ProgramMaster Logo
Conference Tools for Materials Science & Technology 2018
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting Materials Science & Technology 2018
Symposium Ultra High Performance Metallic Systems for Aerospace, Defense, and Automotive Applications
Sponsorship The Metallurgy and Materials Society of CIM
Organizer(s) Ali Yousefiani, Boeing Research And Technology
Troy D. Topping, California State University, Sacramento
Robert Peter Dillon, Jet Propulsion Laboratory
Linruo Zhao, NRC Aerospace
Scope This symposium focuses on the research and development of novel metallic materials that show potential for significant improvements in application target properties vs. commercially available materials. Typically, ultra high performance refers to at least 50% improvement in properties of interest when compared to the current state of the art. However, research and development efforts working towards this goal will also be considered. Target properties include: room/elevated/cryogenic temperature strength; fracture toughness; fatigue strength; creep strength, corrosion resistance; resistance to tribological and environmentally assisted damage; thermal stability; weldability; formability; machinability, thermal/electrical conductivity, thermal expansion, density, etc. Ideally, presentations in this symposium will discuss implementation and transition challenges, teaming opportunities, and cost or scale-up barriers and potential solutions. Multifunctional material solutions are specifically encouraged. Proposed session topics include, but are not limited to the following metallic material systems that show promise of ultra high performance:
• Ultrafine-grained and Nanostructured
• High Entropy
• Composite/Hybrid/Graded
• High Thermal Stability
• High Temperature
• High Weldability/Formability/Machinability
• Structural Bulk Metallic Glass
• Structural Shape Memory
• Advanced Coatings and Surface Modification
Abstracts Due 04/05/2018
Proceedings Plan Definite: At-meeting proceedings
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

Addressing the Need for Thermophysical Property Data of Metal and Alloys for New Material Development
An Integrated Computational Materials Engineering (ICME) Design and Scale-up of High-entropy Alloys (HEAs) for Turbine Alloy Replacement
Binder Jetting 3D Printing of Fe77Ni5.5Co5.5Zr7B4Cu1 Magnetic Powders
Cyclic Oxidation Performance of Three Ni-based Superalloys at 900C in Air
Densification and Flow Stress Analysis of Al-SiCp Metal Matrix Composites Processed by Direct Powder Forging
Design and Development of Ultrafine-grained, High-strength Silver
Developing Aluminum-rich Metallic Glasses for Selective Laser Melting
Development and Exploration of Refractory High Entropy Alloys: A Review
First-principles Methods of Calculating Stacking Fault Energies in Refractory BCC High-entropy Alloys
Formation of Identical Fine Grained Microstructures with High Impact Resistance in as Cast and as Hot Rolled Conventional Low Alloy Structural Steels
Heat Treatable Cr-based Alloys and the Improvement of their Oxidation Resistance by Alloying
High-performance Magnetic Alloys and Gradients through Additive Manufacturing
High Strength and Deformability of Super-strong Nanotwinned Al(Fe) Alloys
Hot Cracking Phenomena in Light-weight Armor Steel
Hydrogen-induced Intergranular Failure of Compositionally Complex Equi-molar FeNiCoCr Alloy
Long-term Annealing of Mechanically-alloyed Refractory High Entropy Alloy
Mechanical and Thermal Stability of Nanocrystalline High-entropy Alloys
Mechanical and Wear Properties of Zr-based Bulk Metallic Glasses Produced by Additive Manufacturing
Mechanical Anisotropy in Extruded Metal Matrix Composites
Nanoporous Stainless Steel with Structural Hierarchy
Processing Scalability and Quaternary Additives for Improved Mo Matrix Mo-Si-B
Processing, Microstructure and Mechanical Characterization of MgAlLiZnCaCu High Entropy Alloy
Quality Assurance of the GTE Cast Blades Protective Coating
Spall Prevention in Additively Manufactured Composites under Hypervelocity Impact Conditions
The Effect of Titanium on the Tungsten-free Cobalt-base Superalloys
The Microstructure and Mechanical Properties of High Strength, Ductile, Eutectic FeNiMnAl(Cr,Ti) High-entropy Alloys
Toward Understanding the Negative Influence of Oxygen in Nanograin Size Stability of Fe14Cr4Hf Alloy
Ultra-conductive Alloys for Low-volume, Low-weight Applications


Questions about ProgramMaster? Contact programming@programmaster.org