A Compatibility Evaluation for Application of Lean Duplex Stainless Steels to Seawater Systems of Nuclear Power Plants

A Systematic Study on Iron Carbides from First-Principles

Advanced Steel Design by Multiscale Modeling

Aluminide Coating Formation on Hot Press Forming Steels

Analysis of Advanced Strip Shape during Cold Rolling of Thin Strip

Analysis of Edge Crack of Thin Strip during Cold Rolling

Application of Quenching and Partitioning to Improve the Ductility of Ultra High Strength Low Alloy Steel

Characterization of Microstructure and Mechanical Properties of a Nb-Microalloyed Steel after Quenching-Partitioning-Tempering Process

Characterization of Substructure Evolution in Ferrous Lenticular Martensite

Cold Rolling and Annealing Microstructures and Textures of Low Carbon Steels

Constitutive Modeling of TWIP Steel in Uni-Axial Tension

Continuous Casting of Advanced Steels of near-Peritectic Composition

Correlation between Deformed Austenite Grains and Subsequent Transformed Microstructure in X80 Linepipe Steel

Crystallography of Ferrite Nucleation at Austenite Grain Boundary in Low Carbon Steels

Deformation Behavior of Austenite-Base High Mn Steels

Deformation Behavior of Ferrite-Base Lightweight Fe-Mn-Al-C Steel

Design and Characterization of Fe-Cr-Mn High-Interstitial-Alloyed Austenitic Stainless Steels

Development of a Robust TRIP800 Concept for GI/GA Automotive Applications

Development of Steel Plate for One Kind of Heavy-Duty Truck Carriage and Its Structure Optimization

Development of Thin Cold-Rolled Sheet with High Strength and Good Formability

Ductile-to-Brittle Transition Behavior of High-Nitrogen 18Cr-10Mn-0.35N Austenitic Steels Containing Ni and Cu

Effect of Aging on the Microstructure and Tensile Properties of Lightweight Fe-Mn-Al-C Steel

Effect of Alloy Addition on Hydrogen Degradation Behavior of 18Mn-0.6C Steels

Effect of Aluminum Content on the Microstructure and Mechanical Properties of Hypereutectoid Steels

Effect of Austenite Grain Refinement on the Deformation Induced Martensitic Transformation and High Cycle Fatigue Properties in Fe-17Mn Alloy

Effect of Austenite on Drawing Limit of Ferrite-Austenite Dual Phase Steel Wire

Effect of Cr Contents on Microstructural and Hardness in the Resistance Spot Welded of Dual Phase Steel for Automotive Body Applications

Effect of Grain Size on Formability of SUS 304 Stainless Microtube Press Bending Process

Effect of Heat Treatment on Microstructure and Mechanical Properties of Low-Carbon TRIP Steel Tube

Effect of Hot-Rolled Processing on Microstructures in Nb Microalloying Dual-Phase Steels

Effect of N on the Microstructure and Tensile Behavior of TWIP Steel

Effect of Nb Content on Hot Flow Stress, Dynamic Recrystallization and Strain Accumulation Behaviors in Low Carbon Bainitic Steel

Effect of Niobium Content on Laminar Precipitate and High Temperature Mechanical Properties of 21-2N Valve Steel

Effects of Carbide on Hydrogen Delayed-Fracture for 1GPa Tensile Strength Steel Wire

Effects of Chemical Compositions and Processing Conditions for Development of High Manganese TWIP Steel with 980MPa Tensile Strength

Enhanced Hot-Dip Gavalizability of 590 TRIP Steel Using Oxidation-Reduction Scheme

Evaluation of Formability with Servo Die Cushion in Deep Drawing

Evidence of Lath Martensite in High-C Japanese Sword Produced from Tamahagane Steel by Tatara Process

Evolution of Different Recrystallization Textures in Steels Having {111}<112> Rolling Texture

Evolution of Inclusions in High Mn-Al Alloyed Steels at 1873 K

Experimental and Numerical Investigations on Springback Variation in Stamping of Advanced High Strength Steels (AHSS)

Fundamental Studies on Hydrogen Dissolution in Welding Type Molten Fluxes

Grain Boundary/Interfacial Energy Database Bridging Atomic Scale and Mesoscale Steel Properties

Hardness Characteristics and Carbon Equivalent Equation of Resistance Spot Beam Welded Advanced High Strength DP Steels

High Velocity Compaction of 316L Stainless Powder

Hot Deformation Behavior of V-microalloyed Steel

Hot Ductility of a High Carbon Steel Produced by CSP

Improving Machinability of Plane Carbon Free Cutting Steels

In-Situ TEM and APT Analysis on the Dislocations Associated with Solute Carbons in Strain-Aged Low Carbon Linepipe Steels

In Situ Observation of Microstructure Evolution in Low Carbon Bainite Steels Isothermally Held below A1 Temperature

Influence of Cu Contents in Hot Shortness of Cu Bearing EAF Steels

Influence of Initial Microstructure on Mechanical Properties of Cu Bearing Extra Low Carbon Steel Sheets

Influence of Phosphorous and Boron on Recrystallization, Grain Growth and Mechanical Properties of 3% Si Steel

Influence of Silicon on the Spheroidization of Cementite in Hypereutectoid Bearing Steels

Influence of Strain Path Changes on Microstructure Inhomogeneity and Mechanical Behaviour of Wire Drawing Products

Influence of Thermal History on Microstructure and Mechanical Properties of Steels for Hot Stamping

Influences of Welding Parameters and Heat Treatment on Microstructure and Tensile Properties of Welded Joints of Ni-Base Superalloy

Interfacial Properties Prediction of Liquid Iron- Si Inclusion- MgO Refractory

Investigation of Experiment and Theory on Precipitation Transition Behaviors in Reduced Activation Steels

Isothermal Martensitic Transformation in a Sensitized SUS304 Stainless Steel under Magnetic Field

Mechanical Properties of Micro-Alloyed TRIP Steel

Mechanism and Kinetics of the Peritectic Phase Transition Relevant to High-Speed Continuous Casting of Steel

Mechanism of Leaching of Calcium Ion (Ca2+) from Commercial Calcium Silicate; Its Implementation to Blast Furnace Slag

Microstructural Evolution Analysis of Medium Carbon Steels during the Quenching and Partitioning Process

Microstructural Evolution during the Novel Quenching and Partitioning (Q&P) Heat Treatment of Steel

Microstructures and Tensile Properties of Annealed Medium Mn TRIP Steels

Mold Thermocouple Locations and Their Impact on Prevention of Caster Breakouts

Multiresolution Continuum Mechanics for Fracture Process

Multiscale Systems Design of Advanced Steels

Nano-Scale Analysis of Nano-Bainite Formed in Advanced High Strength Steels

New Insights into Intragranular Ferrite in Low-Carbon Low-Alloy Steels

New Pearlitic Transformation in an Ultrafine Grained High Carbon Steel

New Type Bainitic Steel for Grade R5 High Performance Offshore Mooring Chain

Nitriding of a Nb-Microalloyed Thin Cast Strip Steel at 525 Degrees

Nucleation of Bainite on Allotriomorphic Ferrite/Austenite Interface in a Low Carbon Steel

On the Performance Improvement of Steels through M3 Structure Control

On the Stretch-Flangeability of High Mn TWIP Steels

Phase Transformation and Annealing Behavior of SUS 304 Austenitic Steel Deformed by High Pressure Torsion

Preliminary Investigation into Repair of High Strength Steel Using Laser Cladding

Process Window Study for Heat Resistant Nanocoated Steel

Quantum Engineering of Interfaces in Steels

Radiation Tolerant Nanostructured Ferritic Alloys

Recent Product Developments with Ultra-Thin Cast Strip Products Produced by the CASTRIP® Process

Relationship between Particle Size and Martensitic Transformation in Fe-30at%Ni Alloy

Research and Production Practice of DR Material in Baosteel

Research on Multi-Plate Rolling Technology of Plate Mill

Review on the Hall-Petch Relation in Ferritic Steel

Room Temperature Tensile Defromation of High Mn-Al-C Steels

Scale-Bridging Analysis of Stress Partitioning in High Nitorgen Steel

Selective Oxidation and Sub-Surface Phase Transformation during Austenitic Annealing of TWIP Steels

Smelting Technology and Final Product Quality of Steel Rails Used for Passenger Special Line with 350 km/h

Strain Rate Dependence of TRIP Behaviour and Deformation Structure in Metastable Austenitic Stainless Steel

Stress Dependence of Microstructural Evolution in Heat Resistant Steels during Creep

Study of a Novel Ultra-High Strength Steel with Adequate Ductility and Toughness by Quenching–Partitioning–Tempering Process

Study on New Model of Tension Process in Continuous Rolling

Study on Selective Oxidation of TRIP Steels Containing Si, Mn, and B

Study on the Production of Ti Microalloyed High Strength Hot Rolled Steel by CSP Process

Tensile Deformation Behavior of Tempered Martensitic Steel Produced in CGL Lines

Test of the SHTT Method to Simulate the Crystallization of Inclusions in Semi-Killed Steels during Heat Treatment Prior to Hot Rolling

The Effect of Inclusions on Mechanical Behaviour in Ultra-High Strength Alloy Steels

The Effect of Mn and Si on the Properties of Advanced High Strength Steels Processed by Quenching and Partitioning

The Effects of Holding Time at the Intercritical Temperature on the Mechanical Properties of a Dual Phase Steel

The Effects of the Ultrasonic Treatment on Degassing Rates in RH Water Model System

The Isothermal Transformation of Low-Alloyed Low-C CMnSi Steels below MS

The Oxide Inclusion and Heat-Affected Zone Toughness of Low Carbon Steels

The Role of Epsilon Martensite on the Hydrogen Degradation Behavior of High Mn Steels

The Sheet Formability of Superbainitic TRIP Steel

The Study on the Precipitation and Mechanical Properties of Bainitic Steels

The Technology of Minimize the Surface Cracks of AHSS Steels in Kwangyang Works

Thermodynamics of Carbon and Silicon in Manganese Alloy Melts

Topology of Spheroidized Pearlite

Ultra Fine-Grained 6wt% Manganese TRIP Steel

Ultrafine Grained High Strength Low Alloy Steel with High Strength and High Ductility

Welding Technology of Ultra-Low Carbon and Nitrogen Ferrite Stainless Steel

Questions about ProgramMaster? Contact webmaster@programmaster.org