ProgramMaster Logo
Conference Tools for Materials Science & Technology 2016
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting Materials Science & Technology 2016
Symposium MS&T16 Poster Session
Abstracts Due 03/15/2016
Proceedings Plan Undecided

A-10: Microstructures of Low-C and Medium-C Steel Powders Additively Deposited on Cast Iron Using Directed Energy Deposition (DED) Technique
A-11: Open Material Database for Additive Manufacturing (AM)
A-12: Residual Stress in Direct Metal Laser Sintered Steel powders
A-13: The Microstructural Evolution of Powder Aluminum Alloys after Thermal Processing
A-14: The Effect of Post Processing Heat Treatment on Improving Mechanical Properties of 17-4 PH Stainless Steel Additively Manufactured via Laser Powder Bed Fusion
A-15: Investigation for Bionic-Structural Design of Titanium Alloy Produced Using Additive Manufactured Forming, and Resulting Microstructure and Bioreactor Characteristic
A-1: Direct Laser Deposition of Nickel-Base Superalloy for Surface Coating
A-2: Fabrication and Thermal Properties of Aluminum Matrix Composites Reinforced with Molybdenum Carbide-coated Graphite Fibers
A-4: A Combinatorial Assessment of Complex Concentrated Alloys / High Entropy Alloys
A-5: An Alternative Processing Route for Historically Process Incompatible Metal Alloys
A-6: Laser Additive Processing of Magnetic Alloys from Elemental Blends
A-7: Strengthening Weld-based Additive Manufacturing Through Age-hardened Supersaturated Alloys
A-8: Tensile Property of the AISI H13 Tool Steel Deposited by the Direct Energy Deposition Process
A-9: Thermodynamic & Kinetic Model Application to Strengthening Mechanisms of Aluminum Alloys for Additive Manufacturing
B-1: Bio-mediated Materials Fabrication: Exopolysaccharides as Structural Templates
B-3: Guided Biotemplating: Phototactic Structuring of Polysaccharides by Microalgea
B-4: Load-to-failure of Composite Bone Following Removal of Proximal Femoral Fixation Hardware
B-5: Model Biomimetic Dental Composites: Processing and Mechanical Properties of Glass Fiber Model Systems
B-6: Grain Refinement and Biodegradation of Mg-RE Alloy for Orthopedic Implant Applications: Process-Structure-Functional Property Relationship
B-7: Tribological Performance and In Vivo Response of Laser Processed CoCrMo-CaP Composites for Load Bearing Implants
B-8: Effects of Strontium and Magnesium on Osteoblast-Osteoclast Co-culture Using Doped Hydroxyapatite Plasma Coatings
B-9: Enhanced Osteoblastic Differentiation of Human Bone Marrow-derived Mesenchymal Stem Cells from Strontium Doped Hydroxyapatite Sol-gel Coatings on Titanium Alloys
C-10: Simultaneous Synthesis and Densification of New-type Carbon Nano-fibers (CNF) Dispersed B4C/CNF Composites by Pulsed Electric Current Pressure Sintering (PECPS) and their Mechanical Properties
C-11: Stable Nano Nonstoichiometric Cerium Oxide by DC Thermal Plasma
C-13: Synthesis and Electrochemical Properties of Ni-Ce0.8-xSm0.2ZrxO2-δ Anode for IT-SOFC
C-15: Resistive Switching Memory Based on BiFeO3 Nano-island Showing High Resistance Ratio and Nonliearity Factor
C-17: A New Approach to Calorimetry: "Drop-n-catch" Technique Applied to Laser Heated Levitated Alumina and Yttria above 2000 °C
C-18: Comparative Study of the Effect of Zr4+ Dopant on Phase Transformations in Rare-earth Ortho-niobates and -tantalates
C-1: Investigations on BTNN-PVDF Composites of 0-3 Connectivity
C-20: Experimental Study of the Effect of La2O3 on the Liquidus and the Equilibrium Phases of the CaO-SiO2-Nb2O5 Phase Diagram
C-21: Microstructural Damage of α-Al2O3 Induced by High Energy Density Plasma
C-22: Structural Stability Comparing for Lanthanum Chromite-based Perovskites
C-23: Synthesis of Iron-doped Na- β”-Alumina + Yttria-Stabilized Zirconia Composite Electrolytes by a Vapor Phase Process
C-24; Effect of Morphology of Nanostructured ZrO2-WO3 Mixed Anodic Oxide on Electrochemical Energy Storage
C-25: Effect of Water Vapor on Oxidation of Nickel in 8YSZ at High Temperature
C-26: Electroreduction of Yttria Stabilized Zirconia with In-situ Potential Measurement Using Embedded Electrodes
C-27: Enhancement of Photocatalytic Activity of WO3 by ZrO2 for the Treatment of Phenolic Wastewater
C-28: Fabrication of Ceramics/Nano-carbon Composites by Combination of Gelcasting and Argon Sintering
C-29: Microstructural Evolution and Tribocorrosion Performance of Novel Laser Clad Ti-Ni-ZrO2 Composite Coatings in 3.5% NaCl Solution
C-2: Processing of Cu-10 wt% Graphite Composite by High-energy Ball Milling
C-30: Synthesis and Phase Stability of the ZrO2-Y2O3-Ta2O5 Compositions for High Tetragonality Zirconia-based Thermal Barrier Coatings
C-3: Synthesis of Nanopowders of Zirconia through Salt Incorporated Precursors
C-5: Compositional Dependence of Cd-S-Se Quantum Dot Embedded Silicate Glass for LED Color Converters
C-6: The Evolution of the Structure and Physicochemical Properties of Crystals ZrO2-Y2O3, ZrO2-Sc2O3 and ZrO2-Y2O3 -Sc2O3 Obtained by Skull Melting Technique
C-7: Low Temperature Glass Powders for Hermetic Sealing Process in Large Sized Dye Sensitized Solar Cells
C-8: Application of Porous MgTi2O5 Ceramics with Pseudobrookite-type Structure for Diesel Particle Filter Application
C-9: Mechanical Properties of Dense ZrO2-Al2O3 Composites Fabricated Using Various Sintering Methods
D-10: Innovatively Designed Piezoelectric Laminate Composites for DC Magnetic Field Sensing
D-11: Investigation of the Physical Properties in BiFeO3–based Multiferroic Ceramics
D-12:Multifilamentary Conduction Modeling in Heterogeneous Binary Transition Metal Oxides Based RRAM
D-13: Polymers’ Electrical Conductivity and Fractional Order Models
D-14: Room Temperature Negative Capacitance in RF Sputtered BTO/STO Bilayers
D-15: Spectroscopic, Structural and Electrical Properties of Ba(M3+0.05Sb5+0.05Ti0.9)O3 (M = Ho, Er, Lu, Tm)
D-16: Structural Analysis of the Lead-free AlFeO3-Based Magnetoelectric Compositions
D-17: Study of Crystal and Electronic Structures of (Bi1-xNdx)(Fe1-yCoy)O3 Multiferroic Compositions Calculated from X-ray Diffraction Data
D-18: Study of the Dielectric Response of Rare-earth Modified PZT Ferroelectric Ceramics: An Approach to the Diffuse Phase Transition
D-19: Study of the Magnetoeletric Effect in Bi1-xNdxFe1-yCoyO3 Compositions
D-1: Clausius-Mossotti Equation in Correlation with Curie-weiss Law, Fractal Frontiers
D-20: Thermoelectric Properties of BaxSr2-xTiCoO6 Double Perovskites with 0.0≤x≤0.3
D-21: Ab Initio Study of Electronic Structure of Bi1-xNdxFeO3 Magnetoelectric Compositions
D-22: Compound Growth during Reaction Diffusion between Liquid Sn-base Alloys and Solid Fe
D-23: Kinetics of Reactive Diffusion between Sn-Ag Alloys and Ni at Solid-state Temperatures
D-24: Circuit Model for Equilibrium Strains in Semiconductor Multilayers and Superlattices
D-25: Threading Dislocations in InGaAs/GaAs (001) Buffer Layers for Metamorphic High Electron Mobility Transistors
D-26: X-ray Rocking Curve Pendellosung: A Sensitive Tool for the Characterization of Dislocations in Pseudomorphic High Electron Mobility Transistors
D-27: Microstructure Characterization of Reactive Sputtered Cu(In,Ga)(Se)2 Absorber Material
D-28: Design of Graded Buffer Layers for Tandem Solar Cells on GaAs (001) Substrates
D-3: Conversion from p-type to n-type Semiconductor Behavior in BaxSr2-xTi0.8Fe0.8Nb0.4O6 Double Perovskites Based Thermoelectric Material
D-4: Crystal Structure, Microstructure and Piezoelectric Properties of Ca/Zr Co-substituted BaTiO3 Lead Free Piezoceramics
D-5: Development of Sr2TiMoO6 Based Novel Double Perovskites for High Temperature Thermoelectric Power Generation
D-6: Dielectric, Magnetic and Magnetoelectric Characterization of (1-x)[0.90Pb(Zn 1/3 Nb 2/3 )-0.10PbTiO 3/xCoFe<SUB>2</SUB>O<SUB>4</SUB> Particulate Composites</a>]
D-7: Effect of A-site Doping by La, Ba, and Ca on Thermoelectric Properties of Sr2FeTiO6 Double Perovskites
D-9; Improvement of Microwave Dielectric Properties of Bi2(Zn1/3Nb2/3)2O7 Ceramics by Annealing Treatment
Developing Functionally Graded Ti Orthopedic Implants: Compositional Gradient via LENS Process
E-10: In-Situ Low Temperature Neutron Powder Diffraction Study of Mixed CH4-CO2 Gas Hydrates
E-11: Creep-fatigue Crack Growth Mechanisms for Alloy 617 at 800°C
E-12: Effect of Carbonate Concentration on Dissolution Rate of UO2 and Spent Fuel: A Review
E-13: Effect of Laves Phase Precipitating Behavior on the Impact Properties of P92 Heat-resistant Steel
E-14: Ex-situ and In-situ Investigation of Heavy Ion Irradiation Damage in Ti-6Al-4V
E-15: Fuel-cladding Interaction in the Monolithic U-Mo Nuclear Fuels
E-16: High Temperature Behavior of Zirconium Alloys
E-17: Laser Welding of Zr-2.5Nb Alloy to 410 Stainless Steel with Ni Interlayer
E-18: Microstructural Properties of Alloy 718 Processed at Different Experimental Conditions
E-1: Conductive Nanostructured Scaffolds Render Low Local Current Density to Inhibit Lithium Dendrite Growth
E-20: Phase Field Modeling of Irradiation-induced Recrystallization
E-21: Radiation response of a Novel Intermetallic-strengthened Alloy
E-22: Studies of Grain Boundary Regions in Nb Superconductive Accelerating Cavities
E-23: Tailoring W2O3 Nanostructures Using Low Energy High Flux He+ Ion Irradiation
E-24: Experimental and Calculation Investigation on Severe Accidents in PWR Reactors
E-25: Cascade Simulations in Ceramic/Metallic Nano-composites
E-26: Characterization of Radiation Induced Microstructural and Thermoelectric Property Changes in Bismuth Telluride and Half Heusler Materials
E-27: Corrosion Behavior of Advanced Duplex Stainless Steels in High Temperature Steam Environment
E-28: The Effect of Cold Work on the Recrystallization of a Nanostructured Ferritic Alloy
E-29: The Effect of Stoichiometry on the Mechanical Properties of CeO2-x
E-2: Free Standing, Flexible, High Ionic Conductivity Cubic-Li7La3Zr2O12 Ceramic Thin Film Membranes for Lithium Batteries
E-30: The Study of NS3105 Tube Stress Corrosion Behavior in Aqueous Alkali
E-31: The Challenges and Goals of Integrated Waste Treatment Unit
E-32: Examining Durability and Alternative Phase Formation of Ceramic Waste Forms Using Vapor Hydration Testing
E-33: Phosphate Cement Blended with Samarium Oxide as Irradiation Shielding Materials
E-34: X-ray Scattering and Spectroscopy Studies of Nanosheet MnO2 Supercapacitor Electrodes
E-35: Effect of Neutron Irradiation on Friction Stir Processed MA956 and MA754
E-3: Honeycomb TiO2: Self-ordering Titania with Increased Stability, Capacitance and Surface Area.
E-4: Improved Mechanical Properties of Silver-Zinc Batteries Utilizing Current Collector Geometry
E-5: Investigation of Capacity Fading of Li-rich Layered Composite Cathodes based on Structure Considerations
E-6: LiCoNiFeO Nanocrystalline Cathode Particles for Lithium Ion Batteries: Prepared by Ultrasonic Spray Pyrolysis (USP) Method
E-7: Towards a Compliant Energy Storage System for Wearable Technology: High Performance Ag-Zn Chemistry Batteries
E-8: Structural Stability of La0.8Ca0.2Fe1-XCoX(x=0~0.4) Perovskite Oxygen Transport Membrane for Cabon Capture Application
F-10: The Development of Physically Based Atomistic Microstructure: The Effect on the Mechanical Response of Polycrystals
F-11: The Effect of the Grain Size on the Growth Kinetics in the IMC Layer in Fe-Al Binary System
F-12: Anorthite (CaAl2Si2O8)-Aluminium Interface: Kinetics of High-Temperature Interactions
F-13: Ionic Conductivity in Alkali Nitrites and Composite Solid Electrolytes Based on LiNO2
F-14: Study of Isothermal Mass and Charge Transport Properties of La2Ni0.95Al0.05O4.025+δ
F-15: Anisotropic Tailored Thermal Expansion In Martensitic Alloys
F-16: Flow Characteristics of Ultrafine Grained Zircaloy-4 pProcessed by Mutiaxial Forging
F-17: Grain Growth during Cyclic Straining of Copper Films Revealed with In-situ Resistance Measurements
F-18: Low Energy Ion Scattering (LEIS) of Commercial Display Glasses
F-19: Nucleation of Dynamic Recrystallization and Grain Growth in Hot Extruded Mg-Ce Alloys
F-1: Roles of Ag Addition in FePt L10 Ordering Transition Investigated by In-situ Heating HRTEM Observations
F-20: Relating Anisotropy and Strain-induced Crystallinity to Processing and Glass Transition Temperature of Polypropylene and Poly(Ethylene-terephthalate) Plastic Cups
F-21: Effect of Sulfur Content on Fatigue Strength of AISI 4140 Steel
F-22: Behaviour of Asphalt Concrete Beyond Its Limit of Elasticity
F-23: Influence of Quenching Processes on Microstructure and Mechanical Properties of 800MPa High Strength Steels
F-24: Structure Property Relationship of Cationic Doping in Ca12Al14O33 Nanocages
F-25: Compact Forced Simple-shear and Compact Forced Double-shear Applications for Shear Localization in Materials
F-26: Modeling the Hydroforming of a Large Grain Niobium Tube
F-27: Numerical Simulation of Inclusion Aggregation and Removal in a Bottom Gas-injected Ladle during Molten Steel Deoxidation
F-28: The Method for Determination of the Influence of the Stress-strain State of Metal on the Structural Transformations in the Low-alloy Steel
F-29: Thermal Non-Equilibrium Effects on Nickel Solid-Liquid Interface
F-30: Stochastic Modeling for Prediction of the Columnar to Equiaxed Transition during Solidification of Magnesium-based Alloys
F-31: Multiscale Numerical Model of Nanoindentation Test of PLD sample
F-32: Simulation of Tube Drawing Textures in NiTi Using Elasto-plastic Self Consistent Algorithm
F-33: Maximum Likelihood Parameter Estimation in Crystal Plasticity Finite Element Method Using Particle Filter
F-3: Multi-phase-field Study of Cube Recrystallization Texture of Aluminum Alloy
F-4: Non-isothermal Nanocrystallization Kinetics of FINEMET Type Alloys Using a Direct Extension of JMAK Theory
F-6: Modeling Material Interfaces with Hybrid Adhesion Method
F-7: Coherency Strain Reduction in Particles on a Substrate as a Driving Force for Solute Segregation
F-8: Grain Boundary Structure-property Relationships: Single Disorientation Axis Trends
F-9: Partially Agglomerated Metallic Thin Films Formed by Annealing of Solid Solution Nanoparticles at Low Homological Temperatures
G-10: Research on the Flow Behavior of Molten Slag through Pore
G-11: Research on the Generation Characteristics and Particle Size Distribution of Steelmaking Dust
G-12: Study on Chlorine Distribution Rate between Bosh Gas and Slag in Blast Furnace
G-13: The Effect of Sodium and Zinc on Metallurgy Character of Sinter Ore in BF
G-14: Research on Galvanisability of High Manganese Alloyed Steel Containing Vanadium
G-15: The Influence of Zinc Vapor on Composition and Properties of Coke
G-16: Effect of Starting Microstructure on the Grain Refinement in Cold-rolled Low-carbon Steel during Annealing at Two Different Heating Rates
G-17: Multi-phase Numerical Research on Oxygen Lance Blowing High Temperature Oxygen
G-18: Optimizing the Cooling Rate for Maximum Precipitation Strengthening of Naturally Cooled V Micro-alloyed Steels
G-19: Thermodynamic Calculation and Experimental Investigation of Second Phase Particles in HRB400Ⅲ Steels Enhanced Nitrogen
G-1: Effect of Iron on Combustion Characteristics of Coal Char Pyrolyzed by Lump Coal
G-20: High-speed Quenching of Springs to Generate Compressive Residual Stresses
G-21: Effect of Coarse Grain Band on the Ridging Severity of 409L Ferritic Stainless Steel
G-22: Study of La Element Content Control in Alloy Smelting
G-23: A First-principles Study on the Effect of Coverage in the Dilute Limit for the Adsorption and Dissociation of CO on Fe-110 Surface
G-24: A Study on the Viscous Behaviour with K2O Additions on the Slags
G-2: Application of the EAF Steelmaking Combined Blowing Technology in 100T EAF
G-3: Deformation Analysis and the Relation to Martensite Morphology and Distribution in Dual Phase Steels
G-4: Effect of Cementite on Ductile Fracture in High Tensile Strength Steel Sheets
G-5: Hot Deformation and Processing Maps of a Low Carbon Nb/Ti Microalloy Steel
G-6: Investigation of Combustion Reaction Kinetic of Anthracite by Sectioning Method
G-7: Investigation on the Structure Evolution of Ferrous Burden under the Simulation Oxygen Blast Furnace
G-8: Microstructure and Mechanical Properties of Fe-Ni-Cr-Mo Alloys Fabricated by Centrifugal Casting
G-9: Modeling Deformation in Steels with Retained Austenite
H-10: Degradation of Indium Tin Oxide Film under Electrochemical Corrosion Environment
H-11: Structure-property Relationships Governing Degradation Induced Release of Nanoparticles from Polymer Materials
H-12: Bacterial Corrosion of Oxides Formed in Supercritical Water
H-13: Oxidation Behavior of Deformable Austempered Ductile Iron and the Ways for Improvement of Its High Temperatures Properties
H-14: The Effect of Ni:Co and Al:Ti Ratios on the Oxidation Behaviour of Ni-Co-Al-Ti-15Cr Alloys
H-15: Characterization of Surface Films on Magnesium Alloy AZ31D in NaCl Solutions with Electrochemcial Techniques
H-16: Corrosion Response of ASTM A-299 Steel Weldment in As-weld and Post Weld Heat Treatment Condition
H-18: Evaluation of Corrosion of Shielded Metal Arc Weldment in Boiler Tube Steel in 3.5% NaCl solution
H-19: Modification of AC/DC/AC Technique for Organic Coatings
H-1: A Comparison of Corrosion, Tribocorrosion on Atmospheric Plasma Sprayed Al2O3 8YSZ Composite Ceramic Coating on Titanium for Orthopedic Application
H-20: Study on Corrosion Resistance of the Effect of the Temperature on Thread Steel
H-21: Advanced Thermal Barrier Coating Architectures for Improved Erosion Durability
H-22: Assessment of Mechanical Behaviors of Co-evaporated EBPVD TBCs with Varying Rare Earth Content
H-23: Performance and Durability of Environmental Barrier Coatings on SiC/SiC Ceramic Matrix Composites
H-24: Material Behavior of Window 7 Carrier Panel Tiles and Thermal Pane Glass Fragments Recovered from the Space Shuttle Columbia
H-25: Fabrication of Silica Aerogel as Thermal Insulation Coating
H-2: Characterization of TiC, TiN, TiAlN, TiO and TiCN PVD Nano Coatings on AISI 420 J1 Steel
H-3: Effect of Plasma Etching on the Adhesion of Zn-Mg Coated High Strength Steel
H-4: Getting of Wear-resistant Coatings on Steels in SHS Conditions
H-5: Microstructure and Properties of TiN Coating Layer on Tool Materials
H-6: Phlogopite Glass-ceramic Coatings on Stainless Steel Substrate
H-7: Fabrication of Superhydrophobic Coatings on AA 6061
H-8: Effect of Surface Profile of Mild Steel Substrate upon the Adhesion Strength of WC- 11%Co Flame Spray Coating
H-9: Performance of Methanogen Encapsulated Proppant in Release and Conductivity
I-1: A Novel Production Approach for FeNiCoCu High Entropy Alloys
I-2: Plasmonic, Flexible, Free-Standing, Monolayer Gold Nanoparticle Films for Plasmonic Applications
I-3: Formation of Si Nanostructures via Low-energy He+ Ion Irradiation
I-4: Processing Nanocrystalline Alumina for Sintering
I-5: Reductions in the Size and Spacing of Ni Nanoparticles Dewet Via Laser Pulse through the Addition of Alumina Capping Layers
I-6: Second Derivative Fourier Transform Infrared Spectroscopy Analysis of Aligned Graphene and Graphene Oxide in Carboxymethyl Cellulose Films
I-7: Structural and Magnetic Properties of Melt-spun FebalSix (x = 3-9 wt.%) Materials
I-8: Fabrication of 3D Phononic Crystals with Long-Range SiO2 Phononic Band Structure
J-10: Aggregate Optimization in Concrete by the Viterbo O’ Reilly Díaz Method
J-12: Characterization of Composition and Ionic Effects on Superabsorbent Hydrogel Polymers for Internal Curing of Cement
J-13: Superabsorbent Hydrogels as Internal Curing Agents: Investigating the Effects of Hydrogel Particle Size on Properties and Microstructure of Concrete
J-14: Suspension Polymerization of Superabsorbent Polymer Hydrogels and Impact of Particle Size and Shape on Internal Curing
J-15: Creep of Calcium Aluminate Cements
J-16: Waste Form Screening Test Results of Submerged-bed Scrubber Effluent (SBSE) Using Ceramicrete Phosphate Ceramics
J-17: Electron Microscopy Analysis of Secondary Phases in KHR45A Tubulars after 10 Years Service in an Ethylene Furnace
J-18: Failure Analysis of Uneven Fracture of Connecting Rod during Splitting Operation
J-19: Effect of Geometrical Parameters on Deflection of Different Chassis Components Sections
J-1: Bilayer Graded Al/SiC/Rice Husk Ash Composite: Thermal and Electrical Properties
J-20: Ceramic-metal Joining on the Nanoscale: Engineered Interfaces for Robust Thermal Performance
J-21: Fracture Toughness Comparison between Friction Stir Welds in Two API-5L-X80 Steels with Different Microstructure and Composition
J-22: Application of Computational Thermodynamics & Kinetics to Rare Earth Reduction in Magnesium Alloys
J-23: Light Element Measurements on Electron Probe Microscopy by Wavelength-dispersive X-ray Spectrometry
J-24: Localized Corrosion Behavior of Mg-Y-R.E-Zr Alloy in Basic Solution
J-26: A Chemical Model to Predict the Formation of a Semiconductor Solid Solution, by Using Mechanochemical Reactions: The Effect of Oxygen Potential
J-27: Characterization of Mechanical Milling Induced Effects in Titanate Pyrochlores with Neutron Total Scattering
J-28: The Effect of Sintering Temperature on the Microstructure of Fe-1.4 wt.% C Alloy Prepared by Mechanical Alloying
J-29: Effect of Milling Conditions on the Mechanochemical Reactions in the System Al – B2O3 – C
J-2: Porous Silicon Oxycarbide Composites with Aligned Macro Porosity from Water-based Slurry by Freeze Casting Process
J-30: Effects of Few-layered Graphene (FLG) on the Mechanical and Thermal Properties of Copper Matrix Composites
J-31: Electrical Properties of Ln4Zr3O12 (Ln = Y, Ho, Er and Yb) Zirconates Synthesized by Mechanical Milling
J-32: Facile Oxyhalides Production from Halogenated Pollutants Destruction by Ball Milling
J-33: High-energy Milling Activation, a Key Step on a Molten Salts Route, to Synthesize Multiferroic Compounds at Low-temperature
J-34: Mechanical Activation Effect on the Chemistry of a Typical Float Glass Batch
J-35: Mechanisms of Refractory Metal Borides and Carbides Formation during Mechanical Alloying
J-36: Mechanochemical Acetylation of Peat
J-37: Mechanochemical Destruction of Fluorosurfactants as the Alternatives to PFOS: A Feasibility Study
J-38: Mechanochemical Synthesis of Thermoelectric Materials for Space Applications
J-39: Mechanochemical Synthesis, Structural Characteristics, and Electrical Properties of the Gd2(Hf2-xTix)O7 Solid Solution
J-3: Thermal and Electrical Properties of Infiltrated High Volume Fraction Si3N4 and Si3N4-coated SiO2 Preforms by Al-Mg-Si Alloys as Heat Sink Materials in Electronic Packaging
J-40: Mechanochemical Synthesis, Structure and Properties of Solid Solutions of Alkaline Earth Metal Fluorides: Ma1-xMbxF2 (M: Ca, Sr, Ba)
J-41: Mechanochemistry for CO-PROX Catalysts Preparation
J-42: Microstructure-mechanical Property Relationship for Nanocomposite High Energy Density Materials
J-43: Reaction Kinetics and Thermodynamic Study of Metal-doped Magnesium Silicides
J-44: Synthesis of Al/Graphene Composites via Solution Process Combined with Mechanical Milling
J-45: Thermoelectric Properties of Amorphous Ti50Cu28Ni15Sn7-dispersed Bi0.4Sb1.6Te3 Nanocomposite Fabricated by Mechanical Alloying and Vacuum Hot Pressing
J-46: Microstructure and Mechanical Properties of the As-cast and Extruded Al-Si-Fe-Cu-Mn Based Alloys Fabricated by Adding Grain Refiner
J-47: Effect of the Microstructure Characteristics of Semi-solid Slurries on the Gradient Structure of Tubes Produced by Rheo-squeeze Casting High Si Al Alloys
J-48: Microstructure and Deformation Behaviour of Ti-Cu Alloys in the Semisolid State
J-49: Modelling of Metal Drawing Process for Aluminium Alloys in Semisolid State
J-4: Improvement of Mechanical Properties of Pure Titanium by Boronization and Nitridization by Al Added Fused Salt Bath
J-50: New Semi-solid Forging Process for Fabrication Aluminum Bipolar Plates in Fuel Cell
J-51: Semi-solid Forming of Cavity Filter Using in the Telecommunication Industry
J-53: Microstructure and Mechanical Properties of Ti/AZ31 Multi-layered Materials Processed by Accumulative Roll Bonding
J-54: Effect of Powder Size and Sintering Parameters on Spark Plasma Sintering Behavior of TiAl-Nb Alloys
J-55: Processing and Characterization of Gradient Micro-porous Metals through Blended Elemental Powder Metallurgy
J-56: Sintering and Characterization of Ge2Sb2Te5 Target by Spark Plasma Sintering
J-57: Microstructural Heterogeneity and Texture of As-received, Vacuum Arc-cast, Extruded, and Re-extruded NiTi Shape Memory Alloy
J-58: Microstructure Evolution and Deformation Mechanisms Responsible for Flow Softening of Ti17 Alloy during Isothermal Compression
J-59: The Influence of Deformation Twinning on Copper 220 Caused by Cryogenic Processing
J-5: Obtaining of Boride Coatings under SHS Conditions for Car Parts
J-60: Carbon Structure in Blast Furnace Dusts Characterized by Raman Spectroscope and Its Links with Combustion Reactivity
J-61: Comparative Study on the Microstructure Evolution of Semicoke and Lump Coal under High Temperature
J-62: Mechanical Analysis of Artificial Stone Produced with Waste from Glass Sheeting Processes in Polymeric Matrix
J-63: Research on the Recycling Technology of Ladle Furnace Hot Steel Slag
J-64: Research on the Separation Behavior of Zinc-bearing Dust Briquettes
J-65: The Effect of Particle Size of Semi-coke on the Permeability of Stock Column
J-66: Effect Of SiC Nanoparticles on Microstructure and Mechanical Properties of CoCrFeMnNi HIGH Entropy Alloy with FCC Solid Solution
J-67: Evaluations of Al-Cu-CNF Composite Products Fabricated by Liquid Process Utilizing CGG Process
J-68: Martensitic Phase Transformation in a f.c.c./B2 FeNiMnAl Alloy
J-69: Microstructures and High Temperature Mechanical Properties of 304 Stainless Steel Nanocomposites
J-6: High Temperature Oxidation Study of Hafnium & Zirconium Diborides: MHD Electrode Coatings
J-70: Additive Manufacturing by Extrusion Freeforming of Kaolinite Clay Based Ceramics
J-7: Relating Hardness, Bonding, and Composition in AlLiB14
J-8: The Nature of Thermoelectricity in AlYB14 Compounds
J-9: Admixture Optimization in Concrete by Using Superplasticizers
K-1: Analysis of Corn and Tobacco Residue on Archaeological Objects
K-2: High Resolution Digital Elevation Modeling of Artworks by Structured Light Methods
K-3: Importance of Stabilizing Agents in Conserving the Historical/Cultural Heritage in Tainan City
K-4: Initial Micro-structural Evaluation of Tamahagane Steel
K-5: Peculiar Protrusions: Examining the Chemistry of Medieval Oil-on-copper Paintings Using Microscopy and Spectroscopy
K-6: State of Conservation Survey of Artworks by Image Analysis Techniques: The Case Study of the Analco Virgin (Puebla, Mexico)
K-7: Uncovering the Secrets of "32.6 the Bearded Man"

Questions about ProgramMaster? Contact