ProgramMaster Logo
Conference Tools for 2019 International Conference on Biofabrication
Login
Register as a New User
Help
Submit An Abstract
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2019 International Conference on Biofabrication
Symposium Biofabrication 2019
Organizer(s) Ciro Rodriguez, Ohio State University
David Dean, Ohio State University
Scope The field of biofabrication is dedicated to researching and integrating technologies such as bio-printing, bio-plotting, and bio-assembly into pharmaceutical applications such as engineered tissue systems and regenerative medicine. As this field is rapidly growing and evolving, the topics and key words listed below should be looked upon as a guide, rather than restrictions. Paper submissions on related topics that are not spefically mentioned below are encouraged, and will be considered for inclusion in the program.
Technical topics will include, but are by no means limited to:
Fabrication Technologies, especially 3D Printing
Bio-Inks and Advanced Biomaterials
Evaluation, Characterization, and Quality Control for Biofabrication
Biofabricated Tissues and Organs
On-Chip Applications
Biofabrication from the Perspective of Industrial Applications

Biofabrication Key Words:
Musculoskeletal Tissues (including Bone and Cartilage)
Vascularization
Biofabrication and Cancer
Spheroids
Organoids

Please follow the abstract formatting instructions available at www.biofabrication2019.org.

This symposium is now open for invited presentations only. Please click on the button below to submit the abstract form if your abstract was invited by a conference organizer.
Abstracts Due 07/01/2019
Proceedings Plan Undecided
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

3D-Bioprinted Lattices for Efficient Expansion of Neural Stem Cells
3D-Patient Derived Ovarian Tumour Model to Investigate Early Stages of High-grade Serous Ovarian Cancer
3D Bioprinted Renal Tissue Constructs using a Novel Photo-crosslinkable kidney ECM-derived Bioink
3D Bioprinting for Future Space Exploration – The European Perspective
3D Bioprinting of a Mechanically Reinforced Hybrid Tissue Construct for Advanced Fibrocartilaginous Regeneration
3D Bioprinting of Hepatocytes–core/shell Structured Cocultures with Fibroblast for Enhanced Functionality
3D Bioprinting of Hybrid and Gradient Structures for Critical Size Bone Defects
3D Bioprinting of In Vitro Metastatic Cancer Models
3D Bioprinting of Multiphasic and Multicellular Osteochondral Tissue Substitutes Featuring a Spatially Defined Distribution of Cell Types and Differentiation Factors
3D Bioprinting of Tumor Cell-laden Hydrogel Chips
3D Cell Printing of Perfusable and Vascularized Human Skin Equivalents Composed of Epidermis, Dermis, and Hypodermis for Better Recapitulation of Skin Anatomy
3D Cell Printing of Prevascularized Stem Cell Patch for Treatment of Liver Cirrhosis
3D Culture of Multicellular Tumor Spheroids (MCTS) and Drug Testing in Concave Microwell Arrays under Different Oxygen-permeable Conditions
3D Hydrogels and Bioinks for Realistic In-Vitro Modelling and Bioprinting
3D In Vitro Model of Human Gut Microbiota
3D Printing of Chitosan-based Scaffolds for Wound Healing
3D Printing with Living Cells
4D Maturation Control of Tissues Produced by Laser-Assisted Bioprinting (LAB)
A 3D Model of the Human Omentum Designed by Bioprinting Technology
A Bioprinted Multicellular Glioblastoma Model
A Bioprinting Approach to Regenerate Cartilage for Microtia
A Coaxial Bioprinting Platform for Biofabrication of Implantable Islet-containing Constructs
A Comprehensive Study towards a Scalable and Reproducible Synthesis of Bioinks and its Sterilisation
A Gelatin-based Interpenetrating Polymer Network Hydrogel as a Promising Ink for Bioprinting Applications
A High-throughput Approach for the Investigation of 3D-printed Hydrogel Materials for Biocatalytic Reactors
A Multifunctional DNA-origami Platform for Biomolecular Detection in Cellular Microenvironments
A Novel Controllable Cell Array Printing Technique on Microfluidic Chips
A Surgical Robotics Based Additive Manufacturing Tool for Intracorporeal Tissue Engineering
A Versatile, Enabling Platform for Vascularizing Tissues and Tissue Models
Accessible Ossicle Model for Studying Tumor-Induced Bone Disease
Actin Microfilaments and Microtubule Networks Contribute Differently to Biomechanical Properties of Tissue Spheroids
Advanced Biofabrication Methods for Large Cartilage Organs
Advanced Firmware and Hardware for Multiscale and Multimaterial Bioprinting
Alginate-based Bioinks for Bioprinting of Pancreatic Islets and Blood Vessels with a Coaxial Needle Setup
Aligned Electroconductive Electrospun Patch as a Novel Biomaterial for Cardiac Tissue Engineering
Altered Myeloid-derived Cell Populations by Bisphosphonates Results in Changes to the Development of Tissue Engineered Vascular Grafts
An Integrated Cell Printing Approach for the Construction of Heterogeneous Tumor Models
Anisotropic Scaffold Fabrication using High-Throughput 3D-Melt Blowing
Application of Additive Manufacturing for Novel Transcatheter Heart Valve Stents
Aspiration-assisted Bioprinting
Assessing the Bioprintability of Self-Assembling Peptide Bioinks: Structure Fidelity and Cell Viability
Automated Biomanufacturing Platform for Perfused Tissues
Between Air and Liquid: A Physiologically Relevant Pulmonary Organoid
Bio-dot Printing for Precise Positioning and In-situ Formation of Cell Spheroids
Bioengineered Periost Membrane Combining -spheroids and Melt Electro-writing Technology
Bioengineering of Skeletal Muscle Tissue with Innervation Capability for Accelerated Restoration of Pelvic Floor Muscle Function
Biofabrication for In Vitro Tissue Engineering
Biofabrication of the Tubular Construct of Tissue Spheroids in an Ultrasonic Field
Biofabrication of Tubular Grafts via Melt Electrowriting and Combined Approaches
Biomanufacturing of Organ-specific Tissues with Embedded Vasculature
Biomimetic Design Strategy of 3D Bioprinted Bone Construct for Craniomaxillofacial Reconstruction
Biomolecules of Recombinant rhBMP-7 and rhVEGF165 Protein Self-assembled on Electrospun PCL Fiber by LbL Technique for Tissue Regeneration
BioPapers: Naturally-derived Biopolymers for Next Generation Cell Culture
Bioprinted Trachea Constructs with Patient Matched Design, Mechanical and Biological Properties
Bioprinting 2-Dimensional and 3-Dimensional Exosome Microenvironments
Bioprinting of Complex 3D Vascular Networks within Cell-Laden Hydrogels
Bioprinting Scaffolds for Tissue Engineering Applications
Characterization of a Poly(lactic-co-glycolic) Acid - Hydroxyapatite 3D-printed Scaffolds for Bone Tissue Engineering
Characterization of Commercial Photoinitiators and UV-Absorbers in DLP Bioprinting
Coaxial Cell Printing of Freestanding, Perfusable and Functional In Vitro Vascular Models for Recapitulation of Native Vascular Endothelium Pathophysiology
Collaborative Robotic Arm-based Bioprinter for In-situ Bioprinting
Collagen-based Materials from Bench to the Bedside: A Long Journey
Combination of Smart and Biodegradable Materials and Biofabrication Techniques for the Treatment of Osteoporotic Fractures: The Challenge of GIOTTO Project
Comparing the Properties of Various Sources of Collagen Hydrogels for Bioprinting and Tissue Engineering
Composite Hydrogel Printing as a Strategy to Protect Cells from Photoinitiator Radical Damage
Computational Simulation of Cell Spheroids Fusion for Tissue Engineering Applications
Controlling PCL Fiber Diameter, Morphology and Crystallinity in Melt Electrowriting through Adjustment of Process Parameters
Convergence of Biofabrication and Microphysiological Organ-on-a-Chip Technologies for High Throughput Screening
Convergence of Technologies: The Next Step in Biofabrication
Cranial Bone Regeneration using Printer-designed Scaffold with Human Dental Pulp Stem Cells
Design and Optimization of an Orthopedic Lattice-based Hemiprosthesis for the Proximal Humerus.
Design of Various Polymeric Fiber Architectures for Tissue Engineering via 3D Electro Jetting
Design Optimization of Braided Arterial Vascular Graft to Promote Neovessel Remodeling
Development of a Decellularized Extracellular Matrix Based Bio-ink Having an Enhanced 3D Printability
Development of a Device to Fabricate Sutures Coated with Functionalized Electrospun Nanofibers
Development of a Suspension Near-Field Electrospinning Technique for the Fabrication of Three-Dimensional Nanostructures
Development of a Universal Bioink Technology for Multi-Modality Bioprinting Compatibility and Support of Multiple Tissue Construct Types
Development of an Artifact for Assessing Bioink Printability
Development of an In Vitro Functional 3D Blood Brain Barrier Model For Use In A Brain Microfluidic Model
Development of Catechol Based Adhesive Bioink for 3D Printing
Development of Collagen Coated, Aligned Nanofiber Membrane for Enhanced Vascular Endothelial Barrier Function
Development of Nanostructured Alginate-Gelatin-Based Inks for 3D Bioprinting of Bone Cells
Development of Vascularized Outer Blood-Retinal-Barrier Model using 3D Cell Printing Technology
Differentiation of Pluripotent Stem Cells Towards Nephron Progenitor Cells for Bioprinted Renal In Vitro Model
Direct-write Additive Manufacturing and Characterization of Visible Light Crosslinkable GelMA\Laponite\Methylcellulose Hydrogel at Physiological Temperature
Directed Collective Cell Migration using Three-Dimensional Bioprinted Micropatterns on Thermoresponsive Surfaces for Myotube Formation
Drawing Creatively within the Lines: Regulatory Approaches for Emerging Regenerative Medicine Therapies
Drug Response of Scaffold-free Cardiac Constructs Fabricated using Bio-3D Printing
Dual Crosslinking of Methacrylated Hyaluronic Acid
Effect of Dexamethasone on the 3D Print Quality and Degradation of a Soft Amorphous Polyester
Effect of Fluid-flow Induced Shear Stress on Fibroblast-like Synoviocytes in a Bioinspired synovium On-chip
Effects of the Protein Folding State on the Mechanical Properties of Hydrogels Produced by Photoinduced Crosslinking of Unmodified Proteins (PICUP)
Electrohydrodynamic Printing of Sub-microscale Fibrous Architectures with Improved Cell Adhesion Capacity
Electrolyte Solution-assisted Electrospray Deposition : Improved Electrospraying Process for Direct Coating of Nanoparticles with High Deposition Efficiency
Electrospinning Methods for the Production of Resorbable Bifurcated Vascular Grafts: Influence of Process Parameters on Mandrel Adherence and Mechanical Properties
Eluting Moulds for Patient Specific Graft Fabrication
Emulsion Inks for 3D Printing of Tissue Engineering Scaffolds
Endothelial Cells Support Osteogenesis in a Vascularized 3D Bioprinted In Vitro Bone Model
Engineered Bi-layered Microfibre Reinforced Hydrogel for Zonal Cartilage Repair
Engineering a Living Kidney Proximal Tubule via Melt Electrowriting
Engineering Vascularized Islet-mimetic Organoid from Human Pluripotent Stem Cells
Entangled Inks – An Easy and Fast Approach to 3D Bioprint Macroporous Hydrogel Scaffolds
Equalized Flow through Microchannels of Bioreactor SSuPer Modules
Evaluation of Laminin and Fibronectin Impact on Metastasis in a Tumor-on-a-Chip Microfluidic Platform
Fabrication and Characterization of Three-layered Composite Nerve Repair Conduit via Electrohydrodynamic Jetting, Dip-coating, and Electrospinning
Fabrication of a Graded Micropillar-arrayed Surface for Guided Cell Migration
Fabrication of a Microfluidic-nanofibers Based Cell Culture Platform for Hepatocellular Carcinoma
Fabrication of All-nanofiber, Hybrid-type Nanofiber Mat for the Development of the Multi-layered Cardiac Patch
Fabrication of Calcium Phosphate 3d Scaffolds for Bone Repair using Magnetic Levitational Assembly
Fabrication of Collagen Fibril Surface using Core (PCL)-shell (gelatin/PVA/ceramic) Scaffold
Fabrication of Scaffold Composed of Methacrylated Photo-crosslinkable Alginate/decellularized Extracellular Matrix
Fabrication of Scaffolds with Engineered Multiscale Prevascular Networks
Facile Biofarbication of Complex Multilayered Tubular Constructs
Femtosecond Laser Induced Densification within Cell-laden Hydrogels Results in Cellular Alignment
Finding the Balance between Cell Functionality and Shape Fidelity of 3D Bioprinted Constructs
Formulating for 3D Printing: High Throughput Screening of Inks for Inkjet 3D Printing Multi-functional Drug Delivery Implants
Freeform Reversible Embedding 3D Printing of Carbon Fiber Reinforced Epoxy Composites
FRESH 3D Bioprinting of Trachea Scaffolds using Decellularized Extracellular Matrix
FRESH 3D Printing a Contractile Model of the Human Left Ventricle
Gelatin Based Bioink Formulations for 3D Bioprinting
Glucosamine-grafted GelMA Hydrogels as Potential Biomaterials for Cartilage Repair
High-precision Inkjet Technology with Biocompatible Hydrogel
High Resolution Vascular Structures Produced by Inkjet Printing
How to Determine a Suitable Sodium Alginate for the Fabrication of Standardized Alginatedialdehyde-Gelatin Crosslinked Hydrogels in Biofabrication Approaches?
Human Platelet Lysate-based Bioink for Wound Healing Application
Human Villi-on-a-Chip with Capillary on 3D-Printed Scaffolds
Hyaluronan/Collagen Bioink with Controlled Microscopic Anisotropy Modulating Cell Behavior
Hyaluronic Acid- ECM Biomimic Peptide Hydrogel for Study of Liver Fibrosis
Hybrid Bioink 3D Printing for Soft Tissue Grafts
Hybrid Decellularized Matrix-Polylactic Acid Microsphere Embedded Injectable/ 3D Printable System for Osteochondral Regeneration
Hybrid Laser Platform for Printing 3D Multiscale Multi-material Hydrogel Structures
Hybrid Melt Electrospun Writing PCL and Hydrogel Scaffolds for Wound Healing Applications
Hybrid Printing using Cellulose Nanocrystals Reinforced Hydrogels for Cartilage Tissue Engineering
Impact of Pore Architectures in 3D Printed Bioceramic Scaffolds on Orthotopic Bone Regeneration in an Equine Model
Improving Cellular Replacement Therapy for Parkinson`s Disease using 3D Nanofibrous Ultrashort Self-assembling Peptide Based Scaffolds
In Vivo Evaluation of 3D Bioprinted Osteochondral Implants with Hierarchical Fiber Orientation and Cellular Distribution
In Vivo Outcome of Bioprinted Cartilage Tissue using an Advanced Enzymatically Crosslinkable Bioink
Induction of Designed Micro-vascular Network with 3D Bioprinting
Integration of Full-thickness Bioprinted Skin Accelerates Epidermal Stratification and Normal Tissue Formation
Investigation of Dielectric Impedance Spectroscopy for Layer-wise Non-destructive Monitoring of Cell Viability in 3D Bioprinting
Investigation of Dielectric Spectroscopy as an Enabling Tool for Process Analytical Technology in 3D Biofabrication
Is There an Optimum in the Design of Alginate-based Composite Bioinks for 3D Bioprinting Regarding the Filler Concentration?
Label-free Detection of Cell Viability for Drug-response Relationship in 3D Cellular Constructs via Dielectric Spectroscopy
Laser-assisted Bioprinting Based Approach for the Study of Cell Plasticity in the Scope of Pancreatic Cancer
Ligament Reconstruction using Scaffold-free Cell Construct Produced by Bio Three-dimensional Printer.
Low-Cost 3D Printing of Corneal Stroma Scaffolds
Magnetic Levitational Biofabrication in Space
Main Parameters for Biofabrication by Material Extrusion Process
Manufacturing of Functional Tissues In Vitro using Bioprinting and Bioreactors. Application in Bone Tissue Regeneration
Mapping the Ovarian Matrisome to Better Inform an Engineered Bioprosthetic Ovary
Mechanical Modelling Provides Versatile Design Tools for Composite Scaffold Biofabrication
Mediated Electrochemical Biofabrication Mimicking Oxidative Matrix Assembly
Mesoporous Bioactive Glass with Improved Osteogenic and/or Antibacterial Properties for 3D Printing and Bioprinting
Micro-3D-printing of Biological Cell Niches
Micro-machining of Natural Polymers for use as Scaffolds and Tissue-on-a-Chip Applications
Microstructural Characteristics of the Peripheral Nerve Endoneurium for Biomimetic Scaffold Design
Microvessel Structures Based on Thermoresponsive Polyoxazolines for Biofabricated Tissue Models: Efficacy of Network Endothelialization
Miniature 3D Bioprinting of Neural Stem Cells on Pillar Plates for Developmental Neurotoxicity Assays
Model of Patient-specific Immune Enhanced Tumor Organoids for Immunotherapy Screening
Modification of PDMS Rheology and Machine Pathing to Improve Freeform Reversible Embedding
Nano-and Microfabricated Hydrogels for Regenerative Engineering
Neural Cell Integration into 3D Bioprinted Skeletal Muscle Constructs for Restoration of Muscle Function
Novel Strategy for the Biofabrication of a Thick, Functional, 3D Vascularized Hepatic Tissue Model
On-chip 3D Printing of a Blood-brain Barrier Model
Over-five-millimeter Diameter Alginate-collagen Endothelialized Tubular Scaffold Formation for Large Diameter Blood Vessel Fabrication
Patient-specific Modeling of Transcatheter Aortic Valve Replacement
Personalized Completely Biodegradable Stent Fabricated by 3D Printing
Personalized Tumor Model: From Patient Tumor to Three-dimensional Printing of In Vitro Model and Drug Testing
Physics of Cellular Self-Assembly – A Microscopic and Mathematical Model for Faster Maturation of Bioprinted Tissues
Physiological Three-dimensional Bioprinting and Culturing of Mouse Myoblasts within Ultrashort Peptide Scaffolds
Potentials Assessment of Spinal Cord Tissue Derived Bioink in Printing Induced Pluripotent Stem-cell Derived Motor Neuron Printing for the Fabrication of Neuromuscular System
Predictive Modeling of the Dynamics of Multicellular Systems
Preparation of Nanofibrous Collagen Coated PCL Surface to Enhance Myotube Formation
Printing Complex Sustainable Constructs using Self-assembling Ultrashort Peptides
Rapid 3D Printing of Functional Nanoparticle-enhanced Conduits for Effective Nerve Repair
Real Time Imaging of Local Oxygen Concentrations Enables Evaluation of Oxygen Diffusion in Hydrogel Bioinks and Cell Metabolism in 3D Bioprinted Constructs
Recombinant Human Type I Collagen - A Flexible BioInk Platform for 3D-Bioprinting
Regenerative Medicine: Current Concepts and Changing Trends
Revealing Critical Parameters for Predicting the Bioprintability of Hydrogel Systems
Rotator Cuff Regeneration with a Graded Biomimetic Patch using 3D Cell Printing Technology
Soft Tissue Bionics Biofabrication and Engineering Anatomy
Spatio-Temporal Modulation of Oxygen Gradients in Biofabricated Gelatin-Heparin Constructs for Zone Specific Tissue Alignment and Homogenous Hyaline Cartilage Regeneration
Stromal Cells Promote Neovascular Invasion Across Tissue Interfaces
Structuring Bioinks with Subcellular Resolution
Supplementation of an Alginate/methylcellulose Bioink with Human Plasma Strongly Stimulates Human Mesenchymal Stem Cells in a Bioprinted Bone-like, Mineralized Tissue Construct
Supramolecular Biofabrication of Functional Hierarchical Fluidic Devices
Sustained Perfusion for Improved Long-term Viability in Large Bioprinted Constructs
Synthesis and Characterization of Naturally Derived Bioinks for 3D Bioprinting
Synthesis and Photocrosslinking of Unsaturated Polymers Derived From Isosorbide for 3D Printing Applications
Synthetic Building Blocks for Injectable Regenerative Materials
Temperature-responsive Self-folding Fibrous Scaffold for Vascularization using 4D Bioprinting
The Construction of GBM Invasion Model Based on 3D Bioprinting
The Effect of Aligned Extracellular Matrix Nanofibers Combined with 3D Printed Micropatterned Poly(lactide-co-glycolide) Scaffold on Skeletal Muscle Cell Orientation and Maturation
The Effect of BMP-mimetic Peptide-tethering Bioinks on the Differentiation of Human Dental Pulp Stem Cells in the Bioprinted Dental Construct
The Role of IL-10 in Host Response to Tissue Engineered Vascular Grafts
The Use of Thermal Inkjet Printed Cell Activation for Tissue Engineering and Cancer Models
Thermally Insensitive Gelatin-based Bioinks for Visible Light Stereolithography 3D Bioprinting
Three Dimensional Monolayer Culture of Epithelial Cells on Poly(vinyl alcohol) Nanofibrous Membrane Containing Integrin-binding Ligands
Tissue adhesive bioink as cell carrier and cartilage-binding glue for bioprinting and chondral regeneration
To Be Announced
Tunable Multifunctional Bioinks for 3D Printing Applications in Bone Regeneration
Ultrasound-assisted Bioprinting of Preferentially Aligned 3D Cellular Constructs
Universal Nano-carrier Ink for Biomaterials Additive Manufacturing
Using Chaotic Printing to Fabricate Microstructure at High Resolution and Speed
Utilization of Micro-tumor Constructs for Testing of Chemotherapy Regimens
Validation of Synthetic and Decellularized Matrix Hybrid Spiral for Long Segment Tracheal Reconstruction
Volume-by-volume Bioprinting of Chondrocytes-alginate Bioinks in High Temperature Thermoplastic Scaffolds for Cartilage Regeneration


Questions about ProgramMaster? Contact programming@programmaster.org