3D Interconnected Calcium Phosphate Scaffolds for Bone-Tissue Engineering

A Materials Investigation of the UV Degradation of Eco-friendly, Polypropylene Polymer Composites with Kenaf Fibers

A study of the high rate response of squeeze cast magnesium alloy AZ91

A Study on the Microstructure and Mechanical Properties of the Powder Injection Molded WC-8%Co.

A Study on the Microstructures and Electromagnetic Interference Shielding of Sn-Al-Ni Thin Films

A Study on the Stress Test of Truck Frames for Freight Trains

A Study on the Structural Design of the Car Body of a Locomotive

A Study on the Structure and Mechanical Properties of HSS T42 Steel Using Powder Injection Moulding Method (PIM)

A Thermo-Kinetic Model and Experimental Analysis of Multiple Passes Laser Phase Transformation Hardening by Using High-Power Direct Diode Laser

Aerosol Route Synthesis of Copper Oxide Nanoparticles Using Copper Nitrate Solution

AlGaAs-Based Optical Device Fabricated on Si Substrate Using Microchannel Epitaxy

Ambient Temperature Stress Corrosion Cracking of 304L Stainless Steel

Analysis of oxide formation in high Mn twinning-induced plasticity-aided steel during dew-point control

Anisotropic Behavior of Rolled AZ31 Magnesium under Quasi-Static and High Rate Loading

Annealing behavior of TiO2-sheathed Ga2O3 nanowires

Atomic-scale Characterization of Grain Boundary Embrittlement in Structural Steels

Atomistic study of dislocation/vacancy interactions in bcc metals

Basic Study on Synthesis of Sphalerite with Low Iron and Oxygen Pressure Acid Leaching of Sphalerite

Carpenter ACUBE™ 100 an Alternative Copper-Beryllium Alloy for High-Load Bushings and Bearings Applications

Comparative Study of Microstructural Characteristics of PM Sintering and Plasma Spraying Coating on a Steel Surface

Comparison of Stress Corrosion Cracking and Hydrogen Embrittlement Resistance of High Strength Aerospace Alloys

Corrosion Behavior of Al-Si-Cr-Ni-Cu Bearing Low Carbon Steel in A Cyclic Dry/Wet Laboratory Test

Corrosion Behavior of Aluminum Matrix Composite (AMCS) Prepared by Atomization

Defect Energetics and Fission Product Transport in ZrC

Deformation Field and Microstructure of Copper in Flat Punch Indentation

Deformation in Shock-Loaded Materials

Deformation of High Purity Copper Specimens in Compression between Flat and Grooved Dies

Dendrite Tip Shape in Pivalic Acid-Ethanol and Succinonitrile-Salol Systems

Development of In-Situ Mg-Based Bulk Metallic Glass Composites with High Plasticity

Development of Ultrasonic Techniques for Process Control in Iron and Steel Making

Dissolution of Platinum from Scrap Automotive Catalytic Converters Using a Combination of HCl+H2O2

Dynamics research on leaching process of bonded copper oxides strengthen by mechanical activation

EDM and AWJ Edge Finishing on Surface Morphology of Hybrid Composite Laminates

Effect of niobium on solidification structure of gray cast iron

Effect of Nitrogen Addition on Isothermal Phase Transformation and Mechanical Properties in Biomedical Co-Cr-Mo Alloys

Effect of Non-Sinusoidal Oscillation Parameters on Liquid Friction and Lubrication near the Meniscus of Slab Continuous Casting Mold

Effect of Particle Size on the Microstructure of Rapidly Solidified Hypereutectic Iron Alloy Powder

Effect of Silicon Addition on the Microstructure and Mechanical Properties of Extruded Mg-Zn Alloys

Effects of Lamination on Mechanical Behavior of Nano-Structured Aluminum Composite

Effects of Material and Process Parameters on Final Residual Stress and Distortion Predictions during Welding of Steel

Effects of Mesh Size on Final Residual Stress and Distortion Predictions during Welding of DP600 and AISI 316L Steel Plates

Effects of Microstructural and Mechanical Length Scales on Fatigue Crack Propagation in Beta-Annealed Ti-6Al-4V

Effects of Post-Deformation Annealing Conditions on the Behavior of Lamellar Cementite and the Occurrence of Delamination in High Sthrength Cold Drawn Pearlitic Steel Wires

Effects of Twin on the Mechanical Behavior of Mg Single Crystals

EKOLUBE™, the Economical, Eco-Friendly Solution for Sendzimir™ 20Hi Mills

Electrical Conductivity Manipulation and Switching Phenomena of PBZT Thin Film by Doping Process

Electrochemical Behavior of Ni-Cr Base Alloys in Corrosive Environment

Electrochemical Behavior of RuO2-IrO2-SnO2/Ti Electrode Under Mild and Forced Conditions

Electrochemical Impedance Spectroscopy of SEI on Porous SnO2/CNT Composite Anode for Lithium Ion Batteries

Enhanced Mechanical Properties in Mg-Based Ultrafine Eutectic-Dendrite Composites

Enhancing Mineral Beneficiation by High Intensity Power Ultrasound

Evaluation of High Energy Milling Behavior of ZnO Powders in Different Milling Conditions

Fabrication and Mechanical Properties of NbC-binders (Co, Ni. Fe) Nano-Composite Consolidated by High Frequency Induction Heated Sintering.

Fabrication of FeS2-Pyrite Cathode by Spay Dryer Methode

Fabrication of the Mg/Al clad sheet and its mechanical properties

Facile Synthesis of Hollow Co3O4 Microspheres by Solution Spray-Oxidation Method and Its Properities as Supercapacitors

Fast SET Switching Behavior of Nano-Scale Aginsbte Based Phase Change Memory

Fatigue Life Prediction for Notched Structures using Mechanistic Multistage Fatigue Model

Fatigue of Hybrid Polymeric Composites on Twisting

Finite Element Analysis of Residual Stress of Plasma-Sprayed Coatings on Thick Wall Components Based on Nastran software

Flip Chip Bonding of Sn-58Bi Solder Bumps Formed on Flexible PCB

Formation of Different Generations of Gamma Prime Precipitates in Rene 88DT Nickel Base Superalloy

Fracture and Fatigue of Fe-based Metallic Glass Ribbons

Furnace Pressure Control System

Glass Forming Ability and Mechanical Properties of Zr-based Zr-Al-Ni Metallic Glasses

Grain Boundary Character Distribution and Mechanical property of an as cold rolled High Nitrogen Austenitic Stainless Steel

Heterogeneous Phase Nucleation and Growth in ß-Ti Alloys

High Reliability Bonding Process Using Ag-Cu Mixed Nanoparticles

Impact toughness Enhancement of an Electron Beam Welded Ti-6Al-4V Titanium Alloy through Post-Welding Heat Treatment

Impacts of impurities on the Properties of Secondary Al-Si-Cu alloys

Improvement of Heat Dissipation in High-Power Light-Emitting Diodes Using Highly Heat Conductive Die-Attach Material

Influence of Cold Working and Grain Size on the Pitting Corrosion Resistance of Ferritic Stainless Steel

Influence of Forming Ratio on Mechanical Properties of Pipe Line

Influence of Shock Prestraining and Texture on the Dynamic-Tensile-Extrusion of High-Purity Zirconium

Influence of The Magnesium Addition on the Strength, Ductility and Microstructure of Al-7.4Zn At.% Alloy Artificially Aged at Different Times

Interfacial Reactions of Pure Sn、Sn-3.0Ag-0.5Cu and Sn-9.0Zn Lead-free Solders with the Fe-42Ni Substrate

Investigation of Possibility to Metallic Interconnector on the IT (Intermediate Temperature) SOFC

Investigation of Weldabiliy during Laser Lap Welding of Dissimilar Al Alloys

Investigation on the compressive properties and microstructural of new sand polymer composite

Investigation surface faint-sliver defects of cold-rolling IF steel sheets from slabs produced by continuous casting

Investigations of Shock_Wave Induced SHS Reactions in Ni-Al System

Joint Strength of Cu-Sn58Bi-Cu Bonding with Cap Bump Thickness Variation

Kinetics of Titanium and Chromium Carbides Coating Produced on ‎Structural Steel by Thermo-reactive Deposition Technique

Laser Beam Welding of Haynes 188

Lattice Constant Effect on the Deformation Behavior of Mg-Zn-Re Alloys

Local Stress and Strain Analysis of Atomistic Simulations

Low Temperature Bonding Process Using Cu Nanoparticles

Magnetic Properties of High-Coercivity Nanocrystalline Pr-Fe-Co-Al-B Bulk Amorphous.

Mechanical Properties and Rapid Consolidation of Binderless Nanosturctured Tantalum Carbide from Mechanically Activated Powder by Pulsed Current Activated Sintering

Mechanical Properties of Consolidate of Nanostructured Niti Alloy by Rapid Sintering

Mechanical Properties of the Ti-Nb-X%HA Biomaterials Fabricated by High Frequency Induction Heated Sintering using High Energy Ball Milled Powders

Mechanical Strength Change of Dissimilar Friction Stir Welded Joint between Al and Mg Alloys by Probe Position Variation

Microstructural Characterization of the Composite Alznag Clad Coating on Alfe

Microstructural Weak Links For Spall Damage In Polycrystalline Metals

Microstructure and Formation Mechanical of 3D-Meshy SiC/2Cr13 Composite Interface

Microstructure and Phase Evolution of Uranium and Dysprosium Nitrides Formed During Reactive Ball Milling

Microstructure Changes in Primary Recrystallization of Grain-Oriented Silicon Steel by Pulse Current Intermediate Annealing

Microstructure Components and Mechanical Properties of an Acicular Ferrite Pipeline Steel

Microstructure Development of Silicon Steel Prepared by Near-Rapid Solidification

Microstructures and Four-point-bending Fatigue Behavior of Three kinds of Low-carbon Steels for Load-Chain Materials

Microstructures and Mechanical Properties of AM60B-based Eco-Mg Alloys

Modeling the Effect of the Contact Surface Temperature on the Deformation of an Aluminum Pin During A Wear Test

Molecular Dynamics Simulation of Au-Rh Precipitates Structure

Monitoring Particle Pulverization in Composite Silicon Anodes for Lithium Ion Batteries by Acoustic Emission

Neutron Diffraction Measurements of Residual Stresses in Bent Stainless Steel Pipes

Numerical Simulation of Alumina Sintering

On the Role of Pieirls Stress in the Shock Response of Cubic Metals

Oxidation and Ignition Resistances of AM60B-based Eco-Mg Alloys.

Oxidation Behavior of Zrb2-Zro2 Composites Prepared by Spark Plasma Sintering

Phase Decomposition during Aging in an Al-22wt.%Zn Alloy

Plasma-Polymerization of Hexamethylcyclotrisiloxane Using Atmospheric Pressure Dielectric Barrier Discharge

Prediction of Rapid Solidification Nanosize Structure for Aluminium Alloys

Preparation and Characterization of Nanocrystalline Silver Particles

Preparation of Iridium Fine Particle by the Effect of Grinding Additive, Nacl

Pressurless sintering of Al2O3-SiC nano composites and effect of additives on sintering temperature

Process modeling for synthesis of Metal Matrix Nanocomposites

Producing of Composite Layer of TiO2/Al5083 via Friction Stir Processing

Production of Boron Fiber in a CVD Reactor

Production of Porous, Intermetallic Titanium Aluminide Reinforced Titanium Matrix Composites by Powder Metallurgy Method

Production of Titanium Carbide Reinforced Titanium Matrix Composites via Powder Metallurgy Method

Properties and Performance of Composites Based on Superrefractories Cements

Properties and Rapid Consolidation of Nanostructured Tasi2 from Mechanically Synthesized Powder by High Frequency Induction Heating

Properties and Rapid Consolidation of Nanostructured Ti from Mechanically Activated Ti and Tih2 By High Frequency Induction Heated Sintering

Qualitative Analysis of Temperature Evolution in Railway Brake Disc

Quality and Productivity Improvements for Wire and Cable Industry

Quality Control of the Refining Process at Electron Beam Melting and Development and Implementation of Engineering Support System for Process Modeling and Control

Quality of Slab Ingots and Heavy Plates Produced by a 40t ESR Furnace

Rapid Consolidation of Nanocrystalline 2Fe-Al2O3 Composite from Mechanically Alloyed Powders by Pulsed Current Activated Sinterin

Rapid Solidification of Fealcr-B2 Intermetallic Compounds - Microstructure and Mechanical Behavior

Recovery of Metallic Values from Spent Li Ion Secondary Batteries

Removal of phosphorus from high-phosphorus iron ores by selective HCl leaching method

Rhodium Recovery from Spent Rhodium Plating Solutions

Rotary Ultrasonic Drilling of Al2O3 Ceramic Material

Scrap Modified Alloy Design of Wrought Aluminum Alloy

SEM Analysis of Worn Carbon Cathodes in Industrial Aluminium Electrolysis Cells

Silver Recovery from Silver-Rich Photographic Processing Solutions by Copper

Silver Recovery from Waste Radiographic Films Using Different Methods

Simulation of Dislocation Interaction with Precipitates

Simultaneous Synthesis and Consolidation of Nanostructured Ti-Zro2 from Mechanically Activated Powders by High Frequency Induction Heated Combustion

Sintering Behaviors of Zrc Nanoparticle Dispersed Tungsten Based Composites.

Sintering Densification and Microstructural Characterization of Mechanical Alloyed Fe-Mn-Si based Powder Metal System

Sintering Kinetics of SPS Tungsten and Tungsten-Ceria Cermets

Small Punch Creep of Service-Exposed SUS 316 HTB Superheater Tubes of Fossil Boilers

Spark Plasma Sintering of Next Generation Nuclear Materials

Step-Wise Exothermic Reactions in Cold-Rolled Ni/Al, Ti/Al, and Ta/Al Multilayer Foils

Structural and magnetic properties of nanocrystalline Fe–Si–Ni powders produced by mechanical alloying

Structural and Morphological Characterization of Composites of Nylon 6/Ferrite Nife2o4.

Structure and Thermal Oxidation Properties of RuAl and Ru-Al-Ti Alloys Prepared by Mechanical Alloying

Study of Metal-oxide Composites Prepared by Ball Milling and Evaluated as Inert Anodes for Aluminum Production

Study on Magnetic-Gravity Combination Separation and Acid Leaching of a High Phosphorus Fine Hematite

Study on Visible Light Photocatalytic Performance of Nano Tungsten Trioxide

Surface Treatment of Materials by Low Energy High Current Pulsed Electron Beam under Evaporating Mode

Synthesis of Ag/ZnO Nanocomposite Particles by Ultrasonic Spray Pyrolysis Method

Temperature and Stress Effects on Cathodic Hydrogen Charging of High-Strength Line-Pipe Steels

Temporal Evolution of A Ni-Al-Cr Superalloy with a Dilute Ruthenium Addition

Tensile Deformation Behavior of Zr-based Bulk Metallic Glass Composite with Different Strain Rate

Tensile Failure Analysis of Railway Steels Using Infrared Thermography NDE Technique

The Effect of Calcium on Preventing Grain Growth of Al-Zn-Mg Aluminium Alloy

The Effect of Polymer Structures, Nanoparticle Loadings and Nanoparticle Surface Treatment on the Dynamic Shear Rheological Behaviors of PolydimethylSiloxane (PDMS)

The Effects of Nickel in Oxide Layers on the AZ91 Mg Alloys Synthesized by Plasma Electrolytic Oxidation

The Estimation of the Characteristic of Trivalent Chromium Coated Layer According to the Plating Conditions

The Structure Dependence of Rolling Contact Fatigue Damage around Small Cracks for Tempered Martensitic Steel by Electron Backscatter Diffraction Analysis

Thermal Oxidation of Titanium Wires

Thermal Tensioning During Welding of DP600 Steel Plates

Thermographic Detection of Artificial Flaws in Polymer Matrix Composite Panel

Three Dimensional Carbon Nanotube Photovoltaics

Transient Oxidation and Grain Boundary Characteristics

Transient Thermal Tensioning during Welding of AISI 316L and DP600 Steel Sheets

Transition Metal Oxide-Doped Batio3 Thin Films Prepared by R.F. Magnetron Sputtering

Twinning during the tensile deformation of a TWIP steel

Water Modeling Study on the Behavior of Inclusions in a Gas-Stirred Ladle with Two Tuyere

Questions about ProgramMaster? Contact programming@programmaster.org