ProgramMaster Logo
Conference Tools for Materials Science & Technology 2018
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting Materials Science & Technology 2018
Symposium Joining of Advanced and Specialty Materials (JASM XX)
Sponsorship The Metallurgy and Materials Society of CIM
Organizer(s) Mathieu Brochu, Mcgill University
Anming Hu, Beijing University Of Technology
Boian Todorov Alexandrov, The Ohio State University
Darren Barborak, WeldQC, Inc
Akio Hirose, Osaka University
Peng He, Harbin Institute of Technology
Zhiyong Gu, Univ of Massachusetts Lowell
Scope Abstracts and papers for the 20th Symposium on Joining of Advanced and Specialty Materials (JASM XX) are solicited on fundamentals and applications, and experimental, analytical, and computational studies related to (but not limited to): Welding and joining of conventional and advanced metallic alloys, ceramics, plastics, and composites; Welding and joining processes including arc welding, high energy density and hybrid processes, additive manufacturing, friction stir welding, solid-state joining, brazing and soldering, micro/nano-joining for microelectronic and micromechanical applications, joining for alternative energy sources; Welding metallurgy, weldability, characterization of microstructure, mechanical behavior and service performance of welds and welded structures for power generation, oil and gas, petrochemical, aerospace, automotive, and defense applications; Welding repair of critical structures, surface modification and weld overlays for corrosion, erosion, wear protection, and structural integrity.
Abstracts Due 04/05/2018
Proceedings Plan Definite: At-meeting proceedings

3-D Micro Joining in Stereolithographic Additive Manufacturing of Ceramic Components
Additive manufacturing for the fabrication of pylon in lower limb prosthesis
Brazing WC-CO to Inconel 600 Using Carbon Nanotubes Reinforced Cu-Zn Filler Metal
Can Polymer be Welded to Metal?
Characterization of Dissimilar Metal Welds Between Low Alloy Steel Butter Welds and Grade F65 Steel Using Alloy 625 Filler Wire
Chemically induced joining of silver nanomaterials for flexible electrodes
Chloride-induced Stress Corrosion Cracking Behavior in 304 Stainless Steel Weldments
Comparative analysis of the mechanical properties of aluminum alloys welded joints obtained by friction stir welding.
Cracking During Powder Injection Laser Welding of Alloy G-30
Determination of Interfacial Wavelength and Process Parameters in Impact Welds
Development of a Hybrid Ultrasonic-Resistance Spot Welding System for Aluminum Sheet
Development of a numerical model for dissimilar joining by FSW
Development of Graded Transition Joints for Avoiding Failure of Dissimilar Welds in High Temperature Service.
Development of methodology to determine the temperature influence on microstructure evolution during Friction Stir Welding
Development of V-Alloy/SUS316L Dissimilar Joint Using Friction Stir Welding
Effect of beam oscillation on porosity & intermetallic compounds formation of electron beam welded DP600 steel to Al 5754 alloy joints.
Effect of Electrode Material on Dissimilar Joints between Grade 70 SA-516 and Grade B SA-517 Carbon Steels
Effect of electron beam weld bead geometry on the mechanical properties of Ti6Al4V alloy
Effect of In addition on the thermal property, wettability and interfacial reaction of novel Sn–Zn–Bi–In lead-free solder
Effect of Interstitial Elements on the Solidification Behavior of High Chromium, Nickel Base Filler Metals
Effect of mass deposition on fatigue properties of newly developed ultra-narrow gap multipass PC-GMA weld for thick section
Effect of Materials on Weld Residual Stress of Ship Structures
Effect of Surface Condition on Resistance Spot Welding of Press-hardened Steel
Effects of process parameters and interface gap on laser welding quality of Ti6Al4V alloy
Effects of Titanium on Active Bonding between Sn3.5Ag4Ti(Ce,Ga) Alloy Filler and GaAs Substrate
Fabrication and performance of MnCoCuNiFe high entropy alloy nanopastes for brazing Inconel 718
Friction Stir Welding of Hot Rolled and Annealed Armor Steel
High-frequency linear friction welding of aluminum alloys and stainless steel
High Speed friction Stir Lap welding of Automotive Al alloys
High Temperature Mechanical Behavior near the Fusion Boundary in Grade 91 Steel Dissimilar Metal Welds
Hot Cracking Susceptibility of Alloy 617 by Varestraint Test
Impact welding for rapid repair of full-hard precipitation hardened steel
Improving dissimilar Titanium-Stainless Steel fiber laser joint strength through the changing of single interlayer thickness
Influence of microstructure on the fracture behavior of friction stir spot welded joint between zinc coated steel and 6061 aluminum alloy
Interface reaction and wetting kinetics of Ag-CuO doped with TiO2 over YIG ceramics
Joining of dissimilar metals - Inconel718 and En24 alloys by continuous drive friction welding
Laser Additive Manufacturing of Grade 91 F/M Steel
Laser nanojoining of copper nanowires
Liquid Metal Embrittlement in Resistance Spot Welding of Zinc Coated Advanced High Strength Steel
Materials Quality Assurance of Welded and 3D-Printed Structures
Metal-to-Silicon bonding using silver oxide reduction reaction and its mechanism
Microstructural Characterization of Low Alloy Steel Girth Welds for Joining of Internally Clad X65 Pipes
Microstructural Evolution of Dissimilar Metal Welds Involving Grade 91
Microstructure and strength of aluminum alloy jointed by piezoelectric actuator augmented resistance spot welding
Microstructure characterization and evaluation of mechanical properties for friction welded EN-24 alloy steel
Microstructures and Mechanical Properties of FSW joint of 430 MPa and 560 MPa grade steel
Modeling and Advanced Characterization of Nickel Base Alloys for Nuclear Propulsion Applications
Modeling of Severe Plastic Deformation in Mash Seam Welding using Improved Electro-Thermo-Mechanical Simulation
Molecular Simulations of Transient Liquid Phase Bonding of Ni-based Superalloy with Ni Nanoparticles
Multi-material integration for automotive structures using ultrasonic additive manufacturing
Multiscale Modeling and Damage Zone Analysis of Ni-Based Superalloy Brazed Joints for High Temperature Gas Turbine Engine Applications
Nanosolder Additions to Solder Pastes and their Effect on IMC Formation and Growth on Cu Substrate
Phase Transformations and Mechanical Properties of Welds Produced with a 10 wt% Ni Steel Welding Consumable
Photonic Controlled Structuring and Joining of Graphene and Metal-nanostructures for Flexible Electronics
Porous Nickel Interlayer Enabled Silver Brazing for Ceramic-Ceramic Joining and/or Dual Atmosphere Stainless Steel-Ceramic Joining,
Preliminary Investigations into LME Induced Failures in Advanced High Strength Steels
Process Based Qualification Components made by Welding and Additive manufacturing
Quantification of the Susceptibility to Ductility Dip Cracking in Welds of Ni-based Alloys
Quantitative Evaluation of Reheat Cracking Susceptibility in Weld Metal of Ni-based Alloys
Seal Ring Method for High-Temperature, High-Pressure Metal to Ceramic Transitions
Silver oxide decomposition assisted direct bonding of silicon carbide
Site-Selective Solder Deposition on Multi-Segment Nanowires for Nanowire Joining
Spot Impact Welding AA6111 using Vaporizing Foil Actuator Welding
Spot Joining of AA 7085 and DP 1180 Steel Using a Friction Riveting Approach
Strength Recovery in Welds of 17-4 and 13-8+Mo Maraging Stainless Steels
Stress Relief Cracking Of High Temperature Alloys
TEM-Investigation on Eutectic Phase Formation in Ni-30Cr Filler Metal 52XL
Tempering Response of Type 410 Welding Consumables and Base Metals
The effect of microstructure of steel on bonding interface formation between steel and Ni by ultrasonic welding
The effect of multiple weld thermal cycles on the microstructure and properties of HSLA-100
The Holy Grail of Welding - The Perfect Weldability Test
The Intercritical Heat-affected Zone of Steel Welds
The study of temperature distribution during Friction Stir Welding of dissimilar Cu-Al butt joints
Thermal Fatigue Properties of Ultrasonic Bonded copper joint
Three-dimensiona Numerical Simulation of Keyhole Dynamics based on Calculation of Coupled Multiphase Transfer during Laser Welding for Aluminum
Transit liquid phase bonding of Inconel 718 superalloy using Ni nanoparticle based filler
Twenty seven years of stirring it up – metallically speaking
Ultrasonic Bonding for LED Device Mounted on E-textile using Plastic Flow of Solder as Cushioning Material
Use of Modeling Tools for Controlling Weld Microstructure and Properties
Utilizing Ultrasonic Thermometry to Monitor Friction Stir Welding Temperature Profiles
Weld formation during ultrasonic welding of Al alloy to Cu
Weldability of Additively Manufactured 304L Stainless Steel
Weldability of Ta-bearing Ni-Base Filler Metal 52XL
Welding and Joining at Microscale and Nanoscale
Welding Metallurgy and Weldability of High-Temperature HEA System AlCoCrCuFeNi

Questions about ProgramMaster? Contact