ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Mechanical and Creep Behavior of Advanced Materials: A SMD Symposium Honoring Prof. K. Linga Murty
Sponsorship TMS Structural Materials Division
TMS: Mechanical Behavior of Materials Committee
TMS: Nuclear Materials Committee
Organizer(s) Indrajit Charit, University of Idaho
Yuntian T. Zhu, North Carolina State University
Stuart A. Maloy, Los Alamos National Laboratory
Peter K. Liaw, University of Tennessee - Knoxville
Scope This symposium will celebrate the 75th birthday and life-long contributions of Professor K.L. Murty, and provide a forum to discuss the present status and recent advances in research areas in which he has made seminal contributions. These areas include:
• High temperature creep deformation of materials and micromechanistic interpretation;
• Prediction of mechanical behavior of HCP metals/alloys using crystallographic texture;
• Creep and fatigue behavior of microelectronic solders;
• Radiation tolerance of nanostructured materials;
• Development and application of ball indentation techniques as a non-destructive monitoring method of structural materials;
• Characterization of dynamical behavior of point and line defects using nuclear magnetic resonance techniques.
Abstracts Due 07/17/2016
Proceedings Plan Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)

A Rate Theoretic Approach to Modeling Irradiation Creep
Anisotropy and Creep Mechanisms during the Hot Forming of Light Alloy Sheet Materials
Application of Phase-field Approach in Deformation-induced Microstructure Evolution
Applying Conventional Creep Mechanisms to Ultrafine-grained Materials
Atomistic Simulation of Radiation Effects in FeCr-based Cladding
Compatibility of a Complex Concentrated Alloy with Non-aqueous Coolants
Correlating Variability in Fatigue Life with Fracture Mechanisms in a Near-α Titanium Alloy
Creep and Creep Fatigue of Alloy 709 Using In situ Heating during SEM and EBSD Observation
Creep Behavior of a Microstructurally Stable Nanocrystalline Alloy
Creep of Dispersion Strengthened Materials – Emergence of Paradigms Challenging the Old Theories
Creep of Zirconium and Zirconium Alloys
Creep, Deformation and Fracture Studies of Materials for Various Technologies in the Nuclear Materials Research Group at NC State
Cyclic Deformation Behavior of Modified 9Cr–1Mo Steel at Elevated Temperatures
Deformation and Fracture Behavior of Irradiated and Nonirradiated Austenitic Stainless Steels
Design of Creep-resistant Copper Alloys
Development of Creep-Resistant Austenitic Stainless Steels for High Temperature Applications
Digital Stress Imaging in Mesoscale Microstructure Dependent Deformation Visualized Using Nano-mechanical Raman Spectroscopy: Role of Initial Manufacturing Originated Residual Stresses
Dynamic Behavior of a Nanocrystalline Cu-Ta Alloy
Effect of Dynamic Strain Aging on Creep in Titanium Alloys
Effect of Mo and Bi Additions on the Microstructure of Zr-Cr-Fe Alloy after β-quenching
Effect of Thermo-mechanical History on the Creep Behavior of Sn-Ag-Cu Solders
Emulating Neutron Damage in Nanocrystalline Copper via In-situ Ion Irradiation
Enhanced Radiation Tolerance of Single Phase Solid Solution Alloys
Environmentally-benign Pb-free Solder Alloys: Complex Load Bearing Materials in Electronic Packaging
Fracture Behavior and Grain Boundary Sliding during High-temperature Low-stress Deformation of AZ31 Magnesium Alloy
Fundamental Discovery of Q-phases and Direct Conversion of Carbon into Diamond and h-BN into c-BN
Fundamentals of Creep in Aluminum Over a Very Wide Temperature Range
Helium Hardening in Interface-dominated Metallic Composites
High Temperature Behavior of Zirconium Alloys in Air
In-situ TEM Observation of the Peculiar Movement of Dislocations in Mg
In Situ Neutron Diffraction Studies of Crystallographic Texture at Stress and Temperature with Implications for Training Shape Memory Alloys
Increasing the Elevated-temperature Strength of a Beta Titanium Alloy through Thermomechanically-induced Phase Transformation
Indentation Probes for Measurements of Localized Materials Properties
Influence of Fine Scale Alpha Precipitation on the Mechanical Properties of the Beta Titanium Alloy Beta-21S
Irradiation Creep of Zr-Alloys
L-114: Effects of Blade Curvature on Fatigue Life of Nickel-based Single Crystal Structures with Film-cooling Holes
L-115: Understanding of Microstructure and Mechanical Properties of Friction Stir Processed Aluminum-bearing High-Chromium Ferritic Stainless Steel
L-116: In Situ Investigation on the Micromechanical Behavior of the CuZr-based BMGC by Neutron Diffraction
L-117: Mechanical and Creep Behavior of EPDM
L-118: High Temperature Tensile Properties and Related Microstructural Evolution of Grade 92 Steel
L-119: Mechanical Properties and Serrated Flow in Al-bearing, High-Cr Accident-tolerant Ferritic Steel
L-120: Spherical Nanoindentation Creep Behavior of Indium at Room Temperature
Mechanical and Microstructural Effects of Thermal Aging on Cast Duplex Stainless Steels by Experiment and Finite Element Method
Mechanisms Governing the Creep Behavior of High Temperature Alloys for Generation IV Nuclear Energy Applications
Microstructure-property Interrelationships in Metastable Beta Titanium Alloys with Refined Distributions of the Alpha Phase
Microstructure, Texture and Mechanical Properties of the 14YWT Nanostructured Ferritic Alloy NFA-1
Modelling of the Fracture of Precipitate and Austenitic Matrix Interfaces During Creep
Molecular Dynamics Simulations of Dislocation – Obstacle Interactions
Multiaxial Creep and Creep-fatigue
On Dislocation Patterning in Deformed Crystals
On the Creep Behavior of Dual-Scale Particle Strengthened Nickel Based Alloy
On the Origin of the Sink Efficiency of Grain Boundaries under Irradiation
Precipitate-dislocation Interaction Mediated Portevin-Le Chatelier-like Effect in a Beta-stabilized Ti-Mo-Nb-Al Alloy
Radiation Response of Nanotwinned Metals
Role of Structural Defects on the Magnetostriction of α-phase of Fe-based Alloys
Spherical Nanoindentation Stress-strain Curves
Structure-property Correlations in Metallic Components Synthesized Using Selective Laser Melting
Structure-property Relationships in Steel Fibers
Study of Accelerated Creep Behaviour of Zr-2.5Nb Pressure Tubes
Study of High Temperature Deformation Behavior of Graded Transition Joints (GTJs) (Relevance to Nuclear Power Plant Components)
Surface Finish Effects on Fracture Behavior of Sn-4Ag-0.5Cu Solder Joints
Synergistic Effects of Neutron Irradiation and Interstitial Nitrogen on Strain Aging in Ferritic Steels
TerraPower HT9 Mechanical and Thermal Creep Properties
The Creep-resistant High Entropy Alloys (HEAs)
The Enhanced Radiation-resistance of Ultrafine-grained Metals Produced by SPD Processing
The Microstructural Evolution of Hot Deformed Ti-IF Steel
The Representation of Grain Boundary Texture Using Hyperspherical Harmonics
The Wigner Energy Spectral Fingerprints of Radiation Damage

Questions about ProgramMaster? Contact