ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Additive Manufacturing: Alternative Processes (Beyond the Beam)
Sponsorship TMS Materials Processing and Manufacturing Division
TMS: Additive Manufacturing Committee
TMS: Powder Materials Committee
Organizer(s) Paul D. Prichard, Kennametal Inc.
Matthew Dunstan, U.S. Army Research Laboratory
Peeyush Nandwana, Oak Ridge National Laboratory
Nihan Tuncer, Desktop Metal
James D. Paramore, U.S. Army Research Laboratory
Scope Additive manufacturing comprises a breadth of processes, which have significant economic potential and technical challenges. Significant resources have been committed to laser powder bed fusion and electron beam powder bed fusion processes. However, additive processes which produce green components and require consolidation processes such as sintering and HIP eliminate many short comings such as slow build rates, residual stress and print support structures. In addition, the green part additive technologies build on existing process technology from the powder materials and ceramics, which enable the additive processing of non-weldable materials. These processes include but are not limited to: binder jetting, material extrusion, filament process, nano-Inkjet printing and selective laser sintering. However, these processes introduce other challenges such as: feedstock development, alloy design, depowdering, powder recycling, binder design, debinding, full consolidation, microstructural development, sintering distortion, sintering support structure design. This symposium will explore the interrelationships between the various aspects on the process variables, properties, application performance, economics and functionality of these non-beam additive processes.
Abstracts Due 07/15/2019
Proceedings Plan Planned: Supplemental Proceedings volume
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

3D-printing and consolidation of 316L stainless steel powder components
3D-Printing via Binder Jetting and Consolidation of Nano Alumina Bone Scaffold Prototypes
3D Printing Bulk Metallic Glass Alloys with Ultrasonic Additive Manufacturing
A comparative microstructural study on wire+arc additively manufactured Copper alloy due to the use of different welding methods
A novel Direct Writing technology to fabricate aluminium matrix composite
Additive Friction Stir Deposition for Solid-State Additive Manufacturing of Metals and Metal Matrix Composites
Additive Friction Stir Deposition: Microstructural Control Sensitivity
Additive Manufacturing of Aluminium Using Friction Stir Deposition
Additive manufacturing of high-value metal parts through shaping-debinding-sintering
Additive Manufacturing of Photocatalytic Materials for Solar Water Disinfection
Beyond the Powder-bed: Fabricating Microscale Three-dimensional Metallic Structures Without Support using Nanoparticle 3D Printing
Characterization of 17-4 PH processed via Bound Metal Deposition (BMD)
Development and Validation of Sub-Scale Tensile Tests for Characterization of Additively Manufactured Metals
Development of Tuned Composites based on Metallic Particles for Advanced 3D-Printing by Fused Deposition Modeling
Effect of counter-gravity 3D printing on PLA interlayer fracture energy
Effect of print parameters on dimensional accuracy and sintering behavior of binder jet 3D printed water and gas atomized Inconel 625
Effect of print processing parameters on the green part properties and densification behavior in binder jet 3D printed Co-Cr biomaterials
Effects of Post-processing Treatments on ABS FDM Parts
Effects of printing parameters on green and final part density of binder jet printed WC-Co
Effects of Zener-Hollomon parameter and strain on the heterogeneous microstructual evolution of cold-sprayed coatings
Evolution of Pore Distribution in the Binder jetting of WC-Co
Experimental Demonstration of Additive Manufacturing and Assembly in Space by Thermal Vacuum Testing
Fabrication of sub-microscale metallic glass particles and wires via high pressure atomization
Gravity Influence on Sintering of 3D-Printed Components
Impacts of Friction Stir Processing on Microstructure and Corrosion Properties of DMLS-AlSi10Mg
Integrated 3D printing with microwave sintering: A paradigm - shifting concept for additive manufacturing of magnesium alloys
Material property comparison of parts produced using binder jet 3D printing with water and gas atomized powders
Mechanical Property and Characterization of Anodized AA6061 after Additive Friction Stir-deposition
Multi-physics modeling framework of binder jetting process
Multifunctional Binder for Binder Jet Additive Manufacturing
Novel Method in Additive Manufacturing of Metal Matrix Composites reinforced by carbon particles
On the interaction and forms of adhesion between various substrate materials and molten metal droplets produced by the drop-on-demand technology MetalJet
Portland 3D printing of Portland cement pastes with additions of kaolin, superplastificant, and calcium carbonate
Powder Casting: Producing Bulk Metal Components from Powder without Compaction
Process Optimization of Cold Spray Deposited Steel and Iron Blended powders onto Steel Substrates Using Nitrogen Carrier Gas
Processing Parameters for H13 Utilizing Binder Jet Additive Manufacturing
Production of teaching materials through 3D printing as support for educational processes related to the sciences, heritage and culture
Selective sintering-based fabrication of fully dense complex shape parts
Sintering Kinetics of Particle-Based Ink Extrusion 3D Printed Nickel Scaffolds
Surface Characterization of IN718 Powder Stock and Influence on Net-Shape HIP Microstructure
Temperature dependent thermal conductivity of metallic powder alloys for additive manufacturing
The Effect of Sintering Condition on the Microstructure Evolution of Binder-Jet Printed IN625 Alloy
Thermal analysis of Wire Arc Additive Manufacturing (WAAM)
Topology Optimization-based Design Customized for Alternative AM Processes
Understanding Mechanisms Behind Morphological Changes in Gas Atomized Powders After Laser Irradiation
Wall thickness effects on dimensional variation, microstructure, and mechanical properties in stainless steel samples manufactured using a bound metal deposition (BMD) sintering process
Wire+arc additive manufacturing for fabrication of bimetallic additively manufactured structures


Questions about ProgramMaster? Contact programming@programmaster.org