ProgramMaster Logo
Conference Tools for 2019 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2019 TMS Annual Meeting & Exhibition
Symposium Recent Advances in Functional Materials and 2D/3D Processing for Sensors and Electronic Applications
Sponsorship TMS: Thin Films and Interfaces Committee
Organizer(s) Pooran Joshi, Oak Ridge National Laboratory
Ravindra Nuggehalli, New Jersey Institute of Tech
Jud Ready, Georgia Institute of Technology
Anming Hu, Univ of Tennessee
Tolga Aytug, Oak Ridge National Laboratory
Konstantinos Sierros, West Virginia University
Wenchao Zhou, University of Arkansas
Scope Additive manufacturing and direct-write printed electronics technologies employing metal, dielectric, polymer, and ceramic materials have the potential to enable new products and markets. Advanced additive manufacturing and direct-write printing techniques in combination with rapidly expanding material sets have the potential to meet the cost and performance demands of future manufacturing technologies. The proposed symposium will focus on the emerging additive manufacturing concepts and techniques for the processing of 2D/3D structures. Technical sessions will focus on processing and characterization of active and passive functional components integrated on engineered geometries. Topics related to functional materials, low-temperature processing, large area manufacturing, and electronic applications are within the scope of this symposium. Invited and contributed papers will discuss both the fundamental aspects underlying certain applications and the particular challenges regarding technology, fabrication processes, and reliability.
Research fields of interests are related but not necessarily limited to the following topics:
- Nanomaterials, inks, and substrates for direct-write printing and additive manufacturing
- Direct-write printing and additive manufacturing of functional 2D/3D structures and geometries: Materials, Processes, and Characterization
- Low thermal budget processing and characterization of functional inks and 2D/3D materials
- Hybrid electronics: Merging printed electronics and additive manufacturing (Materials and Process integration to realize active/passive sensors, detectors, TFTs, antennas, PVs, batteries)
Abstracts Due 07/16/2018
Proceedings Plan Planned: Supplemental Proceedings volume
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

3D Printed High Performance Sensors
3D Printing of Hierarchical Multifunctional Foams
3D Printing of Pharmaceuticals and Transdermal Drug Delivery – An Overview
3D Printing of Polymer-based Gasochromic, Thermochromic and Piezochromic Sensors
A "Press and Go" Fabrication Technique for a Flexible Biofuel Cell Patch for Power Generation and Glucose Sensing
Adaptive 3D-Printed Liquid Metal Electronics
Additive Manufacturing of Electronic and Magnetic Sensors
Additive Manufacturing of Functional Electronics and Ingestible Biomedical Devices
Additive Manufacturing of High Performance Rare Earth Permanent Magnets: Prospects and Challenges
Advances in 2D Material Processing and Application: A Direct-ink Writing Approach Employing Graphene-based Inks for Facile Gas Sensor Patterning and Fabrication
Advancing the Understanding of Continuous Direct-Write Printing by Operando Coherent X-ray Scattering
Aerosol Jet Printing of Dielectric Polymer Blend for Applications in Flexible CNT Thin Film Transistors
Conformal and Embedded Electronics in 3D
Develop Solution-based, Direct-printing Processes of Inorganic Semiconductors for Electronics and Energy Applications
Direct-write Flexible Sensors for Energy Efficient Wireless Sensor Network
Dissolvable Tattoo Sensors from Advanced Manufacturing and Materials
Electro-mechanical Methods to Determine the Reliability of Flexible Electronics
Electrochemical Detection of Acetaminophen using CeO2-modified Pt/C Catalyst Inks
Electronic Tongue Sensing with a Six-sensor Array for Multi Flavors Detection
Fabrication of Optically Transparent Glass via a Microfluidic-assisted Sol-Gel 3D-Print
Formulation of Curable Resins Utilized in Stereolithography
Highly Conductive Wiring and Reliable Bonding for Stretchable Electronics
In Situ Real Time Defect Detection and Residual Stress Measurement in Additive Manufacturing
Ink Design for Continuous Direct Writing: Controlling Complex Metal-Oxide Mesostructures
Intercalation of Van Der Waals Layers for Multifunctional Applications
Low-temperature Projection Selective Sintering of Phase Change Materials for Electronics Packaging
MARS-Magnetic Augmented Rotation System
Materials Integration for Flexible Electronics: Transparent Supercapacitors
Patterning of ZnO Quantum Dots and Poly(methyl methacrylate) Hybrids
Some Research Work on a Novel “Double-Pulse Laser Micro Sintering” Process
Surface Force-driven Direct Ink Writing of Titanium Dioxide Thin Films for Photovoltaics


Questions about ProgramMaster? Contact programming@programmaster.org