ProgramMaster Logo
Conference Tools for 10th International Symposium on Superalloy 718 and Derivatives (2023)
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 10th International Symposium on Superalloy 718 and Derivatives (2023)
Symposium Superalloy 718 and Derivatives
Organizer(s) Joel Andersson, University West
Chantal K. Sudbrack, National Energy Technology Laboratory
Eric Allen Ott, GE Additive
Zhongnan Bi, Central Iron and Steel Research Institute
Scope Recent innovations in alloy research, along with novel processing techniques, continue to extend their applications in very challenging environments—ranging from corrosion resistance in the deep sea to extreme temperature, radiation, and pressure resistance in space applications. Technical presentations are carefully and stringently curated to ensure the highest quality programming at Superalloy 718 and Derivatives. This conference will provide an opportunity for authors to present technical advancements relative to a broad spectrum of areas while assessing their impact on related fields associated with this critical alloy group.

This conference is more industrially focused than other superalloys conferences, with technical topics focusing on alloy and process development, production, product applications, trends, and the development of advanced modeling tools. New developments in R&D, new processing methods, 3D printing, and other nontraditional applications will also be covered in the program.

Abstracts Due 06/13/2022
Proceedings Plan Definite: At-meeting proceedings

3D Chemical Mapping of Ni Based Superalloys at the Nanoscale
Abnormal Grain Growth Maps of Wrought Ni-Base Superalloys
Additive manufacturing of Inconel 718 and the derived complex concentrated alloys
Alloy Design and Development of a Novel Ni-Co based Superalloy GH4251
Alloy Design Strategies for the Development of Next-Gen IN 718 type Alloys for Disk Applications
An ICME framework to predict the mechanical properties of alloy 718 with different processing
Anisotropy in tensile properties of Inconel 718 produced by LMD-Wire
Application of Computational Materials and Process Modeling to Current and Future Aero-Engine Component Development and Validation
Applied Calphad to IN718 and its Cast & Wrought successors - a physics based approach with implications for phase stabilities, precipitation and microstructural modeling
Characterization of anisotropic behaviour of Inconel 718 parts manufactured by wire arc Direct Energy Deposition
Characterization of Haynes 230 powders manufactured by various processes and their performance on selective laser melting
Characterization of Laser Powder bed fusion of Nickel based superalloy Haynes 282
Characterization of γ′ precipitation behavior in additively manufactured IN738LC Superalloy via in-situ Small-Angle Neutron Scattering
Coherent precipitation and stability of cuboidal B2 nanoparticles in a ferritic Fe–Cr–Ni–Al superalloy
Comparison of Alloy 718 Material Produced by Different Metal Additive Manufacturing Technologies: LPBF, EBM, and DED
Compatibility of Wrought Superalloys with Supercritical CO2
Competitor Ti-comprising high entropy alloys to superalloy 718 for aeroengine applications
Continuous cooling heat treatment of additively manufactured Alloy 718 for oil and gas applications
Correlating Alloy 718 and Haynes 282 Solidification Microstructures to Local Thermal History using Laser Powder Bed Fusion Process Monitoring
Design of graded transition interlayer for joining Inconel 740H superalloy with P91 steel using wire-arc additive manufacturing
Development of novel thermal treatments for L-PBF alloy 718 material
Effect of heat treatment on the mechanical property and deformation mechanism of a novel cast nickel-base superalloy
Effect of post-heat treatments on the microstructural heterogeneity and γ’ precipitation in Haynes 282 processed by wire arc additive manufacturing
Effect of short-term isothermal exposure on the ductility signature of Waspaloy in the temperature range of 750-950°C – a comparison with Haynes® 282®
Effect of γʹ morphology on dynamic recrystallization of an advanced Ni-based wrought superalloy with columnar grains during isothermal compression
Effects of High-Temperature Oxidation on Fatigue Life of Additive-Manufactured Alloy 625
Effects of Pre-straining on the Tensile and Stress-rupture Properties of a novel Ni-Co Based Superalloy
Effects of Scan Strategy Induced Microstructural Differences on Thin-Wall SLM IN718 Fatigue Performance
Fabrication and weldability aspects of Ni- and Ni-Fe based superalloys – A Review
Factors Influencing Propensity for Stress Relaxation Cracking in Inconel ® Alloy 740H® and Practical Guidance for Applications
Fretting damage of Co-based supper alloy: microstructure and testing temperature
Grain-boundary Precipitation Control by P Phase and its Role in Creep in Ni-Cr-Mo Alloys at Elevated Temperatures
High-Temperature Properties of Alloy 718 Made by Laser Powder-Bed Fusion
Hot Ductility of EBM-Manufactured Haynes 282
In-situ HT-EBSD measurements and calibration of multi-class modeling of grain growth and delta phase dissolution kinetics of alloy 718
IN718 Cold Gas Repair Spray of Large Cavities – Microstructure and Residual Stresses
Investigating Deformation Mechanisms in 718 and 718-variant Superalloys with γ'- γ" Coprecipitates
Keyhole TIG welding of new Co-lean nickel-based superalloy G27
Linking stress rupture properties to processing parameters of HAYNES® 718 nickel superalloy via machine learning
Local assessment of mechanical properties in forged alloy 718 components based on the simulation of the microstructure evolution during production
Long-term stability of Waspaloy produced by Wire Arc Additive Manufacturing (WAAM)
Long Term Thermal Stability and Oxidation Resistance of HAYNES 233 Alloy
Manufacturing Large Superalloy Pipes, Bends and Fittings
Microstructure and mechanical characterization of friction stir welded alloy 718
Microstructure and mechanical properties of selective laser melting processed TiC/GTD222 nickel-based composite
Modeling the Influence of Porosity and Build Parameters on Fatigue of AM IN718 using Machine Learning
Multi-variate process models for predicting site-specific microstructure and properties of Inconel 706 forgings.
Novel Materials Design Technology for Thermal Power Generation toward Carbon Neutrality
Process optimization of Electron Beam Powder Bed Fusion with Haynes 282
Segregation and Freckles in Alloy 718 and Related Alloys
Significant Role of Grain-boundary Alpha-W Phase in Creep of Ni Based Superalloys
Strain localization under monotonic loading near annealing twin boundaries
Study of the Microstructural and Elastic Properties of Additively Manufactured IN718 using Resonant Ultrasound Spectroscopy
Subcritical Crack growth of 718 alloy in marine exposure conditions and microstructural modeling
Surface roughness of additively manufactured IN718 & H282 superalloys from multi-size and multi-laser machines
Tailoring the γ- γ′-γ″ dual superlattice microstructure of Ni-Based superalloy IN725 by high temperature aging and Nb/Ta additions for superior creep properties
Tensile performance of direct energy deposited IN718 and oxide dispersed strengthened IN718
The effect of microstructure on the strength of VDM Alloy 780
The hot corrosion behavior of a GH4720Li disk superalloy at 700℃
Towards enhancing hot tooling to form high-𝛾′ superalloys
Towards Hydrogen Embrittlement Resistant Alloy 725: A Multiscale Approach
Triple melting: about the possibility to avoid it
Understanding Annealing Behavior during Post-Build Heat Treatment of Ni-Based Alloys Across Additive Manufacturing Processes
Utilizing of short collar mold for ESR of Superalloys
Welding process and thermal aging influence on metallurgical and tensile properties of AISI 304L/Inconel 625 dissimilar welds

Questions about ProgramMaster? Contact