-rare-earth and rare-earth-lean permanent magnets
Seamless Flowformed Tube Made of Wire Arc Additive Manufacturing
SLM printed steel conformal cooled insert for extrusion dies with anti-wear bearings
Solid-state additive manufacturing and post-processing of the Al/Ti system
Solidification during Selective Laser Melting of Co-29Cr-6Mo Alloy
Spark Plasma Sintering Method for Recycling of Tungsten-Containing Composite Materials
State-of-the-art and Experiences of New Material and Process Development for EBM
Strategies for Development of Novel Material Systems and Coatings for Extreme Environments
Studying the Combinatorial Effect of Platinum Group Metals and Rare Earths for Catalytic Performance Enhancing for Automotive Applications
Surface Contamination and Carbide Free Zone Formation during Hot Isostatic Pressing of Superalloy IN100
Surface modification of AM parts using plasma electrolytic polishing
Temperature Effects on High Strain Rate Behaviour of a Tungsten Alloy
The Concern of Critical Raw Materials
The Effects of Heat Treatments on the Physical Properties of NiTi20Hf Shape Memory Alloy
The Effects of Thermomechanical Treatments on a New Fe-rich Dual-phase Complex Concentrated Alloy (CCA)
The Internet of Things (IoT) for Casting with 3D Printed Sand Molds
Thermally Induced Porosity (TIP) in Additively Manufactured (AM) AlSi10Mg Alloy
Titanium in Chemical Industries and Medical Applications: Laboratory Research and Industrial Performance
Tungsten Additive Manufacturing–Technical Aspects
Ultrasonic Characterization of Additively Manufactured AlSi10Mg Using Time of Flight and Attenuation Calculations
Wear Properties of Friction Stir Processed Aluminium-Magnesium Alloy
Weldability of Austenitic Stainless Steels with Filler Materials Containing Different Percentages of Alloying Elements


Questions about ProgramMaster? Contact programming@programmaster.org