ProgramMaster Logo
Conference Tools for 2014 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2014 TMS Annual Meeting & Exhibition
Symposium Shape Casting: 5th International Symposium
Sponsorship TMS Light Metals Division
TMS Materials Processing and Manufacturing Division
TMS: Aluminum Committee
TMS: Solidification Committee
Organizer(s) Murat Tiryakioglu, University of North Florida
John Campbell, University of Birmingham
Glenn E. Byczynski, Nemak Canada
Scope - process-structure-property relationships in cast metals
- recent developments and innovations in shape casting technologies
- microstructural characterization of cast metals
- performance of shape castings
- new cast alloy development

Note: This biannual symposium was scheduled to be organized in 2013. However we were asked to delay it one year due to presence of other symposia with similar content. This symposium was approved by Solidification and Aluminum Committees.
Abstracts Due 07/15/2013
Proceedings Plan Planned: A print-only volume

A Draft Melting Procedure for Al alloys
Additive Manufacturing Supports the Production of Complex Castings
Analysis of Heterogeneous Nucleation in Ductile Iron
Control Diffusion Solidification(CDS): An Overview of Mechanism and Application
Correlation between Bifilm Index and Toughness of Aluminum Alloys
Correlation between Melt Quality and Fluidity of A356
Effect of Casting Condition in Semi-solid Aluminum Alloy Injection Process on Distribution of Defects and Density
Effect of Feeder Configuration on the Microstructure of Ductile Cast Iron
Effect of Si and Cu Content on the Size of Intermetallic Phase Particles in Al-Si-Cu-Mg-Fe Alloys
Efficient Use of Titanium, Boron and Strontium in Grain Refining and Modification of Die-cast A356
Electrochemical Behavior of Al-1wt.%Cu and Al-4.5wt.%Cu Alloys
Evolution of Filling System Design for an A356 Aluminum Housing Casting
Fluidity Characteristics of A356 Alloy with Various Thickness Sectioned New Test Mould
Impact of Section Thickness on the Microstructure and Mechanical Properties of Semi-solid Castings
Influence of Process Parameters on Blistering during T6 Heat Treatment of Semi-solid Castings
Integrated Casting-heat Treatment Technology for Near Net Shape ADI Casting Production
Magnesium Casting Processes:The HIMAC Project Re-assessed
Manufacturing Cost Modeling of Castings Produced with CRIMSON Process
Metallurgy without Bifilms; Fracture-free Plastic Deformation
Microstructure and Mechanical Properties of Automotive Components Die Cast with Secondary Al alloys by SEED Semi-solid Process
Near-net-shape Processing of 2024 Aluminium Alloy by SIMA Method
On Weibull Mixtures in Mechanical Properties of Castings
Prediction of Misruns in Thin Wall Castings Using Computational Simulation
Recent Advances on the Solidification Processing of Cast Energetic Materials
Reduced Pressure Test (RPT) for Bifilm Assessment
Reliability-based Casting Process Design Optimization
Shaping of Metals with Magnetic Fields
Studying on the Effects of Quenching Rate on Residual Stress in Al-5Mg and Al-Mg-Cu Alloys
Swage Casting of A356 (AlSi7Mg0.3) Alloy
The Effect of Grain Structure on Casting Durability Assessment in Al-Si Alloys
The External and Internal shrinkages in Aluminum Gravity Castings
The Formation of Hydrogen Related Porosity by Double Oxide Film Defects in Al Alloys
The Influence of Fe, Mn and Cr Additions on the Formation of Iron-rich Intermetallic Phases in Al-Si Die-casting Alloys
The Relationship between Elongation and Fatigue Life in A206 Aluminum Castings
The Sr Effect on the Intermetallic Phase of Eutectic Al-Si Alloy
Thermodynamics-based Computational Approach to AL-CU Alloys: Grain Refinement
Thin Wall Model for Use in Multiple Casting Conditions

Questions about ProgramMaster? Contact