3D Printing of Structural Battery Composites with Continuous Carbon Fibers

A Comparative Study of Extrusion Deposition of Long and Continuous Carbon Fiber Reinforced Composites for Large-scale Additive Manufacturing

A Dislocation Density Based Constitutive Model for the Design of Additively Manufactured (AM) Metals and Alloys

A Multi Robot Coordinated-motion Approach to Large Scale Deposition Systems – MedUSA

Abrasive Flow Machining of Additively Manufactured Titanium: Thin Walls and Internal Channels

Acoustic Signatures in Metal Laser-powder Bed Fusion

Adaptive Voxelization for Computed Axial Lithography

Additive Manufacturing of a Carbon Fiber Reinforced Thermoset Resin via Reactive Extrusion Additive Manufacturing (REAM)

Additive Manufacturing of Carbon Fiber Reinforced Polymer Composite via Reactive Extrusion

Additive Manufacturing of Neat and Carbon Fiber Reinforced PAEK Polymers

An Investigation on the Definition and Qualification of Form on Lattice Structures

Analysis of Fiber Orientation and Concentration in Large Scale Polymer Composite Deposition of Carbon Fiber-reinforced Thermoplastics

Analyzing Remelting Conditions Based on In-Situ Melt Pool Data Fusion for Overhang Building in Powder Bed Fusion Process

Autoencoder-based Anomaly Detection for Laser Powder Bed Fusion

Automated Anomaly Detection of Laser-based Additive Manufacturing Using Melt Pool Sparse Representation and Unsupervised Learning

Automated Detection of Part Quality during Two Photon Lithography via Deep Learning

Automated Process Planning for a 5-axis Hybrid Manufacturing System

Autonomous Multimodal Manufacturing Optimization

Bayesian Process Optimization for Additively Manufactured Nitinol

Characterizing the Internal Morphology of Transition Regions in Large-scale Extrusion Deposition Additive Manufacturing

Collision-free Solution for Multi-axis Hybrid Additive Manufacturing

Composition-processing-properties Relationships for In Situ Reinforced Ti-B4C-BN Composites via Directed Energy Deposition

Conformal Multifunctional Composite Fabrication via Conductive Direct Ink-write and Sacrificial Additively Manufactured Tooling

Correlating Large-scale AM Print Parameters to Fiber Length and Mechanical Performance of Reinforced Polymer Composites

Correlating the Effect of Part Geometry and Support Structure on Thermal History in Laser Powder Bed Fusion

Data Acquisition in Wire-arc Additive Manufacturing: The Road to Digital Twin

Deep Learning Assisted Approach to Monitoring Anomalies of 3D-bioprinting Process

Defining Robotic Torch Parameters for Non-gravity Aligned (NGA) Metal Additive Manufacturing Using CAD to Part Framework

Design and Manufacture of Continuous Fiber-Reinforced 3D Printed Unmanned Aerial Vehicle Wing

Detecting Defects Caused by Optical Lens and Focus-related Aberrations in Laser Powder Bed Fusion

Development of a Laser Hot Wire Additive Manufacturing Process

Development of Bimetallic Casting for Wear Performance through Infiltration of Additively Manufactured Metal Lattice Structures

Dopant Patterning for Volumetric Sintering via RF Heating

Droplet Diagnostics in Droplet-on-Demand Liquid Metal Jetting Using Heterogenous Sensing

Effect of Composition and Phase Diagram Features on Printability and Microstructure in Laser Powder Bed Fusion: Development and Comparison of Processing Maps Across Alloy Systems

Effect of Surface Texture on Deformation Behavior during Shot Peening of Electron Beam Melted (EBM) Ti-6Al-4V

Effective Registration of Engineered Lattice Geometry: A Comparative Study of Measurement Methodologies

Effectiveness of Shielding Gas in Wire-arc Additive Process

Effects of In-Situ Mechanical and Chemical Polishing on Surface Topography of Additively Manufactured Fiber-Reinforced Polymers

Empirical and simulated x-ray computed tomography probability of detection analysis for additive manufacturing and calibrated defect artifact development

Evaluation of Liquid Doping Methods for Use in Laser Powder Bed Fusion

Finite Element Modelling of the Fused Filament Fabrication Additive Manufacturing

Fused Filament Fabrication on the Moon

Geometrical Deviations in Additive Manufacturing – Influences on the Manufacturing Accuracy

Heterogenous Sensing and Scientific Machine Learning for In-process Anomaly Detection in Laser Powder Bed Fusion – A Single-track Study

High Resolution, High Conductivity Components by Aerosol Jet Printing and Electrodeposition

Hybrid Laser Powder Bed Fusion of Aluminum Alloy Radio Frequency Resonators

In-situ Detection and Prediction of Porosity in Laser Powder Bed Fusion Using Dual-wavelength Pyrometry

In-situ Flaw Detection in Wire Arc Additive Manufacturing Using an Acoustic Sensor

In-situ Microstructural Transformations in Wire-arc Additively Manufactured Maraging 250-grade Steel

In-situ Thermographic Inspection for Laser Powder Bed Fusion

In-situ Verification of 3D-Printed Electronics Using Deep Convolutional Neural Networks

Influence of Measurement and Sampling Strategy on Analysis of Surface Finish in Laser Powder Bed Fusion Additive Manufacturing of Nickel Superalloy 625

Influence of the Loading Direction on the Mechanical Properties of Additively Manufactured Metals

Integrating a Direct Ink Write and Mask-projection Vat Photopolymerization System to Enable Additive Manufacturing of High Viscosity Photopolymer Resins

Integrating Digital Light Processing with Direct Ink Writing for Hybrid 3D Printing of Functional Structures and Devices

Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components

Laser Powder Bed Fusion of Highly-reinforced Metal Matrix Composites

Layer-wise Certification for Direct Energy Deposition Processes based on Melt Pool Morphology Dynamic Analysis

Location and Orientation Dependency in Surface Roughness of Nickel Super Alloy 625 Parts: Statistical and Distributional Analysis

Locational Dependency of Additively Manufactured Parts: Effects of Surface Roughness on Fatigue Behaviors

Low Density Mechanical Metamaterial Using DLP-based 3D Printing

Machine Learning Enabled Laser Spatter and Flaw Detection in Laser Powder Bed Fusion Processes

Mapping Energy Consumption during Milling of Interlayer Ultrasonic Peened 316 Stainless Steel

Mechanical Behavior of ABS after Interlayer Ultrasonic Peening during Fused Filament Fabrication

Mechanical Interface for Iterative Hybrid Additive/Subtractive Manufacturing

Microstructural Evolutions in Jetting Reinforcement Nanoparticles to Metal Matrix in Laser Powder Bed Fusion

Microstructural Modeling of β to α Transformation Morphologies in Multi-layered Laser Wire Additively Manufactured Ti-6Al-4V Parts

Microstructure and Tensile Test Data Alignment for Additive Manufacturing Data Registration

Modeling Inter-layer Bonding in Additive Manufacturing of Continuous Fiber Reinforced Polymer Composites

Multi-modal In-situ Monitoring Data Analysis for Overhang Features Built with Laser Powder Bed Fusion

New Robotic Work-cell for Hybrid Large-scale Metals Additive and Subtractive Manufacturing

On the Diminishing Returns of Thermal Camera Resolution for PBF Temperature Estimation

Online Geometry Quality Management During Directed Energy Deposition Using Laser Line Scanner

Physics-informed and Hybrid Machine Learning in Additive Manufacturing

Porosity Analysis of Laser Powder Bed Fusion Parts Using the Statistics of Extremes

Powder Features Affecting Structural and Mechanical Properties of Additively Manufactured Inconel 718: A Machine Learning Analysis

Predictions of the Elastic-plastic Compressive Response of Functionally Graded Polymeric Composite Lattices Manufactured by 3D Printing

Predictive Control of Porosity in Laser Powder Bed Fusion

Preparation and Characterization of Laser Direct Deposited Spinel Filaments for Wire-fed Additive Manufacturing of Transparent Ceramics

Printing of Metal Droplet Streams Using Continuous Breakup of a Laser Heated Metal Wire

Process Development for the Selective Laser Melting of Tungsten Carbide-nickel Matrix Composites

Progress in Photopolymer Resin Development for Volumetric Additive Manufacturing

Progress on Residual Stress Measurement (RSM) in Hybrid Additive Manufacturing

Quality Assurance in Biomaterial Aerosol Jet Printing Using Machine Learning

Recent Advances in Laser-wire Directed Energy Deposition: Novel Modes of Thermal Control and Site-specific Melt Pool Size Control

Recycling Carbon Fiber Filled Acrylonitrile-Butadiene-Styrene for Large Format Additive Manufacturing

Selective Doping of Composites Using Piezoelectric Printheads

State of the Art and Technology in Additively Manufactured Polymer Composites

Study of Printing Parameters in Binder Jet Additive Manufacturing of Cobalt Chrome - Tricalcium Phosphate Biocomposite

Surface Improvement of Additively Manufactured Polypropylene Parts

Surface Roughness Variation in Laser Powder Bed Fusion Additive Manufacturing

The Role of Interface in Additively Manufactured Interpenetrating Composites

Thermomechanical Properties of a Glass and Carbon Nanofilled Photopolymer Composite Additively Manufactured via Stereolithography

Towards a Digital Twin: 4D Data Conditioning for Metal Inert Gas Big Area Additive Manufacturing

Ultrasonic Characterization of Frequency Dependence from Interlayer Milling and Peening 316 Stainless Steel during Additive Manufacturing

Understanding Filler Orientation in Material Extrusion Additive Manufacturing of Thermoset Composites

Unsupervised Defect Classification of 2D SEM and 3D X-Ray CT Images from Laser Powder Bed Fusion

Wire Arc Additive Manufacturing of Low Carbon Steel for Casting Applications

Questions about ProgramMaster? Contact programming@programmaster.org