ProgramMaster Logo
Conference Tools for 2017 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2017)
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2017 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2017)
Symposium 2017 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2017)
Scope New venue: The SFF Symposium conference hotel is the four-star Hilton Austin Hotel, 500 East 4th Street, in downtown Austin.  Technical sessions will also be held at the Hilton Austin Hotel.
Abstracts Due 04/17/2017
Proceedings Plan Definite: Post-meeting proceedings

A Parametric Study on Grain Structure in Selective Laser Melting Process for Stainless Steel 316
316L Powder Reuse for Metal Additive Manufacturing
3D bioprinting of scaffold structure using micro-extrusion technology
3D LSP: Tailoring Residual Stresses in Parts by Introducing Laser Shock Peening during Selective Laser Melting
3D Printable Recyclable Thermosets
3D Printing of Ceramic Suspensions Using Microstereolithography toward Water and Gas Filtration
3D Printing of Flexible & Stretchable Electronics at Room Temperature via Liquid Metal Direct-writing
3D Printing of Humidity Sensor Based on Swelling Kinetics of Hydrogel
3D Printing of Metal Powder-based Inks via Direct Ink Writing
5-Axis Slicing Methods for Additive Manufacturing Process
A Close-up View onto the Strong Dynamics in Laser Metal Powder Bed Fusion
A Design of Experiments Approach to Observing the Effect of Primary Process Parameters on Porosity Populations and Fatigue Life in DMLS Inconel 718
A Direct 4D Printing Method Using Multimaterial 3D Printing
A Finite-element Simulation of Spherical Indentation of LENS-processed 316L Stainless Steel
A Floor Power Module for Cooperative 3D Printing
A Framework for the Design of Biomimetic Cellular Materials for Additive Manufacturing
A Hybrid Method for Additive Manufacturing of Silicone Structures
A Method for Metal AM Support Structure Design to Facilitate Removal
A Micro-Tailoring Technique to Alter the Spatial Distribution and Orientation of Particles in a Stereolithography Fabricated Composite Part and Quantification of Alignment in the Part
A Mobile 3D Printer for Cooperative 3D Printing
A Mobile Robot Gripper for Cooperative 3D Printing
A Modified Inherent Strain Method for Fast Prediction of Residual Deformation in Additive Manufacturing of Metal Parts
A Modular Direct Write Additive Manufacturing Approach in the Printing of Multi-materials and Ceramics
A Normalized Dispensing Modeling Method for Feature Prediction in Direct Ink Writing Process
A Novel Strategy to Build Support-free Overhang Surface below Critical Angle in Direct Metal Laser Sintering Process
A Post-Processing Procedure for Level Set based Topology Optimization
A Rheometry-validated Model for Predicting the Spreading Process in Metal Additive Manufacturing (AM)
A Slicer and Simulator for Cooperative 3D Printing
A Study into the Effects of Gas Flow Inlet Design in a Renishaw AM250 Laser Powder Bed Fusion Machine Using Computational Modelling
A Study of Nanoparticle Binder’s Impact on the Binder Jetting Additive Manufacturing Process
A Study of the Size Effect of Fracture on Additively Manufactured Periodic Cellular Structures
A Trade-off Analysis of Recoating Methods for Vat Photopolymerization of Ceramics
A Two-dimensional Simulation of Grain Structure Growth within Substrate and Fusion Zone during Direct Metal Deposition
A Viscoelastic Model for Evaluating Extrusion-Based Print Conditions
Accuracy and Variation in Small Channels Produced by Bronze Infiltration of Binder Jet Prints
Achieving Functionally-graded Material Composition through Bicontinuous Mesostructural Geometry in Material Extrusion AM
Acoustic Field-assisted Particle Patterning for Smart Polymer Composite Fabrication in Stereolithography
Active-Z Printing: A New Way to Improve 3D Printed Part Strength
Active Control of Microstructure in Electron Beam Melting of Ti6Al4V
Additive Manufacturing and Mechanical Evaluation of the Stiffness-matched Mandibular Bone Fixation Plates
Additive Manufacturing for Embedded Microelectronics
Additive Manufacturing of Current Collectors for MicroBatteries through Aerosol Jet Printing
Additive Manufacturing of Flexible 3-3 Ferrorelectric Ceramic/Polymer Composite Based on Triply Periodic Cellular Micro-skeleton
Additive Manufacturing of Freestanding Glass Structures
Additive Manufacturing of Glass-to-metal Seals
Additive Manufacturing of High Entropy Alloys: A Review
Additive Manufacturing of Metallic Glass
Additive Manufacturing of Porous Materials
Additive Manufacturing of René 142 through Scanning Laser Epitaxy (SLE)
Additive Manufacturing of γ' and γ'' Nickel Super alloys by Renishaw Laser Melting Machines
Additive Manufacturing Utilizing Stock Ultraviolet Curable Silicone
Additively Manufactured Conformal Negative Stiffness Honeycombs
Adhesion of Reactive Silver Inks on Indium Tin Oxide Films
Adjustment of Part Properties for an Elastomeric Laser Sintering Material
Advanced Hybrid Manufacturing: Roadmap of Technological Challenges
Alumina-zirconia Ceramics Fabricated by Ultrasonic Vibration-assisted Laser Engineered Net Shaping Process
Aluminum Matrix Syntactic Foam Fabricated with Additive Manufacturing
An Evaluation of Carbon Composite Axial Lattice Structures
An Investigation into Spatter Creation during Selective Laser Melting
An Investigation of Build Orientation on Shrinkage in Sintered Bioceramic Parts Fabricated by Vat Photopolymerization
An Investigation of Property Anisotropy of 3D Periodic Cellular Structure Designs
An Online Surface Defects Detection System for AWAM Based on Deep Learning
Analysis of Hybrid Manufacturing Systems Based on Additive Manufacturing Technology
Analytical and Experimental Characterization of Anisotropic Mechanical Behaviour of Infill Building Strategies for Fused Deposition Modelling Objects
Applied Solvent-based Slurry Stereolithography Process to Fabricate High Performance Ceramic Earrings with Exquisite Details
Approaching Rectangular Extrudate in 3D Printing for Building and Construction by Experimental Iteration of Nozzle Design
Areal Surface Characterization of Laser Sintered Parts for Various Process Parameters
Assessment of Optical Emission Analysis for In Process Monitoring of Powder Bed Fusion Additive Manufacturing
Assessment of Porosity Formation in Additively-Manufactured Parts via Numerical Thermomechanical Simulation
Automatic and Reusable Metal Supports for 3D Printing
B-spline Based Topology Optimization for Metal Hybrid Additive-subtractive Manufacturing
Basis Function Superposition for Thermal Modeling of Selective Laser Melting
Big Area Additive Manufacturing Application in Wind Turbine Molds
Binder Jet Additive Manufacturing of Stainless Steel,Tricalcium Phosphate Biocomposite for Bone Scaffold Applications
Binderless Jetting: Additive Manufacturing of Metal Parts via Jetting Nanoparticles
Bio-inspired Micro-scale Texture Fabrication based on Immersed Surface Accumulation Process
Bioactive Hydrogels for Bioprinting
Biofabrication of 3D Vascular Constructs of Interpenetrating Network Hydrogel Using a Yield-stress Fluid Bath
Biofabrication of a 3D Vascular Network Using Dynamic Optical Projection Stereolithography
Biomimetic Anisotropic Reinforcement Architectures by Electrically Assisted Nanocomposite 3D Printing
Blown Powder Laser Cladding with Novel Processing Parameters for Isotropic Material Properties
Bonding of 304L Stainless Steel to Cast Iron by Selective Laser Melting
Brittle-tough Transition through Microcrack Modulating in 3D Printing Fe-based Metallic Glass Composite
Building Zr-based Metallic Glass Part on Ti-6AL-4V Substrate by Laser-foil-printing Additive Manufacturing
Casting-forging-milling Composite Additive Manufacturing Technology
Casting Low Density Lattice Structures with 3D Printed Sand Molds
Ceramic Additive Manufacturing: A Review of Current Status and Challenges
Challenges in Making Metal Large-scale Complex Parts for Additive Manufacturing: A Case Study Based on the Additive Manufacturing Excavator (AME)
Changing Print Resolution on BAAM via Selectable Nozzles
Characterization of Ejected Particles or Spatter during Laser Powder Bed Additive Manufacturing
Characterization of Heat-affected Powder Generated during Selective Laser Melting of 304L Stainless Steel Powder
Characterization of Inconel Alloy 625 Fabricated Using Powder Bed-based Additive Manufacturing Technologies
Characterization of MAR-M247 Deposits Fabricated through Scanning Laser Epitaxy (SLE)
Characterization of Melt Pool Morphology for Electron Beam Melting Processes of Ti6Al4V, Inconel 625, and Inconel 718 Alloy Systems
Characterization of Thermal and Vapor Smoothing on Surface Roughness of Extruded Components for Printed Electronics
Characterization of Wirebondability to Copper Nanoparticle Traces Produced via Inkjet Printing
Characterizing the Dynamics of Laser Powder Bed Fusion Additive Manufacturing Processes by High-speed High-energy X-ray Imaging and Diffraction
Classification Based Porosity Prediction Technique Using Melt Pool Signal
Comparative Costs of Additive Manufacturing vs. Machining: The Case Study of the Entire Annual Production of Forming Dies for Tube Bending
Comparison of 3D Microstructural Modeling for Powder Bed and Powder Fed Metal AM Methods
Competing Influence of Porosity and Microstructure on the Fatigue Property of Laser Powder Bed Fusion Stainless Steel 316L
Composite Lithium Electrode Based on Silicon Nanofiber
Computational Simulation of Additively Manufactured Marine Structures
Computationally Efficient Finite Element (FE) Framework to Simulate Additive Manufacturing Process
Computed Axial Lithography (CAL) for Rapid Volumetric 3D Additive Manufacturing
Computer Aided High Complex Geometry Generation for Product Optimization with Additive Manufacturing
Consideration of Fluid Physics on the Residual Stress in a Singe Track of Material
Considering Machine- and Process-specific Influences to Create Custom-built Specimens for the Fused Deposition Modeling Process
Constructing Heterogeneous Tumor Models by Integrated Cell Printing System
Construction of Metallic Glass Structures by Laser-foil-printing Technology
Continuous Laser Scan Strategy for Faster Build Speeds in Laser Powder Bed Fusion System
Control of Microstructure in Selective Laser Melting
Controlling Thermal Expansion with Lattice Structures Using Powder Bed Laser Fusion
Cooling Optimization of 3D Printed Camera Cell Cooling Housing for Machine Vision in High Temperature Condition
Correlation of Engineering Properties with Modal Analysis Parameters for Metal SLM Parts
Corrosion Behavior of Metals Manufactured by Selective Laser Melting
Corrosion Resistance Behavior Study of SLM Inconel 718 Sample under Different Surface and Heat Treatment
Cost-efficient Design and Machine Productivity: A Technology-spanning Approach
Cracking Behavior of High Gamma Prime Ni-base Superalloys Fabricated through Additive Manufacturing
Critical Defect Signatures and Impacts on Material Performance for Metal Laser Powder Bed Fusion
Data Driven Approach to Create a Geometry Independent Surrogate Model for Thermal History in Additive Manufacturing
Defect Detection in Metal SLM Parts Using Modal Analysis “Fingerprinting”
Defects Detection of Laser Metal Deposition Using Acoustic Emission Sensor
Design and Additive Manufacturing of a Composite Crossflow Heat Exchanger
Design and Development of a Multi-Tool Additive Manufacturing System
Design and Fabrication of an Experimental Microheater Array Powder Sintering Printer
Design and Fabrication of Functionally Graded Material from Ti to γ-TiAl by Laser Metal Deposition
Design and Preliminary Evaluation of a Deployable Mobile Makerspace for Informal Additive Manufacturing Education
Design and Process Considerations for Effective Additive Manufacturing of Heat Exchangers
Design for Hybrid Additive Manufacturing by Drop Tower Testing Shot Peened Almen Strips
Design for Protection: Systematic Approach to Prevent Product Piracy during Product Development Using AM
Design of a Desktop Wire-feed Prototyping Machine
Design of a Projection Sintering Test Platform
Design Optimisation of a Thermoplastic Splint
Design, Fabrication, and Qualification of a 3D Printed Metal Quadruped Body: Combination Hydraulic Manifold, Structure and Mechanical Interface
Detection of Defects and Studying Effect of Defects Using X-ray Computed Tomography
Determination of a Shape and Size Independent Material Modulus for Honeycomb Structures in Additive Manufacturing
Determining the Complex Young’s Modulus for Polymer Materials Fabricated with Microstereolithography
Development of a Desktop Metal Printer
Development of A Hybrid Manufacturing Process for Precision Metal Parts
Development of an Experimental Lasersintering Machine to Process New Materials like Nylon 6
Hide details for [<a href="/PM/PM.nsf/ApprovedAbstracts/D64B59AA0CDC22C9852580F80029EA96?OpenDocument">Development of an ExperiDevelopment of an Experimental Test Setup for In Situ Strain Evaluation during Selective Laser Melting
[Replication or Save Conflict]
Development of Automatic Smoothing Station Based on Solvent Vapour Attack for Low Cost 3D Printers
Development of Low Temperature Co-fired Ceramic (LTCC) Extrudate for Ceramic On-demand Extrusion
Development of Simulation Tools for Selective Laser Melting Additive Manufacturing
Development of Sintering Parameters for Full Densification of H13 Tool Steel Printed via Binder Jet Additive Manufacturing
Development of virtual surgical planning models and a patient specific surgical resection guide for treatment of a distal radius osteosarcoma using medical 3D modelling and additive manufacturing processes
Digital Design and Manufacture of Soft Lattice Structures
Digital Light Processing (DLP): Anisotropic Tensile Considerations
Dilution and Mixing for Functionally Gradient DED Printed Stainless Steel Components with Dissolvable Carbon Steel Supports
Direct Additive Subtractive Hybrid Manufacturing (DASH): An Out of Envelope Method
Direct Writing of Films from High Speed Aerosol Deposition of Ag
Directional Dependence of Mechanical Properties and Defects of LENS 304L
Discrete Element Modeling of Powder Spreading and Flow for Metal Additive Manufacturing
Dissolvable Metal Supports Processes for Powder Bed Fusion Printed Inconel 718
EcoPrinting: Investigating the Use of 100% Recycled Acrylonitrile Butadiene Styrene (ABS) for Additive Manufacturing
Effect of a Mid-build Halt on the Microstructure and Porosity in Powder Bed Fusion Stainless Steel Parts
Effect of Bed Temperature on the Laser Energy Required to Sinter Copper Nanoparticles
Effect of Constrained Surface Texturing on Separation Force in Projection Stereolithography
Effect of Contact Angle on Reactive Ink Droplet Evolution
Effect of Heat Treatment and Hot Isostatic Pressing on the Morphology and Size of Pores in Additive Manufactured Ti-6Al-4V Parts
Effect of Heat Treatment on the Microstructures of CMSX-4® Processed through Scanning Laser Epitaxy (SLE)
Effect of Heterogeneous Nucleation on Microstructure Modeling in Powder-bed Metal Additive Manufacturing
Effect of Optimizing Particle Size in Laser Metal Deposition with Blown Pre-mixed Powders
Effect of Printing Speed on Quality of Printed Parts in Binder Jetting Process
Effect of Process Parameter Variation on Microstructure and Mechanical Properties of Additively Manufactured Ti-6Al-4V
Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)
Effect of Process Parameters and Shot Peening on the Tensile Strength and Deflection of Polymer Parts Made using Mask Image Projection Stereolithography (MIP-SLA)
Effect of Specimen Surface Area Size on Fatigue Strength of Additively Manufactured Ti-Al-4V Parts
Effect of Zone Creation to Locally Control Microstructure in Powder Bed Fusion Stainless Steel
Effects of AlSi10Mg Feedstock Condition on Part Properties
Effects of Area Fraction and Part Spacing on Degradation of 304L Stainless Steel Powder in Selective Laser Melting
Effects of Build Orientation on Fatigue Performance of Ti-6Al-4V Parts Fabricated via Laser-based Powder Bed Fusion
Effects of Processing Parameters on the Mechanical Properties of CMSX-4® Additively Fabricated through Scanning Laser Epitaxy (SLE)
Effects of Scanning Strategy on Residual Stress Formation in Additively Manufactured Ti-6Al-4V Parts
Efficient Fabrication of Ti6Al4V Alloy by Means of Multi-laser Beam Selective Laser Melting
Efficient Sampling for Design Optimization of an SLS Product
Electrical and Mechanical Properties of Metal Filled Conductive Material Using Fused Deposition Modeling
Electrical Properties of Reactive Silver Inks on Indium Tin Oxide Films
Electrochemical Enhancement of the Surface Morphology and the Fatigue Performance of Ti-6Al-4V Parts Manufactured by Laser Beam Melting
Embedding of Liquids into Water Soluble Materials via Additive Manufacturing for Timed Release
Energy Coupling Efficiency and Melt Pool Dynamics Associated with the Laser Melting of Metal Powder Layers
Enhanced Reliability and User Interface for Low-cost FDM 3D Printers
Estimating Strength of Lattice Structure Using Material Extrusion Based on Deposition Modeling and Fracture Mechanics
Evolution of Raw Powder Characteristics through the Additive Manufacturing Reuse Cycle
Evolution of Raw Powder Characteristics through the Additive Manufacturing Reuse Cycle
Ex situ Determination of Melt Pool Length Through Surface Finish Metrology in Laser Powder Bed Fusion Additive Manufacturing
Examination of Build Orientation and Its Impact on 316 Stainless Steel Dissolvable Supports
Examination of the effect of various post processing treatments on laser sintered Nylon 12
Expanding Material Property Space Maps with Functionally Graded Materials for Large Scale Additive Manufacturing
Experimental Analysis on Eradicating Porosity from Additively Manufactured Low Alloy Steels by Using Martensitic Stainless Steel Powder Reinforcement Technique
Experimental and Analytical Analysis of Nanoparticle Assemblies for High-throughput Nanomanufacturing
Expert Survey to Understand and Optimize Workpiece Orientation in Direct Metal Laser Sintering
Exploring the Manufacturability and Resistivity of Conductive Filament Used in Material Extrusion Additive Manufacturing
Fabricating TiC/Ni3Al Hybrid Composite Using Binder Jet Additive Manufacturing
Fabricating Zirconia Parts with Organic Support Material by the Ceramic On-Demand Extrusion Process
Fabrication and Characterization of Graphite/Nylon 12 Composite via Binder Jetting Additive Manufacturing Process
Fabrication and characterization of Ti6Al4V by selective electron beam and laser hybrid melting
Fabrication and Control of a Microheater Array for Microheater Array Powder Sintering
Fabrication and Quality Assessment of Thin Fins Built Using Metal Powder Bed Fusion Additive Manufacturing
Fabrication of 3D Multi-material Parts Using Laser-based Powder Bed Fusion
Fabrication of Metallic Multi-material Components Using Laser Metal Deposition
FAME Outstanding Young Researcher Award Lecture: Quantifying Processing-structure-property Relationships in Additively Manufactured Metals
Fatigue Behavior of Additive Manufactured Parts in Different Process Chains: An Experimental Study
Fatigue Behavior of Surface Treated Ti-6Al-4V Made via Electron Beam Melting as Input for Hybrid Process Planning System
FDM with Natural Fibre Reinforced PLA
Fiber-fed Laser-melting Process for Printing Transparent Glass
Filament Extension Atomization of Polymer Melts: A Novel Approach to Generating Powders for Selective Laser Sintering
Flash Laser Sintering of Ceramics
Flexible and Stretchable Ionic Liquid Based Pressure Sensor Fabrication via Direct-print Photopolymerization
Flexural Behavior of FDM Parts: Experimental, Analytical and Numerical Study
Flow Behaviour of Laser Sintering Powders at Elevated Temperatures
FPGA-based Solution for High-speed Control of a Laser Powder Bed Fusion Testbed
Fracture Behavior of Thermally Annealed, Additively Manufactured Polymers
Fracture Mechanism Analysis of Schoen Gyroid Cellular Structures Manufactured by Selective Laser Melting
Framework for Design and Manufacture Integration of 3D Printing of Products with Functionally Graded Properties
Freeform and Additive Manufacturing (FAME) Award II: A Journey through Time and Around the World of Solid Freeform Fabrication
From CAD Models to Parts: Software Development for the Wire+ Arc Additive Manufacture Process
Generation of deposition paths and quadrilateral meshes in Additive Manufacturing
Generation of TPMS Cellular Lattice Structures to Fill an Arbitrary Boundary
Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling
Guidelines for Developing Binder Jet Printing Parameters for Various Powder Feedstocks
High-resolution Electrohydrodynamic Jet Printing of Molten Polycaprolactone
High-speed Imaging of the Powder-bed and Shield Gas during Metal PBF Additive Manufacture
High Speed Thermal Imaging of the Melt Pool during Laser Powder Bed Fusion of Metal Alloys
Highly Removable Water Support for Stereolithography
How Significant is the Cost Impact of Part Consolidation within Additive Manufacturing Adoption?
Hybrid Additive Manufacturing of Steel by LENS and Laser Shock Peening
Hypervelocity Impact of Additively Manufactured A356/316L Interpenetrating Phase Composites
Impact of Energy Density on Energy Consumption and Porosity of 17-4PH Stainless Steel Fabricated by Selective Laser Melting
Impact of Hastelloy-X Composition on Crack Formation in Powder Bed Fusion Additive Manufacturing
Implicit Slicing Method for Additive Manufacturing Processes
Improvement of Recycle Rate in Laser Sintering by Low Preheat Temperature Process
Improving Fatigue Performance of Ti6Al4V As-built Electron Beam Melting Parts using Surface Mechanical Attrition Treatment
In-process Condition Monitoring in Laser Powder Bed Fusion (LPBF)
In Process Monitoring in Metal Powder Bed Fusion Processes using Optical Coherence Tomography
In Situ Melt Pool Monitoring and the Correlation to part Density of Inconel ® 718 for Quality Assurance in Selective Laser Melting
In Situ Thermography for the Selective Laser Melting Process
Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing
Industrial Robot Assisted 3D Scanning of Metal Parts for Component Repair Using Additive Manufacturing
Influence of Arcam EB Parameters on Properties in Aluminum Alloy 2024
Influence of Dwell Time on Localized Thermal History and Properties of Directed Energy Deposition (DED)-processed Inconel 718 Thin Walls
Influence of Gage Length on Miniature Tensile Characterization of Powder Bed Fabricated 304L Stainless Steel
Influence of Hatch Spacing on the Superelastic Properties of a Ni-rich SLM Nitinol Shape Memory Alloy
Influence of Process Time and Geometry on Part Quality in Low Temperature Laser Sintering
Influence of Shot Peening on Mechanical Behavior and Toughness of ABS Parts Manufactured by Fused Filament Fabrication (FFF)
Influence of Shot Peening on Tensile Strength and Deflection of Polymer Parts Made using Mask Image Projection Stereolithography (MIP-SLA)
Influence of the Ratio between the Translational and Contra-rotating Coating Mechanism on Different Laser Sintering Materials and their Packing Density
Initial Investigation of Selective Laser Sintering Laser Power vs. Part Porosity Using In-Situ Optical Coherence Tomography
Integrated Additively Manufactured Hydraulic and Electronic Passageways in Novel Robotic Systems
Integrated Locating Features for Precision Machining and Assembly of Additively Manufactured Components
Integrating AM into Existing Companies: Selection of Existing Parts for Increase of Acceptance
Integrating Interactive Design and Simulation for Mass-Customized 3D-Printed Objects – a Cup Holder Example
Interface Bonding and Fracture Behavior of Direct Laser Deposited AISI 4140 Powder on AISI 4140 Substrate
Investigating Material Degradation through the Recycling of PLA in Additively Manufactured Parts
Investigating the Effect of Nozzle Residence Time on Properties of Thermoplastic Parts Produced by Material Extrusion AM
Investigating the Impact of Functionally Graded Materials on Fatigue Life of Material Jetted Specimens
Investigation of Build Strategies for A Hybrid Manufacturing Process Progress on Ti-6Al-4V
Investigation of Mechanical Properties for Hybrid Deposition and Micro-rolling of Bainite Steel
Investigation of Optical Coherence Tomography Imaging in Nylon 12 Powder
Large-area, High-resolution Additive Manufacturing of Elastomers with Scanning Mask Projection Vat Photopolymerization
Laser powder bed fusion fabrication and characterization of crack-free aluminum alloy 6061 using in-process powder bed induction heating
Laser Power Control in SLS
Laser Sintering of Polyetherethrerketone with Low-temperature Process
Late News Poster: Elucidating the Fluid-Particle Interaction in Binder Jet Additive Manufacturing
Launching a Masters Degree on Metal Additive Manufacture
Layer-to-Layer Control of Laser Metal Deposition
Linking Process Parameters to Part Defects through In-Process Sensor Signatures in Laser Powder Bed Fusion (LPBF).
Long-term Effects of Temperature Exposure on SLM 304L Stainless Steel
Machine Learning-based Monitoring of Advanced Manufacturing
Machine Learning-enabled Powder Spreading Process Maps for Metal Additive Manufacturing (AM)
Machine Learning for Defect Detection for PBFAM using High Resolution Layerwise Imaging Coupled with Post-Build CT Scans
Magnetohydrodynamic Drop-on-Demand Liquid Metal 3D Printing
Magnetohydrodynamic Liquid Metal Droplet Jetting of 4043 Aluminum
Material Informed Digital Design Demonstration for Additive Structures
Material Selection on Laser Sintered Stab-resistant Body Armor
Materials Properties Evolution during Photopolymerization
Measurement and Prediction of Distortions in a 17-4 PH Stainless Steel Part Produced by Laser Powder Bed Fusion
Measuring the Curing Parameters of Photopolymers used in Additive Manufacturing
Mechanical Assessment of a LPBF Nickel Superalloy using the Small Punch Test Method
Mechanical Performance of Selective Laser Melted 17-4PH Stainless Steel under Compressive Loading
Mechanical Properties and color of TPE parts as function of temperature history in selective laser sintering process
Mechanical Properties of 304L Metal Parts made by Laser-foil Printing Process
Mechanical Property Variation in Metal Lattice Structures
Mechanics of the Separation Process in Constrained-Surface Stereolithography
Melt Pool Dimension Measurement In Selective Laser Melting Using Thermal Imaging
Melt Pool Image Process Acceleration Using General Purpose Computing on Graphics Processing Units
Mesoscopic Multi-layer Simulation of Selective Laser Melting Process
Metal Matrix Composites formed by Titanium Carbide and Aluminum Net Shaped via Binder Jetting
Metal Matrix Nanocomposite Powders for Laser Powder Bed Fusion
Metallic Additive Manufacturing at the Army Research Laboratory
Metallic Components Repair Strategies using the Hybrid Manufacturing Process
Method for the Evaluation of Economic Efficiency of Additive and Conventional Manufacturing
Microheater Array Powder Sintering: A Novel Additive Manufacturing Process
Microstructural Origins of Spatially Tailored Functional Response in NiTi SMAs
Microstructure and Crack Distribution of Fe-based Amorphous Alloys Manufactured by Selective Laser Melting
Microstructure and Indentation Hardness of SLE-Deposited Rene80 Superalloy with Post-process Heat Treatment
Microstructure and Mechanical Behavior of AlCoCuFeNi High-entropy Alloy Fabricated by Selective Laser Melting
Microstructure Comparison of 316L Parts Produced by Different Additive Manufacturing Processes
Microwave Measurements of Nylon-12 Powder Ageing for Additive Manufacturing
Modeling Microstructure Evolution and the Effects of Texture on Mechanical Properties in Additively Manufactured Metals
Modeling of crack propagation in 2D brittle finite lattice structures assisted by additive manufacturing
Modeling of Electron Beam Selective Melting: from Powder Bed Spreading to Melting
Modeling of Low One-photon Polymerization for 3D printing of UV-curable Silicones
Modeling the Effect of Inter-layer Time on the 3D Microstructure and Residual Stress in LENS Parts
Modelling Nanoparticle Sintering in a Microscale Selective Laser Sintering Process
Modelling Powder Flow in Metal Additive Manufacturing Systems
Molten Pool Behavior of Al2O3 in Single-track and Single-layer during Selective Laser Melting
Monitoring of Single-track Degradation in the Process of Selective Laser Melting
Multi-Level Uncertainty Quantification in Additive Manufacturing
Multi-material Structural Topology Optimization under Uncertainty via a Stochastic Reduced Order Model Approach
Multi-process Advanced Manufacturing for 3D-printed Multi-functional Devices
Multi-robot Arc-based Additive Manufacturing for High Material Deposition Rates
Multi-sensor Investigations of Optical Emissions and Their Relations to DED Processes and Quality
Multiphysics Computational Framework for Selective Laser Sintering Process of Polymers
Multiscale Analysis of Cellular Solids Fabricated by EBM
Multiscale Study of the Electron Beam Selective Melting: Morphologies and Material Properties
Multiscale Voxel-Based Design and Additive Manufacture of Composite Components
Multisystem Modeling and Optimization of Solar Sintering System
Multivariate Calibration of a FE Melt Pool Simulator for Selective Laser Melting
Naval Additive Manufacturing S&T
Net Shaping of Steel-tungsten Metal Hybrid via Binder Jet Additive Manufacturing
New Filament Deposition Technique for High Strength, Ductile 3D Printed Parts
NEW PRESENTATION: Evaluation of Microstructure and Defects in Additively Manufactured Ceramics
NEW PRESENTATION: High-throughput Desktop-scale Extrusion Additive Manufacturing
Next Generation Aerosol-Based Printing for Production-Level Printed Electronic
Novel Approach for Optimizing Infill Density of an Additively Manufactured Structure
Novel Filament Composition for Fused Deposition of Ceramics
Novel Graded Honeycombs Fabricated by Material Extrusion Additive Manufacturing
Numerical Investigation of Stiffness Properties of FDM Parts as a Function of Raster Orientation
Numerical Modeling of High Resolution Electrohydrodynamic Jet Printing using OpenFOAM
Numerical Simulation of Solidification in Additive Manufacturing of Ti-alloy by Multi-Phase-Field Method
Numerical Simulation of Temperature Fields in Powder Bed Fusion Process by using Hybrid Heat Source Model
Numerical Study of Cover Gas Flow in Powder Bed-based Additive Manufacturing
Numerical Study of Keyhole Formation in Selective Laser Melting of Ti6Al4V
Observing the Location Dependence of Microstructure in Selective Laser Melted NiTi
On the Effect of Building Direction on the Microstructure and Tensile Properties of SLM NiTi
On the Simulation Scalability to Predict the Distortion and Residual Stress of Bridge Structures in Selective Laser Melting
On the Use of X-ray Computed Tomography for Monitoring the Failure of a Two-bar Small Specimen Manufactured by Selective Laser Melting
Opening the Architecture of AM with Hybrid Manufacturing Technologies
Optimising Thermoplastic Polyurethane for Desktop Laser Sintering
Optimization of Adhesively Joined Laser-sintered Parts
Optimization of Binder Removal for a Fused Deposition of Ceramics System
Optimization of Build Orientation for Minimum Thermal Distortion in DMLS Metallic Additive Manufacturing
ORNL Slicer: A Novel Approach for Additive Manufacturing Tool Path Planning
Performance Characterization of Process Monitoring Sensors on the NIST Additive Manufacturing Metrology Testbed
Phase Field Modeling of Microstructure Evolution during Selective Laser Melting of Inconcel 718
Photoelastic Analysis of Additive Manufactured Borosilicate Glass Walls
Pneumatic System Design for Direct Write 3D Printing
Porosity and Mechanical Properties of Selected Laser Melted 316L Stainless Steel
Porosity Development and Cracking Behavior of Al-Zn-Mg-Cu Alloys Fabricated by Selective Laser Melting
Position-dependent Powder Properties in the Metal Powder Bed Laser Melting Process
POSTER: Magnetohydrodynamic Drop-on-Demand Liquid Metal 3D Printing
Powder Bed Fusion Metrology for Additive Manufacturing Design Guidance
Powder Preparation for Indirect Selective Laser Sintering of Alumina
Powder Removal Methods for Electron Beam Melting
Predicting Meltpool-Scale Phenomena in Full-Scale Parts made using Metal Laser Sintering
Predicting Sharkskin Instability in Extrusion Additive Manufacturing of Reinforced Thermoplastics
Prediction of Fatigue Lives in Additively Manufactured Alloys based on the Crack-growth Concept
Prediction of Grain Morphology in Electron Beam Melting of IN718 Superalloys
Prediction of the Elastic Response of TPMS Cellular Lattice Structures using Finite Element Method
Predictive Modeling Tool for Performance and Life Analysis of Metal-Based Additive Manufacturing Parts
Preliminary Investigation of Pulsed Thermography for Online Process Monitoring in Additive Manufacturing
Preliminary Study of Large Area Polymer Sintering with Projection Sintering
Probabilistic Fatigue Life Prediction of an SLM Ti64 Component
Process -- Property Relationships in Additive Manufacturing of Nylon-fiberglass Composites using Taguchi Design of Experiments
Process Modeling and In-situ Monitoring of Photopolymerization for Exposure Controlled Projection Lithography (ECPL)
Process Temperature Monitoring with Physics-based Compressive Sensing
Processability of Fe-based Bulk Metallic Glass using Direct Metal Laser Sintering and Electron Beam Melting
Processing Sugar on a Desktop Powder Bed Fusion System
Progress Toward the use of Elemental Aluminum-Silicon-Magnesium Mixtures in Selective Laser Melting
Projection-based Topology Optimization Algorithms for Manufacturing Design Constraints in Powder Bed Fusion and Vat-based Additive Manufacturing
Qualification Challenges with Additive Manufacturing in Space Applications
Quantifying Accuracy of Metal Additive Processes through a Standardized Test Artifact
Quantitative Texture Prediction of Epitaxial Columnar Grains in Additive Manufacturing
Ramp-Up-Management in Additive Manufacturing – Technology Integration in existing Business Processes
Rapid 3D Printing of Scale-up Vascularized Cell-laden Tissue
Rapid Prototyping of EPS Pattern for Complicated Casting
Rational Decision-Making for the Beneficial Application of Additive Manufacturing
Reactive Inkjet Printing Approach towards 3D Silicone Elastomeric Structures Fabrication
Real-Time Layer-by-Layer Ultrasonic Treatment of Additively Manufactured Metallic Materials
Real-Time Metrology for Photopolymer Additive Manufacturing with Exposure Controlled Projection Lithography
Real-Time Process Measurement and Feedback Control for Exposure Controlled Projection Lithography
Recapitulation on Laser Melting of Ceramics and Glass-ceramics
Recyclable 3D Printing of Vitrimer Epoxy
Reducing Mechanical Anisotropy in Extrusion-Based Printed Parts
Reduction Expansion Synthesis of Thin Metal Films
Relating Processing of Selective Laser Melted Structures to their Material and Modal Properties
Relationship of Powder Feedstock Variability to Microstructure and Defects in Selective Laser Melted Alloy 718
Residual Stress Analysis in Supportless Overhanging Surfaces
Residual Stress Analysis of Additively Manufactured 17-4 PH Steel
Residual Stress Analysis of Thin Wall Blade Structure Manufactured by Direct Metal Laser Sintering (DMLS)
Residual Stress Reduction in LENS 3D Printed Metal Parts
Residual Stresses in Direct Metal Laser Sintered Stainless Steel Parts
Reverse Engineering a Transhumeral Prosthetic Design for Additive Manufacturing
Review of AM Simulation Validation Techniques
Review of Ultra-High Speed Imaging of Powder Bed Fusion Additive Manufacturing Processes
Rheological Evaluation of High Temperature Polymers to Identify Successful Extrusion Parameters
Roadmap for Binder Jet Additive Manufacturing
Roadmap for Metal Matrix Composite Development for Binder Jetting
Scanning Strategies in Electron Beam Melting to Influence Microstructure Development
Screening New Polymers for Powder Bed Fusion (PBF) Additive Manufacturing (AM) via Calorimetric Optical Absorption Measurements
Selection and Installation of High Resolution Imaging to Monitor the PBFAM Process, and Synchronization to Post-Build 3D Computed Tomography
Selective Laser Melting of Al7075 by Application of Powder Bed Preheating
Selective Laser Melting of AlCu5MnCdVA: Formability, Microstructure, and Mechanical Properties
Selective Laser Melting of Bismuth Telluride and Half-Heusler Thermoelectric Materials
Selective Laser Melting of Novel Titanium-Tantalum Alloy as Orthopedic Biomaterial
Selective Laser Melting of Pure Copper
Selective Separation Shaping of polymeric material
Selective Separation Shaping (SSS) – Large Scale Fabrication Potentials
Simulation of Planar Deposition Polymer Melt Flow and Fiber Orientation in Fused Filament Fabrication
Simulation of Spot Melting Scan Strategy to Predict Columnar to Equiaxed Transition in Metal Additive Manufacturing
Skill-based Education of 3D Printing Technologies at DEI: Bringing Additive Manufacturing to the Classroom
Small-scale Mechanical Properties of Additively Manufactured Ti-6Al-4V
Smart Parts Fabrication using Powder Bed Fusion Additive Manufacturing Technologies
Software Tools for Rapid 3D Electronics Fabrication
State of the Art and Qualification Plans for Wire + Arc Additive Manufacture
Static and Fatigue Properties of Ti-6Al-4V Deposited by the WAAM Process with and without In-process Cold Work
Strength of Micro-Computed Tomography as an Indicator of Process History and Estimator of Mechanical Performance in Additively Manufactured Stainless Steel
Study of Printing Dynamics during Inkjetting of Cell-laden Bioink
Studying Chromium and Nickel Equivalency to Identify Viable Additive Manufacturing Stainless Steel Chemistries
Supportability of A Highly Viscous Slurry in a New Stereolithography-based Ceramic Fabrication Process
Surface Finish of Overhangs in Laser Powder Bed Fusion Additive Manufacturing of 17-4 Stainless Steel
Surface Integrity of Inconel 718 by Hybrid Selective Laser Melting and Milling
Surface Roughness and Resolution Refinement of Vacuum Electronic Devices using Fine Distributions of OFHC Copper with Electron Beam Melting
Synergistic Integration of Hybrid Processes and Multiple Technologies
Syringe Dispense of Copper Paste with Formic Acid Cure
Tailoring Commercially Pure Titanium Using Mo2C During Selective Laser Melting
Technological Challenges for the Automotive Series Production in Laser Beam Melting
Temperature and Humidity Variation Effect on Process Behavior in Electrohydrodynamic Jet Printing of a Class of Optical Adhesives
Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion
The Application of Composite Through-thickness Assessment to Additively Manufactured Parts
The Assessment of Residual Stress in Powder Bed Fusion Components Using a Novel Residual Stress Analysis Component, the Three-Prong Method
The Change of Thermal Properties and Microstructure of an AM Fabricated AlSi10Mg Alloy during Thermal Annealing
The Conductive Voxel: Conductive Features within Polymer Parts Using Multi Jet Fusion
The Effect of Polymer Melt Rheology on Predicted Die Swell and Fiber Orientation in Fused Filament Fabrication Nozzle Flow
The Effect of Powder on Cooling Rate and Melt Pool Length Measurements using in situ Thermographic Techniques
The Effect of Process Parameters and Mechanical Properties of Direct-energy Deposited Stainless Steel 316
The Effect of Process Parameters and Texture Evolution on Residual Stress in Selective Laser Melting of Ti-6Al-4V
The Effect of Scanning Strategy on Residual Stress in Metal Parts Fabricated via Selective Laser Melting (SLM) Technique
The Influence of Exposure Time on Energy Consumption and Mechanical Properties of SLM-fabricated Parts
The Mechanical Performance of Triply Periodic Minimal Surface Lattice Structures
The Mechanical Voxel: Variable Rigidity Polymer Parts Using Multi Jet Fusion
The Processing-Structure Relationship for Surface Roughness in Additively Manufactured IN 718
The Use of Electropolishing Surface Treatment on IN718 Parts Fabricated by Laser Powder Bed Fusion Process
Thermal Concentrator Design Enabled by Multi-Material 3D Metal Printing
Thermal History Correlation with Mechanical Properties for Polymer Selective Laser Sintering
Thermal modeling of 304L Stainless Steel Selective Laser Melting
Thermal Modelling of Large Scale Polymer Additive Manufacturing
Thermal Property Measurement Methods and Analysis for AM Solids and Powders
Thermal Recording Processing and Analysis for SLM
Thermal Simulation and Experiment Validation of Cooldown Phase of Selective Laser Sintering (SLS)
Thermo-mechanical Properties of 3D-printed Epoxy Nanocomposites
Thermomechanical Analysis of Direct Metal Laser Melting via Line Heat Source Model
Time-Optimal Scan Path Planning Based on Analysis of Sliced Geometry
Topological Optimization and Methodology for Fabricating Additively Manufactured Lightweight Metallic Mirrors
Topology Optimization for 3D Material Distribution and Orientation for Additive Manufacturing
Topology Optimization of an Additively Manufactured Beam
Topology Optimization of Variable-density Lattice Structure for Highly Efficient Convective Heat Transfer
Torsional Strength at the Interface of an Additively Manufactured Tool and its Substrate
Towards a Robust Production of FFF End-user Parts with Improved Tensile Properties
Towards Defect Detection in Metal SLM Parts Using Modal Analysis "Fingerprinting"
Towards Real-time Regulation of Build Geometry in a Directed Energy Deposition Additive Manufacturing System using Vision-based Feedback Control
Trajectory Effect on Part Height for Laser Metal Deposition
Ultrasonic Vibration-assisted Direct Laser Deposited TiB Reinforced Ti Composites with a Three-dimensional Quasi-continuous Network Microstructure
Understanding and Engineering of Natural Surfaces with Additive Manufacturing
Understanding the Digital Thread: Investigating the Amount of Data and File Types Generated during Additive Manufacturing
Understanding the Effect of Process Parameters on Tensile Strength and Dimensional Accuracy of ABS Parts Made using Fused Filament Fabrication (FFF)
Understanding the Effect of Process Parameters on Tensile Strength of Polymer Parts Made using Mask Image Projection Sterelithography (MIP-SLA)
Understanding the Effects of Post-Processing on a High-Performance All-Aromatic Polyimide Fabricated Using Vat-Photopolymerization
Using Additive Manufacturing Techniques as an Alternative Method to Spray Deposit Metallized Material
Using Laser Ultrasonic Testing to Detect Sub-surface Defects in Metal Laser Powder Bed Fusion Components
Using Multi-Axis Material Extrusion Additive Manufacturing to Improve Part Mechanical Properties through Printed Surface Reinforcement
Using Skeletons for Void Filling in Large-Scale Additive Manufacturing
Visual Sensing and Image Processing for Error Detection in Laser Metal Wire Deposition
Weldability of Additively Manufactured Metal Components
Wire + Arc Additive Manufacture of Unalloyed Tantalum

Questions about ProgramMaster? Contact