ProgramMaster Logo
Conference Tools for 2014 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2014 TMS Annual Meeting & Exhibition
Symposium Aluminum Processing
Sponsorship TMS Light Metals Division
TMS: Aluminum Committee
Organizer(s) Kai F. Karhausen, Hydro Aluminium Rolled Products GmbH
Scope This symposium is part of the Light Metals Symposium and covers all processing methods applied to solid aluminum as well as the resulting process specific product properties. Especially the main processing routes in the Aluminum industry are addressed, i.e. hot- and cold rolling, strip casting, extrusion, forging, drawing, etc.. This session will cover innovative research work and advances in ongoing research as well as industrial practices and advances in aluminum downstream processing technology. Authors are invited to submit papers including (but not limited to) the areas of machine design, process control, production scheduling, measurement technology, microstructure evolution and characterization, process modeling, material modeling, tribology, heat transfer, surface generation, defect measurement and control. It is intended to run dedicated sessions for the specific processes.
Abstracts Due 07/15/2013
Proceedings Plan Planned: Light Metals Volume
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

A Numerical and Experimental Study of Homogenization of Al-Si-Mg Alloys
A Study of the Effects of Homogenization Scenarios and Extrusion Conditions on Recrystallization Mechanisms via Analysis of Texture and Microstructure Evolution in AA3003 Alloy
AL-Ceramic Composites Liquid Metal Mixed, History: Hot Work Microstructures, Failures, Constitutive, Extrusion Modeling
Analysis of Interdendritic Strain during Dendritic Solidification in Twin-roll Strip Casting of Aluminum Alloys
Analysis of the Evolution and Deformation of Pore Morphology during Compression
Comparison of Texture Prediction in Cold Rolling of Aluminum with VPSC, CP-FEM and GIA
Determination of Aluminum Rolling Oil and Machinery Oil Residues on Aluminum Sheet and Foil by Using Elemental Analysis and Fourier Transform Infrared Spectroscopy Coupled with Multivariate Calibration
Development of Extremely Thin Wall Aluminum Fin Tube by Hot Extrusion
Dynamic Simulation of Internal Logistics in Aluminum Downstream Manufacturing
Effect of Mg2Si Phase on Extrusion of AA6005 Aluminum Alloy
Evolution of Microstructure and Texture during Severe Cold Rolling and Annealing of Al-2.5%Mg and Al-2.5%Mg-0.2%Sc Alloys
Flow Behaviour and Constitutive Modelling of Aluminium Alloy Sheet for Hot Blank-cold Die (HB-CD) Forming
Friction Stir Processing and Welding of Wrought and Cast Aluminum Alloys: Property Evaluations and Novel Applications
Influence of the Twin-roll Casting Parameters on the Microsegregation in Thin Strips of the Aluminium Alloy EN AW-6082
Shaping the Mechanical Properties by Heat Treating the Cast Alloy AlSi30 Obtained by Rapid Solidification
Study of Wire Fabrication of Aluminum Treated with Diboride Particles
Towards Real-time Physics-based Simulation of Al Sheet Processing
Warm Forming of High-strength Al-Zn-Mg Alloys for Car Body Applications


Questions about ProgramMaster? Contact programming@programmaster.org