ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Materials Processing Fundamentals
Sponsorship TMS Extraction and Processing Division
TMS: Process Technology and Modeling Committee
Organizer(s) Antoine Allanore, Massachusetts Institute of Technology
Jonghyun Lee, Iowa State University
Guillaume Lambotte, Boston Electromet
Scope The key interest areas to be covered in this symposium are all aspects of the fundamentals, synthesis, analysis, design, monitoring, and control of metals, materials, and metallurgical processes and phenomena. Topics will include
- the experimental, analytical, physical and computer modeling of physical chemistry and thermodynamics;
- Modeling on the transport phenomena in materials processing and metallurgical processes involving iron, steel, non-ferrous metals, and composites;
- second phase particles in metals and processes, such as non-metallic inclusions and bubbles in metals (steel, aluminum, silicon, magnesium etc...) or gas bubbles in slag or electrolyte (foaming, gas evolution or injection...); the fundamentals (experimental studies or theoretical studies) on the nucleation, growth, motion and removal of these second phase particles from the molten metal or reactors;
- physical chemistry, thermodynamics and kinetics for the production and refining of rare earth metals;
- Control of industrial processes in the field of extraction and processing of metals and materials: novel sensors for hostile-environment materials processes, such as online inclusion detection, temperature, and velocity in molten materials, surface condition of hot moving products, etc.; innovative online sampling and analysis techniques; models for real-time process control and quality monitoring systems.
Abstracts Due 07/17/2016
Proceedings Plan Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)

A Systems Approach for Modeling the Dynamic Thermomechanical Response of Carbon Steels
Applied Statistical Analysis on the Calcination Process in the Ferronickel Production
Development of Ultra High-basicity Mold Fluxes for Peritectic Steel Continuous Casting
E-53: Control of Low Melting Point MnO-SiO2-Al2O3 Inclusions in Low Carbon Thin-strip Continuous Casting Steel
E-55: Effect of Temperature, Concentration and Particle Size of the Solid Solution of Potassium-ammonium Arsenojarosita Medium NaOH
E-56: Effects of Zr on the Microstructure and Mechanical Properties of EH36 Shipbuilding Steel
E-57: Genetic Influence of Mold Corner Structure on the Strand Corner Temperature in Secondary Cooling Zone during Slab Continuous Casting
E-58: Growth Kinetics on Boriding Process and Mechanical Behaviour of AISI P20 Steel
E-60: Numerical Simulation and Experimental Study on Electromagnetic Field and Heat Flow in Electromagnetic Cold Crucible (EMCC)
E-61: Recent Progress of Blast Furnace Cooling Stave in China
E-62: Separately Copper Recovery from Iron by Using Solvent Extraction Process
E-64: Study of a Filter-press Electrochemical Reactor for the Treatment of Industrial Waste
E-65: The Effect of Ti Addition and Aging Treat on Microstructure and Mechanical Properties of a Nb-microalloyed Crack Arrest Steel
E-66: The Interface Characteristics of High-temperature Melt of CaO-Al2O3-MgO-SiO2 System
Evaluation Feature of Nano Grain Growth of TiO2 Thin Film via Sol- gel Route
Evolution and Formation of CaS-bearing Inclusion in Low-Carbon Al-killed Steel
Experimental Study and Modeling of the Stress Field in Macroscopic Creep Feed Grinding Process
Gallium Evaporation Behavior for Purification in Molecular Beam Epitaxy (MBE)
Gleeble Sintering Simulations of Cryomilled Aluminum AA5083
Influence of MgO Saturation on the ConSteel EAF Foaming Slag Practice
Influence of Oxygen on Surface Tension of Zr
Investigation of Mixing Process in a Steel Ladle with Top Stirring Lance Using CFD
Kinetics of Manganese Reductive Alloying with Carbon and Silicon
Machining Behaviour of Biodegradable Polymer: Force, Damage and Temperature Analysis
Mass Transfer of Al and Ca between Silicon and Synthetic SiO2-CaO-Al2O3 Slags
Mathematical Modelling of Residual Stresses in End Milling
Microstructural and Mechanical Behavior Evolution of Uranium During Thermal-Mechanical Deformation Processing
Oscillation of a Zirconium Droplet – Experiments and Numerical Simulations
Phase Transformation and Precipitation Modeling of Hypereutectic Al-Mn Alloy during Solidification
Predominant Areas on a Partial Pressure Diagram for Multi-Component Systems: II. Applications, Gibbs Phase Rule and 3D Visualization
Predominant Areas on a Partial Pressure Diagram for Multi-Component Systems: I. Comparison Equilibrium-Line and Mass-Balanced Point Methods
Study for Leaching Process of Low Grade Copper Ore
Thermal Analyses of Silver-based Sulfosalts in Air

Questions about ProgramMaster? Contact