ProgramMaster Logo
Conference Tools for Materials Science & Technology 2017
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting Materials Science & Technology 2017
Symposium Advanced Steel Metallurgy: Products and Processing
Organizer(s) Emmanuel De Moor, Colorado School of Mines
Amar K De, ArcelorMittal Global R&D
Kester Clarke, Colorado School of Mines
Alla V. Sergueeva, The NanoSteel Company
Charles M. Enloe, General Motors
Daniel James Branagan, The NanoSteel Company
Matthew Thomas Kiser, Caterpillar Inc
Scope This Symposium will focus on recent achievements in advanced steel development, innovations in steel production and post-processing and perspectives for steel application including lightweighting strategies for next generation vehicle design. In the last decade, the steel industry has been making a sustained effort to innovate and create advanced steels and production methods to fulfill the needs of modern technological progress for materials with continuously growing demand for property enhancement. There is a number of existing strategies that are being pursued towards this goal such as development of Advanced High Strength Steels (AHSS) including types such as dual phase (DP) complex phase (CP), transformation induced plasticity (TRIP), twinning induced plasticity (TWIP), as well as implementation of new processing routes, including quenching and partitioning (Q&P) and ultra-rapid heating and cooling. Microstructural refinement to the nanoscale level is also one of the most promising new pathways towards steels with unique and compelling property combinations. In addition to existing and emerging strategies for microstructural and metallurgical design (including alloying and processing, microstructural design, microstructure/processing/property correlation), this Symposium will also include recent developments in steel characterization methods, simulations, and modeling of metallurgical phenomena. Sheet, plate, long products, and finished components will all be addressed. Its goal is to educate, inform, and accelerate the development and acceptance of new concepts and methodologies in steel design, development, and implementation enabled through novel routes toward steel processing, production, microstructural characterization, and testing.
Proposed theme areas include but not limited to:
- Emerging technologies, challenges, and opportunities for AHSS
- Liquid and solid steel product metallurgy
- Advanced steel characterization methods
- Simulations and modeling of metallurgical phenomena and technological processing
- Novel property combinations in existing and emerging classes of AHSS steel
- Advanced steels targeted for lightweighting applications in next generation vehicle design
- Innovations in steel products and applications
Abstracts Due 03/31/2017
Proceedings Plan Definite: At-meeting proceedings

3rd Generation AHSS: High Strain Rate Tensile Testing
A Medium-carbon, Bainitic, Air-hardening Steel for Heat Treat Reduction
A Novel Gradient Rolling Technique for Heavy/Ultra Heavy Steel Plate with High Strength
Advanced Materials for Oil and Gas Applications - Performance and Degradation
Alloy Design and Heat Treatment of High Strength Forged Steel for Large Crankshaft
An Integrated Computational Approach for the Development of Automotive Steels
Architecturing TWIP Steels for Energy Absorption and Lightweighting
Austenite Growth and Retention Simulations in Intercritically Annealed Medium Manganese Steels
Characterization of Inclusions during Calcium Treatment
Characterization of Inclusions in Slab of Grain-oriented Silicon Steel
Characterizing High Mn TRIPLEX Steels for Thick Plate Applications
Chemical Composition and Cooling Rate Effect on Microstructure Evolution in AHSS Grades
Comparison of Zinc Corrosion Resistance between Carbon Brick and Carbon Composite Brick in Blast Furnace
Control of Non-metallic Inclusions in High Quality Saw Wires
Correlation of Microstructure and Mechanical Properties in Welded Joints of 12MnNiVR Pressure Vessel Steel Subjected to High Heat Input Electrogas Welding
Crystallogaphic Effects on Mechanical Stability of Retained Austenite in a Medium Carbon TRIP Steel
Deformation Twinning Mechanisms of TWIP Steel Revealed by In-situ Transmission Electron Microscopy
Design of Tougth Nanostructured Bainitic Steels
Designing Healable Steels with Excellent Reusability
Development of Compacted Vermicular Cast Iron Cylinder Liner for Large Bore Marine Diesel Engine
Development of Mechanistic Long-term Creep Models for P91 Steels
Development of New Pretreatment Process with BOF in East Japan Works (Keihin), JFE Steel
Development of Steel Suitable for Two-side Enameling
Distribution of Non-metallic Inclusions along the Thickness of Q345D/E Steel Slab
Double Slag Modification Method for Reducing Slag Oxidation of IF Steel
Dry Granulation of FeSi Alloy by Rotary Multi-nozzles Cup Atomizer
Effect of Austenite Transformation on the Hole Expansion Properties of Q&P and Medium Mn Steels
Effect of Feeding Amount of Calcium on Non-metallic Inclusions of X80 Pipeline Steel
Effect of Hood Pressure on Nitrogen Pick-up in the LD Steel Making Process
Effect of Intercritical Deformation on Final Microstructure in Low Carbon Grades
Effect of Scale Formation on Copper Enrichment in Continuously Cast Slab
Effect of TMCP Steel Microalloying on Weld Metal Toughness
Effects of Martempering on the Strength and Toughness of Medium Carbon Stainless Steels
Estimation of Slag in Ferrochrome
Evolution Behavior and Refinement Mechanism of Inclusion by Magnesium Treatment in Al-killed Steel
Experimental Investigation on Inclusions in Hot Rolled Axel Steel by the Mold Casting
Experimental Study on MnS Precipitation in Continuously Cast Bloom of High Speed Railway
Flash® Bainite:  Cold Stamping 1500 to 1800MPa Structural and Energy Absorbing Components to <2T Bend Radii
Heat Transfer during Bottom Jet Impingement Cooling of a Stationary Steel Plate
High Temperature Tempering Behavior of Martensite during AHSS Manufacturing
Hydrogen Trapping Behavior in a Strained Ferritic-martensitic Dual Phase Steel
Improvement of Titanium Yield in High Carbon Silicon Killed Steel Injecting Wire Highly Compacted Ferrotitanium
Improving Burnt Edge Defects in Boron-alloyed Steel
Increasing the Lifetime of Large Forging Dies by Repairwelding
Influence of Cooling Rates on Phase Transformation and Precipitation Behavior in High Ti Microalloyed Steel
Investigation on the Impurity Absorptivity of Tundish Fluxes
Liquid Metal Embrittlement of Resistance Spot Welded 1180TRIP Steel - Effects of Crack Geometry on Weld Mechanical Performance
Mechanical and Microstructural Characterization of Spiral Sub-merged Arc Welded X-80 Line Pipes
Mechanical Stability of Retained Austenite in Austempered Fe-Mn-Si Medium Carbon Steel
Microstructural Evolution and Mechanical Properties of a Prototype 0.2C-6Mn-1Si-1Al Third Generation Steel
Microstructure and Mechanical Behavior of a TWIP Fe-15Mn-2.5Si-2Al Steel
Microstructure and Tensile Properties of Medium Mn Two-Stage TRIP Steels
Migration Behavior of Inclusions in Molten Steel under the Treatment of Electric Current Pulse
Modeling of the Agglomeration of Al2O3 Inclusions in Molten Steel
Modification of Inclusions in Q345D Steel
Nano-sized Carbide Precipitates in High-strength Low-alloy Steels
New FCAW Electrodes for Producing Ultra-clean Welds in High Strength Low Alloy Steel
New Generation Structural Steel Metallurgy
New Method of Slab Corner Transverse Cracks Control for Micro-alloyed Steels Continuous Casting
Non Equilibrium Thermodynamics of Quench and Partition Steels
Nucleation of Graphite Particles Formed in Medium Carbon Steel after Graphitising Anneal
Numerical Analysis on Effect of Additional Gas Injection on Characteristics around Raceway in Melter Gasifier
Numerical Study of Nail Board Experiments to Determine the Characteristics of the Surface in the CC Mold
Numerical Study of Steel Flow and Inclusion Removal during RH Degassing Process
Prediction of Precipitation Strengthening of κ-carbide in Austenite-based Low-density Steel
Relationship of Grain Size and Deformation Mechanism to the Fracture Behavior in High Strength–high Ductility Nanostructured Austenitic Stainless Steel
Research of CO2-O2 Mixed Injection Steelmaking in 300t Converter
Semi-molten State Reduction Behavior of Panzhihua Ilmenite Concentrate with Additive
Significant Influence of Carbon and Niobium on the Precipitation Behavior and Microstructural Evolution and Their Consequent Impact on Mechanical Properties in Microalloyed Steels
Simulation and Application of the Coherent Oxygen Supplying Technology with Low Calorific Value Fuel Gas in EAF Steelmaking Process
Simulations and Modeling of Metallurgical Phenomena Produced on Pressing in SHS-conditions
Structure - Mechanical Property Relationship in Laser Welded T-250 Maraging Steel Joint
Structures and Mechanisms Enabling Cold Formability In NanoSteel 3rd Generation AHSS
Study on Modification of Inclusions in Aluminum Deoxidized Steel by Carbonate
Study on Plastic Control of Inclusion in Cord Steel
Study on the Effect of UPC on Coke Gasification Reaction in Blast Furnace
Study on the Reducing Reaction characteristics of the Iron Oxide Briquettes under H2 and CO Mixtures
Tailoring Comprehensive Properties of High Nitrogen Stainless Steel via Friction Stir Processing
Temperature and Strain Rate Effects on Tensile Deformation Behavior of a Medium Mn TRIP Steel
Tempering Response of Bainitic Microstructures
The Effect of Microstructure on the Properties of Ultra High-carbon Steel Produced by Mechanical Alloying and Spark Plasma Sintering
The Effect of Vanadium and Other Microalloying Elements on the Microstructure of Bainitic HSLA-type Steels
The Effects of Ausaging Heat Treatment on Mechanical Properties of a Medium Carbon Secondary Hardening Steel
The Effects of Cr and Ni Contents and Heat Treatment on Mechanical Properties of a Medium Carbon Secondary Hardening Steel
The Effects of Heating Rates on the Tempering of 4140 Steel
The Effects of Milling Energy and Carbon Concentration on the Microstructural Evolution of Ultra High-carbon Fe-C Alloys
The Impact of Aluminum on the Microstructure and Deformation Behavior in Medium-Mn TRIP Steels
The Influence Factors about Exacting Thickness Tolerance of Cold Rolled Strength Steel in Hot Rolling
The Influence of Chemistry and Process Parameters on the Microstructure and Mechanical Property of DP78
The Role of Microstructure in Damage Development of 1st and 3rd Generation AHSS during Air Bending
The Simulation to Micro-inclusions Removing in RH Refining Process
The Temperature Measurement and Simulation Analysis for Mold Cu-tube of High Speed Billet Caster
Understanding Loss of High Strength Steel during Tempering: A Process of Recovery

Questions about ProgramMaster? Contact