A New Approach for the Production of Li4SiO4 Powder

A Study on Recovery of Iron from Red Mud by Solid State Reduction Followed by Magnetic Separation

Control of the Distribution of Vacuum Arcs within Vacuum Arc Remelting with Externally Applied Magnetic Fields

Effect of Additives on Semi-molten State Reduction for Titanium Slag Production from Ilmenite Concentrate

Effect of Magnetic Field on CaO-SiO2-CaF2 Mould Flux：New Insight from Molecular Dynamic Simulation

Experimental Study on Water Model of Continuous Smelting Reduction Reactor

FactSage-based Design Calculations for the Production of High Carbon Ferromanganese on Pilot-scale

High Temperature Processing of Tungsten Slag

Influence of Atmosphere on Melting Behaviour of Synthetic Slags from Ta Recycling

M-12: Effect of Steel–slag Reaction on Physicochemical Properties of Low-reactivity Mold Fluxes

M-14: Experimental Research on Gasification Dephosphorization with Coke Powder Reducing Converter Molten Slag

M-18: Fundamental Research on Preparation of High-speed Railway Grounding Line by Continuous Pouring Process for Clad

M-22: Influence of Process Parameters on the Metal Quality at Electron Beam Melting of Molybdenum

M-25: In-situ Investigation of Iron Ore Stock Pile during its Stacking and Reclaiming Process

M-2: A Novel Method to Determine the Bubble Dynamics of the Bath in a Pilot-scale Top Submerged Lance Furnace

M-32: Reduction Kinetics of Oxidized Magnetite Briquettes in Co-atmosphere

M-37: Sinter Iron Ores and Titanium Ores Used in Pelletizing

M-39: Study on Coal Injection Evaluation Method in Blast Furnace

M-40: Study on Distribution of Sulfur Element in Blast Furnace Process with Different Pellet Ratios

M-41: Study on Tuyere Coke Deterioration in the Super Large Blast Furnaces

M-43: Synthesis of Ni-Mgo Composite through Sulfates Reductive and Catalytic Decomposition

M-44: Synthesis of Porous Graphite by Dealloying of Silicon Carbide

M-5: Analysis of Post-combustion Behavior on O2 Gas Injection in Converter Process

M-6: Characterization and Treatment of Electric Arc Furnace Dusts Generated During Steel Production in Peruvian Industries

M-8: Drying Characteristic of Artificial Magnetite Pellet

Mechanical Properties of a Laser Deposited Spherical Ti4822 Alloy

Method to Quantify the Effect of Temperature and Rotational Speed on the Decrepitation of South African Manganese Ores in a Rotary Kiln

Ni Recovery from Nickeliferous Pyrrhotite Concentrates via a Thermal Concentration Process: Effects of Heat Treatment Time

Optimization of Process Parameters for the Synthesis of Mo2C on an Activated Carbon Matrix

Parameters Affecting on the Phosphorus Distribution Between Slag and Liquid Metal in BOF

Phase Equilibria in the System Al2O3-MnO-SiO2: Thermodynamic and Application

Precipitation Behavior of B2O3 Addition on CaO-Al2O3-Sc2O3 Slag System Through In-situ Observation

Preparation of Expanded Slag Ball with Blast Furnace Slag by Rotary Cup

Production of a Cobalt-Nickel-Iron Alloy from Low Grade Ore

Simulation Model for Slag/Refractory-corrosion in the Metallurgical Engineering

Solid-state Reduction Studies for Recovery of Iron from Red Mud

Technology Advances in Pyrometallurgy with Focus on Recent Development of Sustainable Processes – Experiences of Swerim Pilot Plant Activities

The Application of an Effective Equilibrium Reaction Zone Model Based on CALPHAD Thermodynamics to Steel Making

The Development of a Heat and Mass Transfer Model for a Shaft Kiln to Preheat Manganese Ore with Hot Air, Model Development Methodology

Theoretical Analysis and Experimental Verification of Formation of As-bearing Rare Earth Inclusions in Steel

Upgrading Pilot-scale Facility at MINTEK to Evaluate the Effect of Pre-heating on Smelter Operations

Questions about ProgramMaster? Contact programming@programmaster.org