3D Transient Thermal Modelling and Experimental Validation of the Temperature Distribution during Laser Heating of Ti6Al4V Alloy

A Study on Optimum Welding Conditions for Friction Stir Welded Aluminum Plates

A Technology of Twin Roll Casting and Differential Speed Rolling for Producing Magnesium Alloy Sheets

Aging Response of TB-13 Titanium Alloy

Alloy Design for Enhancing the Fracture Resistance of Heat Treated High Pressure Die-Castings

Aluminium-Rich Coring Structures in Mg-Al Alloys Inoculated by Carbon

Annealed Microstructure of Gum Metal Sheets after Cold Working

Assessing of Bendability of Aluminum Alloy Sheets for Autobodies

Assessment of Durability and Damage Tolerance of β-Annealed Ti-6Al-4V

Building Capability through Benchmarking and Technology Transfer

Characterisation of Cold Spray Titanium Coatings

Characterisation of Microstructures in Mg-Y-Zn Alloys

Characterization of the Mechanical Behaviour of Both Fusion Zone and Base Metal of Electron Beam Welded TA6V Titanium Alloy

Comparison of Mechanical Properties of Pure Mg Materials Obtained by Different Back Pressure Equal Channel Angular Processing Conditions

Composition Design of BCC Ti-Based Solid Solution Alloys Using a Cluster Structure Model

Crystallographic Orientation Dependence of Fatigue Crack Propagation in Rolled AZ31B Magnesium Alloy

Crystallographic Orientation Relationship between Discontinuous Precipitates and the Matrix in Commercial Mg Alloys

Deep Drawing of AM31 Magnesium Alloys

Deformation Behavior of Twin-Roll Cast Mg-4Zn-1Gd Alloy Sheet

Development of Heat-Resistance and Creep-Resistance Magnesium Alloy of Die-Casting Mg–4Al-4La and/or Ce

Development of High Strength Magnesium Alloys by Thermomechanical Treatment

Development of Magnesium Alloys and Their Processing Technologies for Large Size Profiles

Development of Microstructure and Texture in RE containing Magnesium Alloys during Hot Rolling

Development of New Magnesium Alloys with Consideration of Castability and Formability in IMR

Dispersoid Phases in 6xxx Series Aluminium Alloys

Drawability of Ti-6Al-4V Sheet at Elevated Temperatures

Durability of Aluminum Alloy/Rubber Joints in Corrosive Environment

Effect of Electromagnetic Field on Horizontal Direct Chill Casting of 7075 Aluminum Alloy

Effect of Loading Direction on the High-Cycle Fatigue Behavior of Rolled AZ31 Magnesium Alloy

Effect of Minor Additions of Al and Si on the Mechanical Properties of Cast Mg-3Sn-2Ca Alloys in Low Temperature Range

Effect of Pore Size on Mechanical Properties of Titanium Foams

Effect of Pre-Ageing on the Artificial Ageing Response of Al-Mg-Si(-Cu) Alloys

Effect of Volume Fraction of LPSO Phase on Mechanical Properties in Extruded Mg-Zn-Y Alloys

Effect of Zr Addition on Microstructure and Warm Formability of Al-Mg Sheet Alloys

Effects of Alloying Elements and Processing Conditions on Textures and Mechanical Properties of Magnesium Alloys

Effects of Impurity Elements on Green Strength of Titanium Powder Compacts

Effects of Trace Cu Addition on the Microstructure and Tensile Properties of ZK60 Alloy

Effects of Twin on Deformation Behavior of Magnesium Single Crystals

Evaluation of Sintering Properties with Al-14Si-2.5Cu-0.5Mg Powders

Experimental Investigation of the Dynamic Behavior of Aluminum Foams

Fabrication of High-Alloyed Magnesium Alloy Plate via Horizontal Continuous Casting Process

Fatigue Behavior of an Mg-Zn-Y-Zr Alloy in Vacuum at Room and Cryogenic Temperatures

Formation of a Novel X Phase in Mg–Gd–Zn–Zr Alloy

Grain Refinement by Combined ECAE/Extrusion and Dieless Drawing Processes for AZ31 Magnesium Alloy Tubes

Grain Refinement of Magnesiun Alloy AZ31 under Torsion Extrusion with a Square-Hole Die

High Resolution STEM Analysis of Metastable Phases in High Strength Al-Mg-Cu and Al-Zn-Mg-Cu Alloys

High Strength Non-Combustible Magnesium Alloys

Improved Properties of Boron-Modified Titanium Alloys

Improvement in Hot Workability of Titanium Matrix Composites by Thermohydrogen Treatment

Improvement of Corrosion Resistance of Extruded Mg-Zn-Y Mg/LPSO Two-Phase Alloys by Fourth Element Addition

In Line Rolling of Aluminum Alloy Strip Cast by a High Speed Twin Roll Caster

Influence of Grain Boundary on Activation of Slip Systems in Magnesium: Crystal Plasticity Analysis

Influence of Heat Treatment on the Pseudoelastic Behaviour of a β Ti-25Nb-3Zr-3Mo-2Sn Alloy

Influence of Solution Treatment on Microstructure and Quench Cracking in a Water-quenched Aluminium Alloy 7150

Inhomogeneous Deformation Behaviors and Their Effects on Mechanical Performance in a Warm-Extruded Magnesium Alloy with LPSO Phase

Inoculation during Metal Castings: Beyond Grain Refining

Joint Interface Morphology of Friction Stir Spot Welded Aluminum Alloy Sheets and Plated Steel Sheets

LCA Study of Rare Earth Metals for Magnesium Alloy Applications

Mechanical Properties of Oxide Dispersion Strengthened Pure Titanium Produced by Powder Metallurgy Method

Microstructural Characteristics of Electron Beam Processed Al-2Sc

Microstructural Evolution during Friction Stir Processing of Magnesium Alloy Castings: Observation and Modelling

Microstructural Evolution in Chips during Machining of Commercially Pure (Grade 2) Titanium

Microstructural Evolution in Various Regions of Stir Zone during Friction Stir Processing of Al-7Si-0.3Mg Cast Alloy

Microstructural Evolution of Rheo-Diecast AZ91D Magnesium Alloy with Gadolinium Addition

Microstructure and Corrosion Behavior in Al-Mg Based Alloys Subjected to Continuous Cyclic Bending and Annealing

Microstructure and Joint Strength of Similar and Dissimilar Lap Joints Fabricated by Several Advanced Solid-State Welding Methods

Microstructure and Mechanical Propeties of Extruded Mg-Zn-Ca Alloy

Microstructure and Texture Evolution of Twin-Roll Cast Magnesium Alloys during Thermo-Mechanical Treatments

Microstructure Evolution and the Interrelationship between Microstructure and Properties of Titanium Alloys

Microstructure of Laser Treated ZE41A-T5 Magnesium Alloy

Microstructures and High Temperature Mechanical Behavior of Mg-Al-Ca-Zn Alloys

Modelling of the Metal/Mould Interactions in the DC Casting Process for Aluminium and Magnesium

Modelling the High Temperature Deformation of Ti-6Al-4V

Multimodal Microstructure Evolution in Wrought Mg-Zn-Y Alloy with High Strength and Increased Ductility

Multiphase Light Alloys and Nanocomposites through Consolidation of Particles by Severe Plastic Deformation

Net Shape HIPping of Ti Alloys for Aeroengine Application

On the Influence of Vibration Frequency on the Solidification of AZ61 Magnesium Alloys during Electromagnetic Vibration

Phase Constitution and Heat Treatment Behavior of Ti-7mass% Mn-Al Alloys

Plastic Deformation Characteristics and Evaluation of Press Formability for Ti-6Al-4V Sheet at Warm Temperature

Precipitation Sequence in an Al-Si-Mg Foundry Alloy

Preparation Aluminum-Strontium Alloy by Molten Salt Electrolysis Method

Preparation and Mechanical Property of Mg-Zn-Y Alloy with a Long Period Ordered Phase

Production of Ti-6Al-4V Strip by Direct Rolling of Blended Elemental Powder

Progress of Research and Development on Titanium Alloys in China

Quantitative Analysis of Precipitate Compositions in an Al-Li-Mg-Cu Alloy Using Atom Probe Tomography

Recent Developments in Mechanisms and the Kinetics of Deformation Twinning in Titanium Alloys

Refinement of TiB2 in Al-Ti-B Grain Refiner Alloys by Ultrasound and the Effect on Al Grain Size

Roll Casting of Al-SiCp Strip

Sintering Characteristics of Pre-Alloyed Ti-6Al-4V

Solid State Recycling of Ti Machining Chips by Back Pressure Equal Channel Angular Pressing (BP-ECAP)

Solidification Structure and Sound Absorbability of A356 Alloy Foams

Solute Segregation at Σ11(113)[110] Grain Boundary and Effect of the Segregation on Grain Boundary Cohesion in Aluminum from First Principles

Sound Insulation Study on Mg Sheet and Mg Honeycomb Panels

Spark Plasma Sintering of Ti-4.5Al-3V-2Fe-2Mo (SP-700)

Structural Behavior of FRP Lighting Pole System

Structure, Energetics, and Mechanical Stability of Mg-Li bcc Alloys from Ab Initio Calculations

Study of Microstructure and Fracture Behaviour in Magnesium Alloy WE54 Subjected to Multiple-Stage Ageing Treatments

Study of Residual Stress Relief by Cryogenic Treatment in the Al 6061

Study of Thermal Behavior in a Kroll Reactor for the Optimization of Ti Sponge Production

Study on Mechanical Properties and Microstructures of Mg-5Zn-2Gd-0.6Zr New Sand-Casting Magnesium Alloy

Study on Quench-Induced Precipitation Behavior in an Al-7.5Zn-1.7Mg-1.4Cu-0.12Zr Alloy

Study on Tensile Property and Fracture of Welded Joint of Ti-6.5Al-2Zr-1Mo-1V Alloy by Hydrogen Processing

Surface Modification and Repair for Life Enhancement and Structural Restoration

TEM Observation of Metastable Phases in Aged Al-Mg-Ge Alloys

Temperature Dependence of Compressive Deformation Behavior of Mg89Zn4Y7 Extruded LPSO-Phase Alloys

Texture in Magnesium Alloys

The Ageing Behavior of Titanium Alloy Ti-10V-2Fe-3Al

The Effect of Cd Addition on NDE of As-Cast Mg-Cd Alloy in 0.1M NaCl Solution

The Effect of Temperature on Microstructure of a Metastable ß Ti Alloy

The Influence of Eutectic Morphology on the Impact Properties of High Pressure Die Cast Mg-Rare Earth Alloys

The Microstructure Characteristics and Wear Resistance of Rapidly Solidified Hypereutectic Al-Si Alloys

The Microstructure, Tensile Properties and Creep Behavior of Mg–Zn–Y–RE Alloys

The Role of Interfacial Precipitates on Creep Behaviour of Power Metallurgy (PM) Ti-48Al-2Cr-2Nb+1W Alloy

The Role of the Atmosphere and the Importance of the Formation of AlN on the Powder Processing of Aluminium

The Skin Effect in a Mg-Re High Pressure Die Cast Alloy

Thermal Stability and Effect of Texture on Ultrahigh Damping of Nanocrystalline Mg-Matrix Composites Reinforced with MAX Phases

Thermal Stability and Mechanical Properties of Mg-Zn-Y Alloys with Long-Period Stacking Order Phase

Thixomolded and Thermomechanically Processed Fine-Grained Mg Alloys

Twinning-induced Negative Strain Rate Sensitivity in Wrought Magnesium Alloy AZ31

Ultrasonic-assisted Fabrication of SiC Nanoparticles Reinforced Aluminum Matrix Composites

Understanding the Directional Dependence of Intergranular Corrosion in Aluminium Alloys

Varying Behavior of Shot Peened TC4-DT Titanium Alloy

Warm Hydroforming Process with Non-Uniform Heating for AZ31 Magnesium Alloy Tube

Welding Interface in Magnetic Pulse Welded Joints

Questions about ProgramMaster? Contact webmaster@programmaster.org