ProgramMaster Logo
Conference Tools for 2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019)
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019)
Symposium 2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019)
Organizer(s) David L. Bourell, University of Texas
Scope The Thirtieth Annual International Solid Freeform Fabrication Symposium (SFF) – An Additive Manufacturing Conference will be held August 12-14, 2019 in Austin, Texas. This three-day conference is a high-level topical research meeting providing the opportunity for AM researchers from around the world to disseminate their research results and to interact with other researchers. At last year’s meeting, there were 680 researchers from 18 countries who gave 517 presentations.
Abstracts Due 04/22/2019
Proceedings Plan Definite: Post-meeting proceedings

‘Seeing’ the Temperature Inside the Part during the Powder Bed Fusion Process
3-D Printed Materials and Their Effects on Quasi-optical Millimeter Wave Guide Lens Systems
30 Years of Additive Manufacturing and the Solid Freeform Fabrication Symposium
3D Characterizations of Internal Porosity and Surface Topology and Their Influence on Local Fracture Behavior in AM 316L Stainless Steel
3D Model Decomposition and Sequencing on 5-axis Hybrid Manufacturing Process
3D Printed Advanced Individualized Hearing Protection Devices for Sound Localization and Externalization Preservation
3D Printed Production Fixtures for the Automotive Electronic Manufacturing Industry
3D Printing Card
3D Printing of High-temperature Polysiloxane Thermoset Resin
3D Printing of Metals with Xenon Flash Lamp
3D Printing of Polymers with Xenon Flash Lamp
3D Printing of Tungsten by Selective Laser Melting
4D Printing of Metals: A Demonstration in Copper Parts
A Comparative Study Between 3-axis and 5-axis Additively Manufactured Samples and Their Ability to Resist Applied Loading
A Computational and Experimental Investigation into Mechanical Characterizations of Strut-based Lattice Structures
A Coupled Thermal-flow Topology Optimization Approach for High-temperature Applications
A Design Method to Exploit Synergies Between Fiber-Reinforce Composites and Additive Manufactured Processes
A Detection Method for Spatter Particles and Related Defects in Selective Laser Melting Process Using Neural Network on Images Produced by In-situ Monitoring
A Direct Metal Laser Melting System Using a Continuously Rotating Powder Bed
A Fast Heuristic for Determining Build Orientation to Minimize Thermal Distortion in Laser Powder Bed Fusion Additive Manufacturing
A Framework for Enhancing Work Envelope of SFF Implements while Sustaining Dimensional Accuracy
A Framework for Manufacturability Assessment and Minimum-order-machine Classification of Parts Fabricated by Additive-subtractive Processes
A Framework for the Performance Qualification of Additively Manufactured Parts under Multiaxial Loading Emulating In-service Conditions
A Framework to Streamline New Materials Implementation in Additive Manufacturing
A Fully Automated Design Pipeline for Mass Customisation of Personal Equipment via Additive Manufacture
A Hybrid Additive Manufacturing Framework for the Multi-phase Fabrication and In-line Characterization of Functional Devices
A Machine-agnostic Feedforward Controller for Commercial Powder Bed Fusion Systems
A Modeling-based Study of the Use of Additive Manufacturing for the On-demand Spare Part Supply
A Modified Inherent Strain Method with the Consideration of Transformation Induced Plasticity for Metal Additive Manufacturing Process
A Modified Multi-layer and Multi-track Cellular Automaton-finite Element Model (CAFE): 3D Grain Growth and Prediction of Cracking Incidence
A Mold Insert Case Study on Topology Optimized Design for Additive Manufacturing
A Multi-fidelity Gaussian Process Model for Melt Pool Prediction in Laser Powder Bed Fusion
A Multi-scale Computational Model to Predict Bone Growth in Cell Seeded Scaffolds with Triply Periodic Minimal Surface Geometries
A Novel Method of 3D Reconstruction for Additive Manufacturing
A Part Strength Calculation Method for Thermoplastic Polymer Parts Produced by Material Extrusion AM
A Passive On-line Defect Detection Method for Wire and Arc Additive Manufacturing Based on Infrared Thermal Imager
A Practical Approach to Determine Optimal Heat Treatment Conditions for Additively Manufactured Parts
A Review on Powder Bed Fusion Additive Manufacturing of Inconel 625
A Sensor Fusion Approach for In-situ Measurement of Metal Laser Powder Bed Fusion
A Software/hardware Framework for Mature Industrialisation of Directed Energy Deposition Additive Manufacture
A Standardized Framework for Communicating and Modelling Parametrically Defined Mesostructure Patterns
A Strategy to Determine the Optimal Parameters for Producing High Density Part in Selective Laser Melting Process
A Study of Pore Formation During Single Layer and Multiple Layer Build by Selective Laser Melting
A Study of the Influence of Laser Scan History on Coaxial NIR Measurements for a Closed-loop Control in SLM
A Thermoelastoplastic Energy and Mass Deposition Simulator for the Prediction of Residual Fields from Additive Manufacturing
A Time-efficient Analytical Model of Laser Directed Energy Deposition Process for Functionally Graded Materials Fabrication
A Universal Material Template for Multiscale Design and Modeling of Additive Manufacturing Processes
A Versatile, Multi-mode Liquid Metal Printing Platform for Microstructural Studies
A Web-based Collaborative Process Planning System for SLM
Acoustic Process Monitoring
Active Cooling of Direct Energy Deposition
Adaptive Production Planning for AM series applications
Additive and Subtractive Electrohydrodynamic Jet Printing Behavior of Polymers for Patterning Area-selective ALD
Additive Manufactured Lightweight Vehicle Door Hinge with Hybrid Lattice Structure
Additive Manufactured Stainless Steel Nanocomposites with Uniform Dispersion of Nanoparticles
Additive Manufacturing In-Situ Information Modeling for Data Sharing and Analytics
Additive Manufacturing in Non-traditional Environments
Additive Manufacturing Materials Tested by Miniature Tensile Specimens
Additive Manufacturing of Aluminum Alloys by Laser Foil Printing
Additive Manufacturing of Bicontinuous Piezocomposites Based on Triply Periodic Cellular Micro-skeleton for Tailorable Hydrostatic Performance
Additive Manufacturing of Fatigue Resistant Materials: Avoiding the Early Life Crack Initiation Mechanisms during Fabrication
Additive Manufacturing of High-Gamma Prime Nickel-Based Superalloys through Selective Laser Melting (SLM)
Additive Manufacturing of Metallic Glasses: Challenges and Opportunities
Additive Manufacturing of New Structures for Heat Exchange
Additive Manufacturing of Porous Copper Wicking Structures for Heat Pipes and Vapor Chambers
Additive Manufacturing of Tungsten: An Alloy Approach
Additive Manufacturing Simulation Comparison Using Commercial Tools
Additively Manufacturing Airfoil-like Shapes with Cold Spray
Advanced Applications for Zirconia Produced by NanoParticle JettingTM
Advancing Additive Manufacturing with Robotics Beyond 2.5D
Aerosol Jet Printing of Inductor Devices for Power Electronics
An Aluminum-lithium Alloy Produced by Laser Powder Bed Fusion
An Automated Method for Geometrical Surface Characterization for Fatigue Analysis of Additive Manufactured Parts
An Experimental Study of Design Strategies for Stiffening Thin Plates under Compression
An Experimental Study on Selective Laser Melting of Tungsten: Effects of Substrate Material and Process Parameters
An Exploration of the Use of Archimedes Density Measurement for the Characterization of Spatial Density Distribution of Metal Additive Manufacturing Parts
An Improved Design of Downer Reactor for Particle Rounding
An Investigation of Selective Laser Melting at Elevated Atmospheric Pressure: Effects on Melt Track Morphology and Porosity
An Open-architecture Multi-laser Research Platform for Acceleration of Large-scale Additive Manufacturing (ALSAM)
An Open Source Build Software and Controller Platform for Powder Bed Fusion Additive Manufacturing
Analysis of Fatigue Crack Evolution Using In-situ Testing
Analysis of Hatch-contour Interfacial Angle Influence on Defect Formation in Ti–6Al–4V
Analysis of Layer Arrangements of Aesthetic Dentures as a Basis for Introducing Additive Manufacturing
Analysis of Metal Powder Infused Filament - Low Cost Metal 3D Printing
Analysis of Porosity Formation and Meltpool Geometry in Directed Energy Deposition Using High-speed, In-situ Imaging
Analysis of Pressure Profile Within Big Area Additive Manufacturing Single Screw Extruder
Analysis of the L-PBF Process Stability by Means of Schlieren and Shadowgraph Techniques
Antibacterial Properties of 3D-printed Surfaces with Silver Coating
Application of a Fast-solving Analytical Melt Pool Model for Geometric and Microstructural Prediction
Application of Carbon Fiber-reinforced 3D Printing and Polyjet Technologies to Hygroscopically-actuated Architectural Structures
Application of the Fog Computing Paradigm to Additive Manufacturing Process Monitoring and Control
Applications of Supervised Machine Learning Algorithms in Additive Manufacturing: A Review
Applying Prediction Algorithms to Part Selection for Print Jobs and Production Floor Scheduling
Approach on a Validation Method for Thermal FEM-simulations of the LPBF-M Process Using Temperature Measurements Inside the Substrate Plate
Area-filling Strategies for Cladding based Additive Manufacturing
Assembly-free Elastoplastic Analysis for Additive Manufacturing Simulation
Assessing the Corrosion Characteristics of Fe-based Alloys Prepared by Laser Powder Bed Fusion
Atom Probe Tomography Study of Second-phase Precipitates in Wire-arc Additive Manufactured Nickel Aluminum Bronze
Automated Registration of X-ray Computed Tomography Information with In-situ Data Streams Using Fiduciary Markers
Bead Characterization System (BCS) for Big Area Additive Manufacturing (BAAM)
Benchmarking In-situ High-speed Photo Sensors for Process Parameter Development in a Custom Built Open-architecture Laser Powder Bed Fusion System
Binder-jet 3D-printing process: Opportunities and Challenges
Binder Jet Printing of Metallic Components Using a Novel Hierarchical Binder Ink
Binder Jetting 3D Printer
Binder Jetting Additive Manufacturing of Ceramics: Effects of Particle Size on Powder Flowability and Resultant Mechanical Properties
Binder Jetting Additive Manufacturing of Ceramics: Simulation of Powder Spreading Process
Binder Jetting Additive Manufacturing of Copper/Diamond Composites
Binder Jetting Additive Manufacturing of Metals
Binder Jetting Additive Manufacturing Using Spray-Freeze-Dried Ceramic Granules
Binder Jetting of Metal Parts with Fine Powder Particles
Binder Saturation, Layer Thickness, Drying Time and Their Effects on Dimensional Tolerance and Density of Cobalt Chrome - Tricalcium Phosphate Biocomposite
Biodegradable Cellular Zinc Fabricated by Selective Laser Melting
Bioprinting with Stem Cells and Alginate-Gelatin Bioink Modified with Bioactive Glass
Build Orientation Optimization for Structural Performance Enhancement of Functionally Graded Conformal Lattice Structure Fabricated by Fused Deposition Modeling
Can Solderable Inks Increase Survivability for Resilient Electrical Connections?
Can We Control the Temperature History in Powder Bed Fusion? A Linear Systems Theory Study of the Powder Bed Fusion Process
Carbon Composite Engineered Lattice Structures Exhibiting Viscoelastic Behavior
Cause of Cantilever Structure Distortion via Selective Laser Melting: Inconsistent Shrinkage during Additive Manufacturing Process
Cellular and Topology Optimization of Beams under Bending: An Experimental Study
Cellular Automata Modeling of Alloy Solidification for Wide Ranges of Scan Pattern and Material Parameters in Selective Laser Melting*
Cellular Ceramics by Selective Laser Sintering
Ceramic On-demand Extrusion of Low Temperature Co-fired Ceramics
Characterisation of Austenitic 316LSi Stainless Steel Produced by Wire Arc Additive Manufacturing with Interlayer Cooling
Characterization of Additively Manufactured Channels Made by Binder Jetting
Characterization of Distortion Compensation of Additively Manufactured Parts with Accurate Surface Representation
Characterization of Laser Direct Deposited Magnesium Aluminate Spinel Ceramics
Characterization of Metal-polymer Composites for In Situ Direct Ink Write Sensing Applications
Characterization of PLA/Lignin Biocomposite for 3D Printing
Characterization of Polymer Powders for Selective Laser Sintering
Characterization of the Balling Defect in Stainless Steels during Laser Powder Bed Additive Manufacturing
Characterization of Wire-arc Additive Manufactured Hybrid Nickel Aluminum Bronze-stainless Steel Bi-metals
Characterizing the Influence of Print Parameters on Porosity and Mechanical Performance
Chemical Kinetics of Reactive Silver Inks
Comparison of Fatigue Performance Between Additively Manufactured and Wrought 304L Stainless Steel Using a Novel Fatigue Test Setup
Compatibility of Additively Manufactured Cobalt-based Superalloy with Alloy Steel Substrate: Interface Bond Behavior and Failure Mechanism
Compression Behavior of Multi-material Honeycombs: An Experimental Study
Compressive and Bending Performance of Selectively Laser Melted AlSi10Mg Structures
Compressive Properties Optimization of Bio-inspired Sandwich Structures Fabricated by Selective Laser Melting
Compressive Response of Strut-reinforced Kagome Structure with Polyurethane Reinforcement
Computational Modeling of the Inert Gas Flow Behavior on Spatter Distribution in Selective Laser Melting
Computational Modelling with Experimental Validation of IN718 and IN625 Melt Pools in the Laser Powder Bed Fusion Process
Computer-aided Process Planning for Wire Arc Directed Energy Deposition
Conceptual Design for Additive Manufacturing: Lessons Learned from an Undergraduate Course
Constructing Heterogeneous Tissue Structures via Image-guided Intra-scaffold Cell Assembly
Contact Angle Measurement Comparisons of Common Additive Materials and Processes
Correlation of Rotating-bending and Axial Fatigue Testing of LB-PBF 316L Stainless Steel
Creating Toolpaths without Starts and Stops for Extrusion-based Systems
Curing and Infiltration Behavior of UV-curing Thermosets for the Use in a Combined Selective Laser Sintering Process of Polymers
Cyber Security through Side-channels: A Methodology for Implementing a Cyber-physical Hash on Additive Manufacturing Systems
Defect Detection in Metal Additive Manufacturing through Application of In-situ Diagnostics
Defining Design Parameters for Large-scale Extrusion Additive Manufacturing Systems by Estimation of Interlayer Cooling Rates
Design and Development of Low-cost Prosthetic Hand Using Additive Manufacturing with Arduino Control
Design and Manufacture of a Custom Drone Using Additive Manufacturing
Design for Additive Manufacturing in Developing Technologies. Feature Assessment Methodology
Design for Additive Manufacturing: Simplification of Product Architecture by Part Consolidation for the Lifecycle
Design for AM – The Key to the Industrialization of Additive Manufacturing
Design of Optimal Support Structure of Additive Manufacturing Parts Using Surrogate Models
Design Optimization for Laser Metal 3D Printing
Design Paradigms for Vibration-enabled Support Structure Removal
Design Repository Effectiveness for 3D Convolutional Neural Networks: Application to Additive Manufacturing
Design Strategy for Additive Manufacturable, 3D Piezoelectric Nanocomposite
Design, Modeling and Characterization of Minimal Surface Heat Exchangers with Additive Manufacturing
Detection of the Additive Manufacturing(AM) In-process Failures via Deep Learning (DL)
Developing Experimental Capabilities to Enhance Understanding and Performance of Metal Additive Manufacturing Processes
Development of a Circular 3S 3D Printing System to Efficiently Fabricate Alumina Ceramic Products
Development of a Standalone In-situ Monitoring System for Defect Detection in the Direct Metal Laser Sintering Process
Development of Functionally Graded Material Capabilities in Large-scale Extrusion Deposition Additive Manufacturing
Development of Implicit CAD System for Multi-material Additive Manufacturing
Development of In-line Surface Measuring Instruments for Additive Surface Finishing
Development, Production and Post-processing of a Topology Optimized Aircraft Bracket
Dimensional Comparison of a Cold Spray Additive Manufacturing Simulation Tool
Direct-writing by Micro-cold Spray of Yttria (Y2O3) Films for Reactive Metal Casting
Direct-writing SiC with Micro-cold Spray: Velocity Dependence on Film Density
Direct Fabrication of AlSi10Mg Thermal Management Devices onto Silicon Substrate by Selective Laser Melting
Distortion Prevention/support Elimination during Sintering of 3D Printed Copper Parts
Does Vat Polymerization Additive Manufacturing Influence Air Quality?
Drop on Demand Jetting of Molten 6061 Aluminum
Dynamic Build for Additive Manufacturing
Dynamic Defect Detection in AM Parts Using FEA Simulation
Dynamic Measurement of Laser Beam Quality for Selective Laser Melting
Effect of Build Platform Preheating on Microstructure and Mechanical Properties of LB-PBF 316L Stainless Steel
Effect of Composition on Microstructures and Mechanical Properties of SLM-processed 17-4 PH Stainless Steel in As-built and Hardened Conditions
Effect of Heat Input on the Microstructure and Mechanical Properties of Magnesium Alloy Fabricated by Wire and Arc Additive Manufacturing
Effect of Infrared Preheating on the Mechanical Properties of Large Format 3D Printed Parts
Effect of Nb Content on the Corrosion Resistance and Passive Film Composition of Ti-Nb Alloys Fabricated by Selective Laser Melting
Effect of Part Topology on Local Heat Transfer during Laser-powder Bed Fusion
Effect of Position and Orientation on Surface Topography in Laser Powder Bed Fusion of Nickel Superalloy 625
Effect of Process Parameters on Selective Laser Melting Al2O3-Al Cermet Material
Effect of Sensitization and Etching Parameters to Selectively Dissolve Support Structures from PBF-processed Metal Components
Effective Elastic Properties of Additively Manufactured Metallic Lattice Structures: Unit-cell Modeling
Effective Moduli of Fused Filament Fabrication Material with Aligned Mesostructure
Effectiveness Analysis of Powder Removal Methods for Ti-6AL-4V Additive Manufactured Parts Build with Electron Beam Powder Bed Fusion
Effects of Carbide Dissolution on the Microstructure and Fracture Toughness of Ni-Al/WC-86 Composite Coating Produced by Laser Cladding
Effects of Chemical Polishing on Surface Roughness of Additively Manufactured Inconel 625 Channels
Effects of Different Hot Isostatic Pressing Treatments on the Mechanical Performance of EBM Ti-6Al-2Sn-4Zr-2Mo
Effects of Different Hot Isostatic Pressing Treatments on the Mechanical Performance of EBM Ti-6Al-2Sn-4Zr-2Mo (Ti6242)
Effects of Discrete Print Paths on the Stiffness and Strength of Topologically Optimized Structures
Effects of Layer Orientation on Mechanical Properties in Large Area Projection Sintering (LAPS)
Effects of Oxide Formation on Magnetohydrodynamic-based Drop-on-demand Droplet Solidification and Coalescence
Effects of Particle Size Distribution on Surface Finish of Selective Laser Melting Parts
Effects of Powder Particle Size and Binder Droplet volume on Binder Jetting Part Quality
Effects of Printing Conditions on Cell Distribution within Microspheres during Inkjet Printing of Cell-laden Bioink
Effects of Spatial Energy Distribution on Defects and Fracture of LPBF 316L Stainless Steel
Effects of Unit Cell Size on the Mechanical Performance of Additive Manufactured Lattice Structures
Efficient Computation of Heat Transfer and Molten Pool Convection during Multi-layer Multi-pass Laser Powder Bed Fusion
Electrical and Mechanical Properties of Fused Filament Fabrication of Polyamide 6 / Nanographene Filaments at Different Annealing Temperatures
Electroforming Process to Additively Manufactured Microscale Structures
Electron Beam and Laser Hybrid Preheating Strategy for Powder Bed Fusion Process and Applications
Electrophotographic Multi-layer Powder Pattern Deposition for Additive Manufacturing
Electrostatic Discharge Performance of Nanomodified Polyamide 6 Composite for 3D Printing
Elevated Temperature Mechanical and Microstructural Characterization of SLM SS304L
Emissivity Mapping: A Method for Accurate Surface Temperature Measurements in Powder Bed Fusion Systems Using Infrared Thermography combined with Multi-wavelength Pyrometry
Emittance and True Temperature Measurement at the NIST Additive Manufacturing Metrology Testbed
End-to-end Study of Microstructural Evolution and Defect Distribution for L-PBF IN78
Energy Absorption Measurement in Laser Deposition Additive Manufacturing
Energy Consumption and Mechanical Proprietaries of Hybrid Deposition and Micro Rolling
Engineered Platelets for Metals Additive Manufacturing
Enhancement of the Bonding Strength between Layers with Dissimilar Materials in Fused Filament Fabrication via Z-pinning Approach
Enhancing the Predictability of the Mechanical Performance of Additively Manufactured Conformal Negative Stiffness Honeycombs
Environmental Impact of 3D-printed 18Ni-300 Maraging Steel
Estimation of Filament Temperature History and Part Distortion in Fused Deposition Modeling (FDM) Process
Evaluation of a Feed-forward Laser Control Approach for Improving Consistency in Selective Laser Sintering
Evaluation of the Mechanical Properties of Ti64 Periodic Lattices Manufactured by Selective Laser Melting by Gibson-Ashby Model, Finite Element Analysis and Mechanical Tests
Exact Scan Pattern Dependent Thermo-mechanical Finite Element Simulation of Small Parts (50 mm^3) Produced Using Metal Powder Bed Fusion Process
Examination of the LPBF Process by Means of Thermal Imaging for the Development of a Geometric-specific Process Control
Expedited Optimization of AM Materials Using Miniaturized Testing
Experimental Investigation of Effect of Alginate Hydrogel Viscosity on Profile Accuracy of Bioprinted Constructs
Experimental Investigation of Extrusion Based Bioprinting: Effect of Extrusion Pressure of Alginate Hydrogel on Printed Profile Accuracy
Experimental Investigation Of Stratasys J750 PolyJet Printer: Predictive Modeling of Color Accuracy
Experimental Validation of the Thermal Distribution Predicted by the Graph Theory Approach: Application to Laser Powder Bed Fusion
Explanatory Multiphysics Modelling of Generated Heat in Vat Photopolymerization
Exploration of Reactive Extrusion in Additive Manufacturing
Exploration of Scalable Build Spaces for Cable-driven 3D Printers
Exploring Additive Manufacturing Techniques in Creating a Model Aircraft
Exploring the Effects of Elevated Resin Temperatures on Vat Photopolymerization Process Parameters and Part Mechanical Properties
Exploring the Use of Artificial Neural Network Machine Learning for Process Quality Evaluation of Powder Bed Fusion in Additive Manufacturing of Lightweight Structures
Extrusion-based 3D Printing of Biomass Materials for Construction
Fabricating Optimized Composite Structures via Multi-axis Material Extrusion
Fabrication and Characterization of 3D Printing Induced Orthotropic Functional Ceramics
Fabrication and Characterization of High-Purity Alumina Ceramics Doped with Zirconia aia Laser Direct Deposition
Fabrication of Three-dimensional Structured Ti-6Al-4V/TiN Metal Matrix Composite in Laser Powder Bed Fusion Using Selective Laser Nitriding
Fast and Simple Printing of Graded Auxetic Structures
Fatigue Behavior of Additive Manufactured 304L Stainless Steel Including Surface Roughness Effects
Fatigue Behavior of Laser Beam Directed Energy Deposited Inconel 718 at Elevated Temperature
Fatigue Behavior of LB-PBF Ti-6Al-4V Parts Under Mean Stress and Variable Amplitude Loading Conditions
Fatigue Behavior of Post-build Surface Processing on Electron Beam Melted Ti-6Al-4V
Fatigue Crack Growth Threshold Effects of Texture, Microstructure, and Residual Stress in SLM Alloy 718
Fatigue Life Prediction of Additive Manufactured Materials Using a Defect Sensitive Model
Fatigue Performance of Additively Manufactured Stainless Steel 316L for Nuclear Applications
Fatigue Performance of Stainless Steel 316L Fabricated by Extrusion-based Additive Manufacturing
Feasibility Analysis of Using Maraging Steel in a Wire Arc Additive Process for High-Strength Tooling Applications
Feasibility of On-line Defect Detection with Current Thermal Tomography Techniques
Finite Element Process Simulation Technology for Additive Manufacturing
Forging Made Possible-hybrid Casting Forging and Milling Technology
Formation of Nitride and Carbide Compounds via Laser Synthesis
Forming, Microstructure Evolution and Mechanical Properties of Wire Arc Additively Manufactured AZ80M Magnesium Alloy Using Gas Tungsten Arc Welding
Framework for CAD to Part of Large Scale Additive Metals Manufacturing in Arbitrary Directions
Freeform Extrusion Fabrication of Alumina and Zirconia Functionally Graded Materials
Frequency Inspection of Additively Manufactured Parts for Layer Defect Identification
Functionally-graded Lattice Infill Design Optimization for Laser Powder Bed Fusion
Funding Opportunities for Advanced Manufacturing at the National Science Foundation
Fused Deposition Modeling with Metal Powder Filled Filaments
Gaining New Insight into Metal Additive Manufacturing Processes Using Ontologies and Visualization
Glass-reinforced, Recycled PET Material as Feedstock for Fused Filament Fabrication
Glocal Integrity Formation in Hybrid Additive Manufacturing
Graded Multimaterial Printing via L-PBF: Design, Development, and Characterization of AISI 316L and Fe35Mn Graded Specimens
Green Bio-printing: An Investigation of Suitable Bio-inks to Support Plant Tissue Growth
Guided Cell Migration on a Substrate with Graded Micropillars
Heterogeneous Sensing-based In-process Quality Monitoring of Single-tracks Built using Laser Powder Bed Fusion Additive Manufacturing Process
Hierarchical Optimization of Functionally Graded Lattice Structure for Additive Manufacturing
High-resolution Metal Printing by Discrete Ejection, Melting, and Deposition of Microparticles
High-throughput Screening of Composite Formulations for Metal Additive Manufacturing by Combining Inkjet Printing with Point-wise Laser Melting
High Definition Scanning for Build to Build Feedback in PBFAM
High Rate Monitoring of Laser Motion and Melt Pool Dynamics during Laser-powder Bed Fusion
How AM Parts Fail: Influence of Build Orientation and Post Machining
How Powders Incorporate into the Melt Pool in Deposition: An In-situ Study on Powders Overcoming the Melt Pool Surface Tension
Hybrid Additive Manufacturing for Embedded Wire Interconnections in 3D Printed Thermoplastics
Hybrid Foam Prototyping for Rapid Casting
Hybrid Manufacturing: Role of Contoured Geometries in Directed Energy Deposition of Stainless Steel 316L
Hybrid Material Extrusion with Multi-process Technologies
Hydrothermal-assisted Powder Bed Fusion of Ceramics for Achieving High Green Density
Identifying the Formation of Laser Powder Bed Fusion Defects In-situ by Coupling High Speed X-ray and Infra-fed Imaging
Imaging and Analysis of Binder-powder Interactions in Metallic Binder Jet Printing.
Impact Energy Absorption Ability of Thermoplastic Polyurethane (TPU) Cellular Structures Fabricated via Powder Bed Fusion
Impact of BAAM Parameters on Material Meso-structure and In-process Printing Mechanical Stability
Impact of Embedding Cavity Design on Thermal History between Layers in Polymer Material Extrusion Additive Manufacturing
Impact of Flow Aid on the Flowability and Coalescence Behavior of Polymer Laser Sintering Powder
Impact Strength of 3D Printed Polyether-ether-ketone (PEEK)
Implementation of 3D Printer in Material Processing Lab Course: An Educational Paper
Implementation of Spetropyrometry within Electron Beam Powder Bed Fusion for Accurate Surface Temperature Measurements
Improving the Strength of Additively Manufactured Concrete Structures via Intra and Inter-layer Fiber Reinforcement
Improving the Strength of Binder Jetted Pharmaceutical Tablets through Tailored Polymeric Binders and Powders
In-direct Hybrid AM: Advancing Metal Castings via 3D Sand-printing
In-plane Pure Shear Deformation of Cellular Materials with Novel Grip Design
In-Process UV-Curing of Pasty Ceramic Composite
In-situ and Ex-situ Alloying of AISI 316L in Laser-based Powder Bed Fusion Additive Manufacturing
In-situ Defects Detection and Morphology Reconstruction of Electron Beam Selective Melting via Dual-detector Electron Optical Imaging System
In-situ Full-field Mapping of Melt Flow Dynamics in Laser Metal Additive Manufacturing
In-situ Laser Excited Frequency Response of Additive Manufactured Parts
In-situ Layer-wise Quality Control for Laser-based Additive Manufacturing Using Image Series Analysis
In-situ Local Part Qualification of SLM 304L Stainless Steel through Voxel Based Processing of SWIR Imaging Data
In-situ Residual Stress Determination in Laser Powder Bed Fusion Using a Residual Stress Dynamometer
In Situ Combination of Selective Laser Melting and Selective Laser Erosion for Edge Effect Removal
Increasing the Interlayer Bond of Fused Filament Fabrication Samples with Solid Cross-sections Using Z-pinning
Industrialization of Laser Wire Directed Energy Deposition for Large Ti 6-4 Aerospace Components
Industrializing the Robotized Laser Wire-feed Metal Additive Manufacturing (LWMAM) From 3-D Model to NNS Component
Influence of Bed Heating and Drop Velocity on the Equilibrium Saturation Level in Binder Jetting
Influence of Build Temperatue on LBM of Tungsten
Influence of Contour Procedures on Surface Improvement of Additive Manufactured Components
Influence of Impacting Particle Size and Stacking Fault Energy on Ag Films Deposited by Direct Writing
Influence of Part Microstructure on Mechanical Properties of PA6x Laser Sintered Specimens
Influence of Powder Particle Size Distribution on the Printability of Pure Copper for Selective Laser Melting
Influence of the Process Parameters and Feature Geometries on Material Characteristics of Ti-6Al-4V Thin Strut Features Fabricated by Laser Powder Bed Fusion Additive Manufacturing
Inkjet Printing of Geometrically Optimized Electrodes for Lithium-Ion Cells: A Concept for a Hybrid Process Chain
Integrated Hardfacing of Stellite-6 Using Hybrid Manufacturing Process
Integration Challenges with Additive/subtractive In-envelope Hybrid Manufacturing
Interrogation of Mid-build Internal Temperature Distributions within Parts Being Manufactured via the Powder Bed Fusion Process
Inverse Metrology Approach: Using Simulations to Understand Process Monitoring in Laser-based Additive Manufacturing
Investigating Applicability of Surface Roughness Parameters in Describing the Metallic Additive Manufacturing Process
Investigating the Build Consistency of a Laser Powder Bed Fused Nickel-based Superalloy, Using Alternative Mechanical Test Methods
Investigating the Gap Between Research and Practice in Additive Manufacturing
Investigating the Porosity Formation Mechanism in Electron Beam Melted Hydride-Dehydride (HDH) Ti-6Al-4V via Synchrotron X-ray Microtomography and Dynamic X-ray Radiography (DXR)
Investigating the Production of Gradient Index Optics by Modulating Two-photon Polymerisation Fabrication Parameters
Investigating Transient Pressure Variations during Extrusion-based Additive Manufacturing
Investigation of Aluminum Cerium Alloy Laser Melting Dynamics under Additive Manufacturing Conditions
Investigation of Effect of Heat Treatment Process on PVDF Additively Manufactured Parts
Investigation of Influence of Various Process Parameters on Mechanical Characteristics of Laser Sintered Aluminum Reinforced Polyamide 12
Investigation of Mechanical Properties and Dimensional Accuracy of an UV-curable Silicone Printed with DLP
Investigation Of PBFAM Flaw Formation through High-speed Video Monitoring
Investigation of the Oxygen Content of Additively Manufactured Tool Steel 1.2344
Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to Weld Seam Strength
Investigations on the Effect of Powder Bed Fusion Processing Parameters on Optical Emissions and Final Part Quality Based on Single Track Deposits
Issues Related to Powder-bed Electron Beam Additive Manufacturing
Joining of Copper and Stainless Steel 304L Using Direct Metal Deposition
Lab-designed Laser-based 3D Printer
Large-scale Additive Manufacturing of Concrete Using a Six-axis Robotic Arm for Autonomous Habitat Construction
Large-scale Identification of Parts Suitable for Additive Manufacturing: An Industry Perspective
Large-scale Thermoset Pick and Place Testing and Implementation
Large Area Projection Sintering (LAPS) for Low Porosity Nylon 12 Parts
Large Effect of Surface Oxide on Measurement of Liquid Metal Viscosity
Large Format Additive Manufacturing for Low-head Hydropwer
Large Scale Metal Additive Manufacturing Using Hot-wire Laser Metal Deposition
Laser-foil-printing Additive Manufacturing of Multi-material Components from 304L Stainless Steel to Ti-6Al-4V Alloy with V Intermediate Layers
Laser-vapor Interaction Dynamics during Multi-beam Laser Powder Bed Fusion
Laser Additive Manufacturing of Dissimilar Metals for Nuclear Reactor Applications
Laser Cooking: A Novel Processing Technique for Food Layered Manufacture
Laser Powder Bed Fusion of AlSi10Mg Powders with Narrow Particle Size Distribution
Laser Sintering of Pine/Polylactic Acid Composites
Lattice Metamaterial Design for Enhanced Stretchability and Energy Dissipation via Topology Optimization
Launching a Multidisciplinary Resident+Online Graduate Degree Program in Additive Manufacturing and Design: Challenges and Lessons Learned
Layer-wise Anomaly Detection and Process Control Using a Machine-agnostic Algorithm for Semantic Segmentation of Powder Bed Images
Layered Assembly: Digital Fabrication of Voxel-based Multi-material Parts
Learning Design for Additive Manufacture through Competition: The 3rd Annual 3D Printed Aircraft Competition
Linear Friction Welding of Additive Manufactured Parts
Machine Learning Assisted Control of Melt Pool Geometry in Nickel-based Superalloys under Constrained Computational Resources
Machine Learning Based Monitoring of Advanced Manufacturing
Manufacturing an On-chip Cooler System for IC Using the LCD-based Stereolithography Technology
Manufacturing and Application of PA11-glass Fiber Composite Particles for Selective Laser Sintering
Manufacturing Development For Army Relevant Ultra-high Strength Steel
Manufacturing of Nanoparticle-filled PA11 Composite Particles for Selective Laser Sintering
Manufacturing Process and Parameters Development for Water-atomized Zinc Powder for Selective Laser Melting Fabrication
Mapping Melt Pool Thermal Characteristics to Varying Scan Strategies and Porosity in Laser Powder Bed Fusion
Material-structure-property Optimization and In-process Monitoring of 3D Printed Bone Tissue
Material Flow Control via Image Reconstruction in Concrete Additive Manufacturing
Measurement of Energy Transfer and Balance in Laser-induced Melt Pool
Mechanical and Electrical Properties of Selective Laser Melted Carbon Mixed Copper and Copper-chromium Alloy
Mechanical Behavior of Additively-manufactured Gyroid Lattice Structure under Different Heat Treatments
Mechanical Metamaterial Development for 3D Discriminatory Logic Systems
Mechanical Performance of Additively Manufactured Fibre-reinforced Functionally Graded Lattices
Mechanical Performance of Laser Sintered Poly(ether ketone ketones) (PEKK)
Mechanical Properties Enhancement of Additively Manufactured Ti-6Al-4V by Machine Hammer Peening
Mechanical Properties of Selective Laser Melting IN718 Subjected to Experimental Hot Isostatic Pressing Cycles
Mechanical Response of Optimized Unit Cell Lattice Structures in Comparison with Variable Density and Homogeneous Periodic Patterns
Melt Flow Characterization of Filaments Used in Fused Filament Fabrication Additive Manufacturing
Melt Pool Geometry Modeling and Monitoring via In-situ Vision System for Powder Fed Laser Fusion Process
Melt Pool Measures and Effective Sensor Bandwidth for Direct Energy Deposition
Melt Pool Monitoring for Control and Data Analytics in Large-scale Metal Additive Manufacturing
Metal Casting Applications Using Zirconia Molds Produced by NanoParticle JettingTM
Metallurgical and Mechanical Characterizations of AINSI 316L Parts Produced by WAAM and LWAM
Method for Determining Light Intensity in Large Area Projection Sintering (LAPS)
Methodical Design of a 3D-Printable Orthosis for the Left Hand to Support Double Bass Perceptional Training
Microstructure and Mechanical Properties of In Situ Welded EBM-built Parts
Microstructure and Mechanical Properties of Nickel Superalloys and Ti6Al4V Fabricated Using a Renishaw’s Multi-laser Powder Bed Fusion System
Microstructure and Tensile Properties of Hybrid Additive/subtractive Manufactured Al5Si Alloy
Microstructure, Surface Roughness and Dimensional Accuracy for As-built Thin Wall Inconel 718 with Laser Powder Bed Fusion
Mitigating Near-surface Porosity in a Laser Powder Bed Fusion Process
Mitigating Residual Stress and Distortion in Additive Manufacturing by Topology Optimization of Latticed Support Structures
MMHT Based In-situ Process Monitoring and Fault Detection in Additive Manufacturing
Modeling of the Vapor Plume and Its Interaction with Ambient Gas and Powder in the PBF-LB\M Process
Modeling Thermal Expansion of a Large Area Extrusion Deposition Additively Manufactured Parts Using a Non-homogenized Approach
Modelling of Binder-powder Interactions for the Improvement of Part Density in Binder Jet Printing
Multi-material Direct Energy Deposition for Custom Alloy Compositions
Multi-material Process Planning for Additive Manufacturing
Multi-material Soft-matter Robotic Fabrication: A Proof of Concept in Patient-specific Neurosurgical Phantoms
Multi-material Topology Optimization with Arbitrary Volume Constraints for Additive Manufacturing
Multi-objective Topology Optimization of Additively Manufactured Heat Exchangers
Multi-sensor Approach to Determine the Effect of Parameters and Geometry in Laser Powder Bed Fusion
Multiple Scanning to Reduce Spatter of Nickel-based Supperalloy in Electron Beam Selective Melting
Multiscale Fatigue Modeling of Additively Manufactured Metallic Materials
Mylar Capacitor Edge Margin Reduction Using Robust Dielectric
Nested Size Effects Observed in Nanoindentation Studies of Additively Manufactured 316L Stainless Steel
New Opportunities for Additive Manufacturing by Selective Electron Beam Melting
New Scanning Strategies and Support Structures for Reduced Overheating on Downfacing Regions of Direct Metal Printed Parts
Nonlinear Model Predictive Control of UV-induced Curing Process of Thick Composite Parts
Nozzle-integrated Pre-deposition and Post-deposition Heating of the Platform Bed in Polymer Based Additive Manufacturing
Numerical and Experimental Investigation of Interfacial Fluid-particle Flow in Binder Jet 3D Printing
Numerical Modeling and Evaluation of Material Jetting-based Additive Manufacturing
Numerical Modeling of Transport Phenomena in Melt-pool for Laser-wire Direct Deposition Process
Numerical Simulation and Experiment Measurement of the Thermal History for Plastic Parts in Fused Filament Fabrication (FFF) Process
Numerical Simulation and Experimental Validation of Solidification Phenomena in Functionally Graded Ti-Al Composite Coatings Fabricated with Laser Metal Deposition
Numerical Simulation of Extrusion-based Additive Manufacturing for Process Parameter Planning in a Polymer Dispensing System
On the Heat Treatments of a Carbon Steel for Gear Applications
On the Influence of Process Interruptions during the SLM Process on the Fatigue Resistance of AlSi12
On the Physical Characteristics of 3D Printed Sand for Metal Casting Tooling
One-step, Direct Write Aerosol Impact Consolidation Method for Fabricating Thin Films of TiO2 on Glass
Optimization of the Additive Manufacturing Process for Acoustic Metamaterials
Optimizing the Tensile Strength for 3D Printed PLA Parts
Out-of-plane Printing with Big Area Additive Manufacturing
Overview of In-situ Temperature Measurement for Metallic Additive Manufacturing: How and then What
Oxygen Induced Melt Pool Morphology of Selective Laser Melting
Parallelizing Energy Deposition for Powder Bed Additive Manufacturing via a 2D-Laser Array
Parameter Optimization of AlSi10Mg Alloy System in 200W Direct Metal Laser Sintering Process
Parametric Analysis to Quantify Process Input Influence on the Printed Densities of Binder Jetted Alumina Ceramics
Parametric Study of In Situ Melt Pool Dynamics and Microstructure of WE43 Processed by Laser Powder Bed Fusion
Part-level Thermal Modeling in Additive Manufacturing Using Graph Theory.
Part-scale Coupled Process-microstructure Model for Additive Manufacturing of Nickel Alloy
Part Remanufacturing Using Hybrid Manufacturing Processes
Particle Trajectories, Focusing, and Fragmentation in Supersonic Aerosol Deposition
Paste-based 3D Printing of Metallic Materials: Effect of Binders and Precursor Sizes
Patenting Activity Dynamics of Additive Manufacturing for Pharmaceutical Applications
Path Planning for Wire and Arc Additive Manufacturing of an Underwater Thruster
PENELOPE: A New Solution for In-situ Monitoring and Defect Removal in L-PBF
Penetration Performance of Additively Manufactured Ultra High Strength Steel Fragment Simulating Projectiles
Permeability Analysis of Polymeric Porous Media Obtained by Material Extrusion Additive Manufacturing
Phase-field Simulation of Solidification Morphology in Laser Powder Deposition of Ni-based Binary Alloys
PLLA-infused Citric Acid-based Bioresorbable Vascular Scaffolds 3D Printed via microCLIP
Polymer Welding of 3D Printed Hybrid Flexible Electronics for Patient-specific Wearables and Orthotics
Porosity Analysis and Pore Tracking in Ti64 Tensile Specimen by Micro-CT
Post-deposition Thermal Expansion Characterization of Invar Components Fabricated by Direct Energy Deposition Methods
Post-processing Heat Treatments and Residual Stress Behavior of AlSi10Mg
Potentials of Artificial Intelligence in Additive Manufacturing
Powder Particles Design in Laser Sintering - Material Optimization of Technical Plastic Powder
Powder Variation and Mechanical Properties for SLM 17-4 PH Stainless Steel
Pre-treatment of Fused Deposition Modeling (FDM) Filament for Improved Interfacial Layer Adhesion Using an Atmospheric Pressure Plasma Discharge
Precipitation Hardening Behavior of Additively Manufactured Materials
Predicting and Controlling the Thermal Part History in Powder Bed Fusion Using Neural Networks
Predicting Film Thickness of Aerosol Deposited Films
Predicting Porosity in Laser-based, Additively Manufactured 316 Stainless Steel Using the Multiphysics Discrete Element Method
Prediction and Control of Melt Pool Geometry in Additive Manufacturing Processes: A Machine Learning Based Approach
Prediction of Layer Thickness Effects in Laser Powder Bed Fusion
Prediction of Mechanical Properties of Fused Deposition Modeling Made Parts Using Multiscale Modeling and Classical Laminate Theory
Preliminary Study on Reduced Order Modeling for Welding Pool Transient Analysis during Wire Arc Additive Manufacturing
Preparation of Ordered Perovskite Needle-like Crystal Films by Electric Field and Micro-droplet Jetting 3D Printing
Pressure Dependence of the Laser-material Interaction under High Speed Welding and Laser Powder Bed Fusion Conditions Probed by in Situ X-ray Imaging
Printability of Metallic Alloys in Laser Powder Bed Fusion Process
Printing SiO2 Dielectrics Using Reactive Inks at Low Temperature
Process-structure-property Relationships in the Coating of Stellite on Inconel 718 by Directed Energy Deposition Process
Process Integrated Production of WC-Co Tools with Local Cobalt Gradient Fabricated by Binder Jetting
Process Mapping for Laser Hot Wire Additive Manufacturing
Process Parameter Induced Lack of Fusion Defects in AlSi10Mg
Process Parameter Optimization in Powder Bed Fusion for Polyphenylene Sulfide through Design of Experiments
Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components
Process Plateaus, Not Peaks, in Laser-powder Bed Fusion of 316L Stainless Steel
Process Routes Towards Novel Polybutylene Terephthalate – Polycarbonate Blend Powders for Selective Laser Sintering
Processing and Characterization of 3D-printed Polymer Matrix Composites Reinforced with Discontinuous Fibers
Production of Geometrically Complex Glass Parts Using Indirect Selective Laser Sintering
Pyrometry Linked to Voids in Additively Manufactured Metals: SAND2019-4035 A
Quantification of Metal Powder Layer Uniformity for Additive Manufacturing Using Transmission X-ray Imaging
Quantitatively Revealing the Dynamics in Laser Additive Manufacturing Processes by High-speed Synchrotron X-ray Imaging and Diffraction
Rapid Solidification Microstructure of Binary NiNb during Laser Powder Bed Fusion: Non-equilibrium Phase Field Modeling and Experimental Validation
Rapid Stereolithography of Polymer-derived SiCN Ceramics
Rayne Zheng: TBA
Reactive Inkjet of Quantum Dot – Silicone Composites
Reactive Powder Bed 3D Printing – A New Paradigm in Materials and Scalability?
Real-time 3D Surface Measurement in Additive Manufacturing Using Deep Learning
Real Time Observation of Binder Jetting Printing Process Using High-speed X-ray Imaging
Realization of the P20 Tool Steel and Mild Steel for Building Composite Die through Hybrid Layered Manufacturing Process
Recent Advances in Direct-write Additive Manufacturing of Thermoset Composites
Reconditioning 304L Stainless Steel Powder through Plasma Spheroidization for Use in the Selective Laser Melting Process
Recyclability of Polyphenylene Sulfide Powder in Laser Powder Bed Fusion
Reducing Computer Visualization Errors for In-process Monitoring of Additive Manufacturing Systems Using Smart Lighting and Colorization System
Reduction Expansion Synthesis of Designed Metal Parts
Refinement Technique for Robotically Path-planned Functional Gradients
Relationship Between Powder Bed Temperature and Microstructure of Laser Sintered PA12 Parts
Relative Significance of Heat Loss through Radiation and Convection in Extrusion Based Additive Manufacturing
Repair of High-value Plastic Components Using Fused Deposition Modeling
Replicate, Adapt, Optimize: A Crawl, Walk, Run Approach to Design for Additive Manufacturing
Residual Heat Based Laser Power Adjustment for Additive Manufacturing Process
Residual Stress Induced Fracture of Additive Manufactured Parts Based on Modified Inherent Strain Method
Residual Stresses Measurements in Hybrid Additive Manufacturing
Revealing Particle-scale Powder Spreading Dynamics in Powderbed-based Additive Manufacturing Process by High-speed X-ray Imaging
Rheological and Cure Behavior of a Dual-cure Thermoset For DIW
Rheology and Applications of Particulate Composites in Additive Manufacturing
Robot-based Hybrid Manufacturing Process Chain
Roughness Parameters for Classification of As-built and Laser Post-processed Additive Manufactured Surfaces
Scaling Laws of Fused Filament Fabrication
Scaling Up Build Rates in Selective Laser Melting of Metals Based on Dimensionless Parameters
Scan-by-scan Thermal Modeling for Defect Prediction at the Part Scale
Scenario-based Approaches for In-Situ Process Monitoring
Selection Considerations of Orthopedic Implants for Electron Beam Melting Production
Selective Electron Beam Melting of Al-Cu-Mg Alloy: Microstructure Characterization and Mechanical Performance
Selective Laser Flash Sintering of Yttria-Stabilized Zirconia
Selective Laser Melted 316L Stainless Steel Processing and Microstructure Effects on Local and Bulk Thermal Conductivity
Selective Laser Melted Functionally Graded Biodegradable Porous Iron
Selective Laser Melting Fabrication of Fully Dense Ultra-high Strength Martensitic Steel
Selective Laser Melting of a High-Nb TiAl Alloy
Selective Laser Melting of Aluminum-ceramic Composites
Selective Laser Melting (SLM) of Ti-6Al-2Sn-4Zr-2Mo (Ti6242) Alloy: Parameter Optimization
Self-powered Hydrophone with Broadband Frequency and Rationally Designed Directivity Pattern via 3D Printing Using Piezoelectric Metamaterials
Sensor Based Prediction of Material Defects
Shielding Gas Visualization in Additive Manufacturing: A Review
Simulated Effect of Laser Beam Quality on the Robustness of Laser-based AM System
Simulating Droplet Break-up in Liquid Metal Printing Processes
Simulating Powder Spreadability in the Selective Laser Melting Process Using the Discrete Element Method
Simulation of Hybrid WAAM and Rotation Compression Forming Process
Simulation of Mutually Dependent Polymer Flow and Fiber Reinforced in Polymer Composite Deposition Additive Manufacturing
Simulation of Path Strategies and Analysis of Residual Stress and Deformation in Wire and Arc Additive Manufacturing
Size Effect on the Fracture Characteristic of Cellular Structures under Tensile Load
SkyBAAM Large Scale Fieldable Deposition Platform System Architecture
Smart Metal Structures with Embedded Strain Sensing Enabled by Hybrid Manufacturing
Spatially Resolved Particle Size Distribution and Morphological Characterization of Powder Ejecta Created by the Laser Powder Bed Fusion Process
Spatially Variant Structures: Unlocking the Full Potential of Additive Manufacturing
Spatter in Laser Powder Bed Fusion: The Good, the Bad and the Ugly
Spatters, Pores and Mechanical Properties of AlSi10Mg Parts Fabricated by Selective Laser Melting
SS410 Process Development and Characterization
Stereolithography of Highly Elastic Material Using Natural Rubber Latex
Strengthening of 304L Stainless Steel by Addition of Yttrium Oxide and Grain Refinement during Selective Laser Melting
Stress and Deformation Evaluation of Novel Toolpath in Powder Bed Fusion Process
Stress Corrosion Cracking of an Additively Manufactured Austenitic Stainless Steel
Structural Modification Induced by Laser Processing of Thermoelectric Materials
Structure-property Relationships in HIP Additively Manufactured Thermoplastic Composites
Study of Printing Direction, Post-processing Effects on Mechanical and Material Properties of EOS MS1 Maraging Steel
Study on the Formability, Microstructures and Mechanical Properties of AlCrCuFeNix High-entropy Alloys Prepared by Selective Laser Melting
Study on the Numerical Simulation of Laying Powder for Selective Laser Melting Process
Study on the Selective Laser Sintering of Thermoplastic Polyurethane/Nd-Fe-B Composites Powder
Subject Specific Bone Biomodel 3D Printing from a Ster-saccharide Polymerization Powder-infiltrant Formulation
Supersonic Cold Spraying for Advanced Materials: Scalable Direct Writing Deposition Method
Surface Analysis and Performance Prediction in Laser Powder Bed Fusion Additive Manufacturing
Surface Conditioning for Additively Manufactured Titanium Implants for Temporary Insertion in the Oral and Maxillofacial Surgery
Surface Damage of an AM-AlSi10Mg Alloy Exposed to Corrosive Environments with Lack of Fusion Defects and Powder Contamination
Surface Finish Effects on the Very High Cycle Fatigue Behavior of Laser Beam-powder Bed Fused Inconel 718
Tailored Modification of Flow Behavior and Processability of Polypropylene Powders in SLS by Fluidized Bed Coating with in Situ Plasma Produced Silica Nanoparticles
Tailoring Microstructure through Beam Shaping
Tailoring Physical Properties of Shape Memory Polymers for FDM-type Additive Manufacturing
Targeted Algorithms for Defect Mitigation in Selective Laser Melting
Technique for Processing of Continuous Carbon Fibre Reinforced PEEK for Fused Filament Fabrication
Tensile and Compression Test for Specimens Developed Using an Algorithm of Path Optimization
Tensile and Fatigue Properties of Ti6Al4V Fabricated Using a Renishaw’s 500Q Powder Bed Fusion System
Tensile Property Variation with Wall Thickness in Selective Laser Melted Parts
Tensile Strength of Ti-6Al-4V from Interlayer Milling during LENS Deposition
The Development Status of the National Project by Technology Research Association for Future Additive Manufacturing (TRAFAM) in Japan
The Digital Twin in Metal Additive Manufacturing – A Paradigm Integrating Modeling, Sensing, and Machine Learning for Defect Prediction.
The Effect 4D Printing Infill Patterns on the Shape Memory Effect of Shape Memory Polymers
The Effect of Cell Size and Surface Roughness on the Compressive Properties of ABS Lattice Structures Fabricated by Fused Deposition Modeling
The Effect of Hot Isostatic Pressing on Thermal Conductivity, Microstructure, Crack Healing of Additively Manufactured Pure Tungsten
The Effect of Laser Surface Treatment on the Fatigue Behavior of Additive Manufactured Metallic Materials
The Effect of Particle Size on Powder Flowability and Mechanical Behavior of Ceramic Samples fabricated by Binder Jetting Additive Manufacturing
The Effect of Primary Process Parameters on Porosity Population Characteristics in Alloy 718
The Effect of Print Speed on Surface Roughness of Parts Produced Using Binder Jet 3D Printing
The Effects of Gravity on Laser Wire Out of Position Deposition for Additive Manufacturing
The Enriched Analytic Solution Method for Thermal Modeling of Laser-based Additive Manufacturing Processes
The Impact of Porosity on the Mechanical Properties of 304L Stainless Steel Fabricated by Selective Laser Melting
The Impact of Thermal Processing Conditions on Mechanical Strength and Dimensional Accuracy for Fused Filament Fabrication of Ultem 1010
The Influence of Cellular Sub-grain Microstructure on Mechanical Deformation: An Experimental Investigation
The Investigation of Process Parameters on the Structural Integrity of an Additively Manufactured Nickel-based Superalloy
The Mechanism of Cellular Sub-grain Microstructure Formation in Additively Manufactured (AM) 316L Alloy: A Computational Study
The Porosity and Mechanical Properties of H13 Tool Steel Processed by High-speed Selective Laser Melting
The Tribological Performance of SLM 316L Stainless Steel under Dry Sliding Conditions
Then, Now, and What's Ahead
Theory on the Continuation of Melting Processes as Basic Requirement for Robust Processing Conditions in Laser Sintering of Polymers
Thermal Analysis of 3D Printed Continuous Fiber Reinforced Thermoplastic Polymers for Car Part Applications
Thermal Analysis of Thermoplastic Materials Filled with Chopped Fiber for Large Area Printing
Thermal Boundary Conditions in Finite Element Modeling of Laser Powder Bed Fusion
Thermal Expansion Behavior Of Various Contents Of CNTs Reinforced AlSi10Mg Composite Fabricated via Selective Laser Melting
Thermal Process Monitoring for Wire-arc Additive Manufacturing using IR Cameras
Topology Optimization Case Study of a Military Vehicle Door Hinge to Produce a Replacement Part Using Additive Manufacturing
Topology Optimization for Anisotropic Thermomechanical Design in Additive Manufacturing
Topology Optimization of a Satellite Component for Additive Manufacturing
Topology Optimization of Lattice Structure Unit Cell for Convective Heat Transfer Applications
Topology Optimization of Support Structures Considering the Distortion Minimization in Laser Powder-bed Fusion Additive Manufacturing
Towards a Micromechanics Model for Fiber Composite 3D Printed Parts
Towards Real-time NDT with Hyperspectral X-ray Data
Towards the Real-time Control - A Meltpool Prediction Based Scan Strategy
Towards Volumetric Manufacturing of Ceramics via Microwave Holography
Types of Spatters and Their Features and Formation Mechanisms in Laser Powder Bed Fusion Additive Manufacturing Process
Ultrasonic Embedding of Continuous Carbon Fiber into Thermoplastic 3D Printed Parts
Ultrasonic NDE as a Process Parameter Development Tool for Laser Powder Bed Fusion Additive Manufacturing
Understanding Design Process in AM via Eye-tracking Experiments
Understanding Powder Spreading for Powder Bed Fusion Additive Manufacturing
Understanding the Influence of Energy-density on the Layer Dependent Parts Properties in Laser-sintering of PA12
Unlocking Technology for AM Mass Production Trends
Unveiling Bioinks Inventions Trends: A Global Patentometric Landscape
Use of 3D Printed Molds for Foam in Place Prototyping Cost and Time Reduction for Optimization in DFM/A
Use of Non-spherical Hydride-DeHyride (HDH) Powders in Powder Bed Fusion Additive Manufacturing
Using Heterogeneous In-process Sensor Data To Detect Lack-of-fusion Defects In Directed Energy Deposition Of Titanium Alloy (Ti-6Al-4V) Parts
Using Large-scale Additive Manufacturing to Fabricate Wind Turbine Nacelle Structures
Using Machine Learning to Guide Alloy Design and Compatibility with Directed Energy Deposition
Using Non-gravity Aligned Welding in Large Scale Additive Metals Manufacturing for Building Complex Parts
Using Parallel Computing Techniques to Algorithmically Generate Voronoi Support and Infill Structures for 3D Printed Objects
Using Wax Filament Additive Manufacturing For Low-volume Investment Casting
Validated Computational Modelling Techniques for Simulating Melt Pool Ejecta in Laser Powder Bed Fusion Processing
Validating Thermographic Testing in Fused Deposition Modeling
Variation of Microstructure, Phase Formation and Hardness in Laser Powder Bed Fusion Inconel 718 Cuboids
Vat Photopolymerization of Latex: Decoupling Viscosity and Molecular Weight to Enable Additive Manufacturing of Performance Elastomers
Vehicle Radiator-grill Integration via Additive Manufacturing
Volumetric Sintering of a Selectively Doped, Functionally Graded Powder Bed
Weighing the Evidence: Origins and Mechanisms of Cellular Substructure in Additively Manufactured 316L
Wet-chemical Support Removal for Additive Manufactured Metal Parts
Wire-arc Additive Manufacturing: Invar Deposition Characterization
Wire Co-extrusion with Big Area Additive Manufacturing
X-ray Diffraction Stress Measurement and Comparison for Various Raster Path in Laser Powder Bed Fusion (LPBF)

Questions about ProgramMaster? Contact