3D Printing of Live Diatoms to Make Structures with Many Levels of Hierarchy

Application of Natural Nanoparticle in Polymeric Blend of HMSPP/SEBS for Biocide Activity

Ballistic Test of Multilayered Armor with Intermediate Polyester Composite Reinforced with Fique Fabric

Ballistic Tests of Epoxy Matrix Composites Reinforced with Arapaima Fish Scales

Characterization of Arapaima Fish Scales and Related Reinforced Epoxy Matrix Composites by XRD, EDS and SEM

Chemical and Morphological Characterization of Guaruman Fiber

Comparison of Interfacial Adhesion between Polyester and Epoxy Matrix Composites Reinforced with Fique Natural Fiber

Comparison of the Impact Properties of Composites Reinforced by Natural Fibers

Evaluation of Buriti Fabric as Reinforcement of Polymeric Matrix Composite for Ballistic Application as Multilayered Armor System

Evaluation of the Absorbed Energy and Velocity Limits of Reinforced Epoxy Composites with Mallow Natural Fibers Used in Ballistic Protection

Evaluation of the Mechanical, Thermal and Swelling Behavior of Hydrogels Containing Clay Laponite RD

Evaluation of the Projectile's Loss of Energy in Polyester Composite Reinforced with Fique Fabric

Evaluation on the Design of Piassava Fiber Reinforcement Epoxy Matrix Composite for Ballistic Application

Fique Fiber-reinforced Epoxy Composite for Ballistic Armor Against 7.62 mm Ammunition

Fish Skin: A Natural Inspiration for Novel Materials and Coatings

I-43: Artificial Stones from Marble Waste

I-44: Charpy Impact Test of Polymeric Composites with Epoxy Resin Reinforced by Jute Fabric

I-45: Development of Silicate Glasses with Granite Waste

I-46: Evaluation of Feldspathic Rock Waste on the Production of Structural Ceramics with Greater Value Added

I-47: Evaluation of Mechanical, Thermal, and Hydrophobic Properties in Blends before and after the Incorporation of Organic Compound and SiO2

I-48: Evaluation of the Mechanical Characteristics of Geopolymerized Ceramic from Granulated Blast Fumace Slag

I-49: Flexural Test of Composite Eco-friendly Composites Reinforced by Piassava Fiber

I-50: Influence of Eletrofunded Alumina Residue on Red Ceramic Properties

I-51: Izod Impact Testing Composites with Vegetal Polyurethane Matrix Reinforced by Cotton Fabric

I-52: Mechanical Resistance of Artificial Stone Composite Using Waste from Fluorescent Lamp Glass in Polymeric Matrix

I-53: Performance of Natural Curaua Non-woven Fabric Composites as Stand-alone Targets against Standard 9 mm and 7.62 mm Projectiles

I-54: Reuse Of Quarry And Industrial Waste For The Production Of Artificial Ornamental Stones

I-55: Reuse of Quarry Waste in Artificial Stone Production with using Vacuum, Compression and Vibration

I-56: Reuse of the Iron Ore Residue through the Production of Coating

I-57: Soda-lime Glass Waste Utilization for Red Ceramic Production

I-58: Study of the Effect of Incorporation of Laminated Flat Glass’ Waste in a Polymeric Matrix

I-59: Study of the Incorporation of Waste from the Paper Industry in Ceramic Tiles

I-60: Study of the Technological Properties of Multiple Mortar Use with Efficient Addition of Rock Waste

I-61: Technological Properties of Brick Waste-based Geopolymer

I-62: Use of Waste of Ornamental Stone in Ceramic Mass Incorporation in Brazil

Impact Energy Evaluation of Natural Castor Oil Polyurethane Matrix Composites Reinforced with Jute Fabric

Impact Properties of Composites Reinforced by Bamboo Fibers with Polyurethane and Epoxy as Matrix

Incorporation of Dry Biomass of Salvinia Auriculata AUBL from Phytoremediation Process for Traditional Ceramics Production

Izod Impact Test on Epoxy Composites Reinforced with Mallow Fibers

Mechanical and Morphological Properties of Eucalyptus Fibers

Mechanical and Thermal Properties of Clay Filled Recycled Low Density Polyethylene

Natural Fibers Reinforced Polymer Composites Applied in Ballistic Multilayered Armor for Personal Protection - An Overview

Physical and Mechanical Properties of Artificial Stone Produced with Granite Waste and Vegetable Polyurethane

Piassava Fibers: Morphologic and Spectroscopic Aspects

Recycling of Blast Furnace Sludge into Clay Ceramic

Structural Characterization of Fique Fabric Reinforcing Epoxy Matrix Composites by XRD and SEM Analysis

Structure-property Relation of Epoxy Resin with Fique Fibers: Dynamic Behavior using Split-hopkinson Pressure Bar and Charpy Tests

Study of Incorporation of Fuel and Fluxing Wastes in Red Ceramics

Technical Feasibility of Catalyst Waste as Raw Material for Ceramic Industry

The Potential of Micro- and Nano-sized Fillers Extracted from Agroindustry Residues as Reinforcements of Thermoplastic-based Biocomposites - A Review

Thermal Behavior of Epoxy Composites Reinforced with Fique Fabric by DSC

Thermal Characterization of a Nanobiocomposite for Use in Bone Defects

Questions about ProgramMaster? Contact programming@programmaster.org