ProgramMaster Logo
Conference Tools for 2019 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2019 TMS Annual Meeting & Exhibition
Symposium Aluminum Alloys, Processing and Characterization
Sponsorship TMS Light Metals Division
TMS: Aluminum Committee
Organizer(s) Hiromi Nagaumi, Soochow University
Scope This Aluminum Alloys, Processing and Characterization Symposium, along with Cast Shop Technology, Aluminum Reduction Technology, Electrode Technology for Aluminum Production, and Alumina and Bauxite form the Light Metals Symposium. This is an excellent opportunity to interact with experts from the Light Metals industry and academia from all over the world and get the latest update on key issues in the industry. The symposium covers all aspects of the physical and mechanical metallurgy of aluminum alloys as well as processing methods, product development, testing, and implementation of aluminum for end applications, including transportation (automotive, aerospace, and marine), packaging, and other key product segments. You are invited to submit papers of fundamental and applied research in the following subject areas:

- Alloy Development
- Process Innovation
- Microstructure Evolution and Characterization
- Mechanical Behavior
- Failure Analysis
- Material Modeling and Simulation
- Machine Design
- Process Control
- Measurement Technology
- Process Modeling
- Heat Transfer
- Surface Generation
- Defect Measurement and Control
Abstracts Due 07/16/2018
Proceedings Plan Planned: Light Metals

3-D Microstructural Distribution and Mechanical Analysis of HPDC Hypereutectic Al-Si Alloys via X-ray Tomography
Advanced Characterization of the Cyclic Deformation and Damage Behavior in Al-Si-Mg Cast Alloys using Hysteresis Analysis and Alternating Current Potential Drop Method
Clustering Behavior of Al-Mg-Si Alloys with Ag and Cu Addition during Natural and Artificial Aging
Comparative Electrochemical and Intergranular Corrosion-resistance Testing of Wrought Aluminium Alloys
Comparison of Diversified Casting Methods on Mechanical and Microstructural Properties of 5754 Aluminum Alloy for Automotive Applications
Comparison of the Effects of B4C and SiC Reinforcement in Al-Si Matrix Alloys Produced via PM Method
Conditions for Retrogression Forming Aluminum AA7075-T6 Sheet
Coupled Fluid Flow and Heat Transfer Analysis of Ageing Heat Furnace
D-39: Development of High Thermal Conductivity Aluminum Alloys for the Integrated Plastic / Metal Molding (IMKS)
D-40: Effect of Alloying Elements on the Thermal Conductivity and Other Properties of Aluminum Alloys Developed as Casting Alloys
D-41: Effect of Cu Addition on the Microstructure, Mechanical and Thermal Properties of an Al-Si Piston Alloy
D-43: Effect of Rare Earth Metals on Microstructure and Mechanical Properties of Aluminum alloys Processed by Extrusion
D-44: Effects of Alloying Elements on Mechanical and Thermal Characteristics in Al-Si-Mg-(Cu) Foundry Alloys for Automotive Engine Components
D-45: Effects of Sc and Zr Addition on Microstructure and Mechanical Properties of Al-3Cu-2Li Alloy
D-46: Effects of the Strontium Addition on Microstructure Mechanical Properties of Sand Casting A356 Alloy during Solution Treatment
D-47: Effects on Microstructure Evolution of Al-9Si-0.3Mg Alloy by Pyrometallurgically Produced Sr Master Alloy
D-48: High Strength and Corrosion Resistant Al Alloys at High Temperature
D-49: Improvement of the Mechanical Properties of the Aluminum Alloy 7075 by ARB
D-50: Investigation of the Microstructure and Mechanical Properties of Cast AA7068 Hybrid Nanocomposite Reinforced with GNPs and SiC
D-51: Microstructure Characterization and Properties of Cast Al-Si-Fe-Zn Alloys with High Thermal Conductivity
D-52: Modification of A7075 Alloy for Improved Extrudability
D-53: Relationship between Si Content and Activation Energy of Si Precipitation in Al-Si Alloys
D-54: Strengthening Behaviour of Al-Si Alloy Containing Oxygen Atoms
D-55: Study on Microstructure and Mechanical Properties of Al-Zn-Cu Based Alloys with Additive Elements using Extrusion
D-56: The Effect of Ag on the Microstructures and Properties of Al-Mg Alloys
D-57: Effect of Multi-pass Friction Stir Welding on the Microstructure, Mechanical and Wear Properties of AA6061/CNTs Nanocomposites
D-59: Evaluation of β-phase Formation in 5xxx Aluminum Alloys
D-60: Examination of Formability Properties of 6xxx Alloy Extruded Profiles for the Automotive Industry
D-61: Improvements for The Recognitionn Rate of Surface Defects of Aluminum Strips
D-62: Influence of CNTs Nanoparticles Incorporation to Friction Stir Welded 6061Aluminum Alloy on the Microstructure and Shear Punch Properties
D-63: Investigation of Mechanical Properties for 7075 Aluminum Alloy using Friction Stir Welding (FSW) Reinforced with CNTs
D-64: Mechanical Characterization of Cold Sprayed Aluminum Alloy Powders Using In Situ Micropillar Compression and Tension
D-65: Microstructure and Surface Finish Evolution During Incremental Sheet Forming of AA 7075
D-66: Microstructures and Mechanical Properties of Low Si Content Al-Si-Mg Alloy
D-67: Primary Si Refinement in Hyper-eutectic Al-Si Alloys Using Metal-oxide Particles
D-68: Production of Commercially Pure Aluminum Electrical Conductor Strips via a Single-step, Machining-based Technique
D-69: The Effects of T6 Heat Treatment and Extrusion Process on the Microstructure and Wear Behavior of Al7068 Aluminum Matrix Hybrid Nanocomposites Reinforced with GNPs and SiC Nanoparticles
D-70: The Preparation Methods and Application of Aluminum Foam
D-71: The Role of In Situ Stacking Faults in the Deformation Mechanism of I-Al
D-72: Through-thickness Strain Gradient in a Hot Rolled Al-Mg Alloy Obtained by Nanoindentation and Glancing Angle X-ray Diffraction
Determination of the Intermetallic α-Phase Crystal Structure in Aluminum Alloys Solidified at Rapid Cooling Rates
Die-casting and Recyclability of LREE Aluminum-Cerium Alloys
Effect of Mg and Si Content in Aluminum Alloys on Friction Surfacing Processing Behavior
Effects of Zr Additions on Structure and Microhardness Evolution of Eutectic Al-6Ni Alloy
Elevated-temperature Low Cycle Fatigue Behaviors of Al-Si 356 and 319 Foundry Alloys
Fabrication and Characterization of Open Cell Aluminum Foams by Polymer Replication Method
High Conductivity AlSi7Mg (A356) Alloys – Market, Production, Optimization and Development
Impact of the Main Casting Process Parameters on Floating Crystals in Al Alloys DC-Cast Ingots
Influence of Die Soldering on Die Erosion and Soldering Layer between Al Melts and Die in Al-Si-Fe Alloys
Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy
Mechanical Properties Evolution for 8xxx Foil Stock Materials by Alloy Optimization-literature Review and Experimental Research
Microstructure and Mechanical Properties of an Al-Zr-Er High Temperature Alloy Microalloyed with Tungsten
Multi-component High Pressure Die Casting (M-HPDC): Temperature Influence on the Bond Strength of Metal-plastic-hybrids Manufactured by M-HPDC
Nature of Grain Boundary Precipitates and Stress Corrosion Behavior in Al 7075 and 7079 Alloys
Numerical Modelling, Microstructural Evolution and Characterization of Laser Cladded Al-Si-Sn Coatings on Ti-6Al-4V Alloy.
On Microstructures, Textures and Formability of AA6xxx Alloy Sheets from DC and CC Processing
Production of the AA2196-TiB2 MMCs via PM Technology
Prototyping of a High Pressure Die Cast Al-Si Alloy Using Plaster Mold Casting to Replicate Corresponding Mechanical Properties
Reduction of Aluminium Ingot Cooling Time in DC Casting Process
Residual Stress Characterization for Marine Gear Cases in As-cast and T5 Heat Treated Conditions with Application of Neutron Diffraction
Retrogression-reaging Behavior in Aluminum AA6013-T6 Sheet
Study on Tensile Behavior of High Vacuum Die-cast AlSiMgMn Alloys
The Effect of High Speed Direct Chill Casting on Microstructure and Mechanical Properties of Al-Mg-Si-Fe Alloy
The Effect of Manganese and Strontium on Iron Intermetallics in Recycled Al-7% Si Alloy
The Effects Manganese (Mn) Addition and Laser Parameters on the Microstructure and Surface Properties of Laser Deposited Aluminium Based Coatings
The Effects of Solidification Cooling Rates on the Mechanical Properties of an Aluminum Inline-6 Engine Block
The Influence of Quenching and Stretching Process Conditions of Aluminium Alloy Plates on Residual Stresses
The Influence of the Distance Between the Plate and the Top Nozzles during the Soft Quenching Process of the 6061 Aluminium Alloy Plates
Understanding the Role of Cu and Clustering on Strain Hardening and Strain Rate Sensitivity of Al-Mg-Si-Cu Alloys

Questions about ProgramMaster? Contact