ProgramMaster Logo
Conference Tools for Materials Science & Technology 2019
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting Materials Science & Technology 2019
Symposium Joining of Advanced and Specialty Materials XXI
Organizer(s) Mathieu Brochu, McGill University
Anming Hu, University of Tennessee
Hiroaki Mori, Osaka University
Yuri Hovanski, Brigham Young University
Darren Barborak, WeldQC inc
Akio Hirose, Osaka University
Peng He, Harbin Institute of Technology
Zhiyong Gu, University of Massachusetts Lowell
Zhenzhen Yu, Colorado School of Mines
Scope Abstracts and papers for the 21st Symposium on Joining of Advanced and Specialty Materials (JASM XXI) are solicited on fundamentals and applications, and experimental, analytical, and computational studies related to (but not limited to): Welding and joining of conventional and advanced metallic alloys, ceramics, plastics, and composites; Welding and joining processes including arc welding, high energy density and hybrid processes, additive manufacturing, friction stir welding, solid-state joining, brazing and soldering, micro/nano-joining for microelectronic and micromechanical applications, joining for alternative energy sources; Welding metallurgy, weldability, characterization of microstructure, mechanical behavior and service performance of welds and welded structures for power generation, oil and gas, petrochemical, aerospace, automotive, and defense applications; Welding repair of critical structures, surface modification and weld overlays for corrosion, erosion, wear protection, and structural integrity.
Abstracts Due 04/05/2019
Proceedings Plan Undecided

A Challenge in Multi-Material Structures with Automotive Metal Fasteners
A Meshless Approach for 3D Modeling of Linear Friction Welding Process
Additive Manufacturing of Bimetallic Structure Using Laser Engineered Net Shaping (LENSTM)
Air Braze Tape for High Temperature Electrochemical Devices
Austenite Transformation in Duplex Stainless Steels Under Fast Cooling Rates
Basic Study on Numerical Analysis of Friction Stir Welded Dissimilar Joint with New Particle Method based on MPS
Chemistry Sensitive Modelling of the Microstructure Evolution in the HAZ of Line Pipe Steels
Computational Modeling of Weldability Tests for Quantification of Material-Specific Properties Related to Weldability
Development of a numerical model for dissimilar lap joint FSW by using particle method
Development of dissimilar metal joints porosity evaluation method
Direct Fabrication of Bimetallic Ti6Al4V+Al12Si Structures via Additive Manufacturing
Dissimilar Joining of Steel and Aluminum Alloys by Electrically Assisted Pressure Joining
Effect of aging under high-temperature and high-humidity environment on adhesion strength and change in chemical structure of structural adhesive
Effect of Nb Interlayer on the Stability Against High-temperature Exposure in Impact Spot Welding of Ti to Stainless Steel
Effect of Post Weld Heat Treatment on Microstructure and Mechanical properties of Linear Friction Welded Ti-6Al-4V
Effect of process parameters on formation of intermetallic compounds and internal defects in FSW of aluminum alloys and steels
Effect of surface roughness on bonding behavior of steel and Ni by ultrasonic welding
Effect of Weld Designs on Steel And Ductile Iron Laser Weld Properties
Effects of Weld Cladding Processes on Wear Behaviour of Overlays for Mining Applications
Fabricate of Nanomaterials using Microreactor-Assisted Printing for Joining
Friction Stir Welding of Creep Strength Enhanced Ferritic Steels for Power Plant Applications
High frequency ultrasonic resistance spot joining of advance high strength TRIP 780 Steel.
High speed Friction stir lap welding of Al alloys
Impact welding of wrought vs. additively manufactured ultra-high-strength stainless steel
Influence of the process parameters on the transformation behavior of duplex stainless steel in laser beam welding with highest focusability
Interfacial microstructure of Ti - STS dissimilar joints brazed with Zr-Ti-Cu-Ni metallic glass filler and intermediate layers
Interfacial reaction and strengthening mechanism of YIG/MTC joint brazed by bismuth-based glass
Investigation of 740H fusion weld process using new advanced Cold-Metal Transfer process and weld process simulation with Gleeble 3500
Investigation of Corrosion Resistance of Nickel-based Brazing Filler Metal for Stainless Steel for Heat Exchanger
Investigation of Mechanical Properties of Sn-5Sb and Sn-6.4Sb-3.9Ag High-temperature Lead-free Solder
Investigations on welding characteristics of additively manufactured Ti6Al4V and SS304
Joining of Additively Manufactured Titanium with Different Surface Structures and Fiber-reinforced Polyetherketone (PEK) for Lightweight Design Applications
Joining of carbon fiber reinforced composites to AZ31B using friction self-piercing riveting
Joining of Magnesium to Carbon Fiber Reinforced Polymers using Friction Stir Interlocking technique
Laser direct-writing of copper electrodes and sensors on flexible substrate
Laser welding of Te nanowires for single nanowire field effect transistor
Load-Deflection Relationship and Feedback Position Control to Compensate for the welding System During Friction Stir Welding
Machine Learning Application for Active Exploration of Weld Sequence Scenarios
Magnetic-assisted Assembly and IR Soldering of Multi-segmented Nanowires for Nanodevices
Material Properties of Friction Stir Spot Welded Joint of Steel and Heat-treatable Aluminum Alloys
Mechanical Performance of Welded INCONEL® Alloy 740H ® Product Forms
Microstructure and mechanical properties of friction-stir-welded beryllium-copper alloy joints
Microstructure and mechanical/electrochemical behavior of friction stir butt welded joint of dissimilar aluminium and steel alloys
Modeling of local flow stresses near the tool in friction stir welding of 2xxx series aluminum
Nickel nanoparticles for boron-free and silicon-free nano-transient liquid phase bonding of Inconel 718
Numerical Simulation of Temperature Distribution and Material Flow During Friction Stir Welding of Magnesium Alloy
Phase Transformations and Mechanical Properties of a 10 wt% Ni Steel Welding Consumable
Physical and numerical simulation of Friction Stir Welding for Al-based alloys
Process-structure-property relationship in dissimilar Al-high strength steel impact spot welds
Reactive and Non-Reactive Nanomultilayers for Advanced Joining Applications
Reducing Cycle Time of Refill Friction Stir Spot Welding
Short pulsed laser-induced grain refining in weld metal during CW laser welding of 2024-T3 aluminum alloy
Stress Relief and Service Age Cracking in Austenitic Stainless Steels and Nickel Based Superalloys
Study of Solid-State Reactions in Diffusion Bonded Inconel 600 to SiC with Metallic Interlayers
Study of Variation in Mechanical Properties from Welding Low Density Fe-Mn-Al-C Steel for Armor Applications
The Effects of Pre-pulse & Profile force on Nugget growth and Weldability for Resistance Spot Welding of A6014 alloy
Theoretical Analysis of Keyhole Dynamics Based on Calculation of Coupled Multiphase Transfer during Laser Beam Welding for Aluminum
Thermal Modeling of Continuous Drive Friction Welding for Al6061
Transient microstructure evolution during friction stir processing of dual phase advanced high strength steel.
Weld Seam Characteristics of Roll Formed TRIP690 Tubes
Weldability of HAYNES 244 Alloy – A New Low Thermal Expansion Alloy

Questions about ProgramMaster? Contact